Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

No 3D with X1650Pro

  
   Hardware Problem Solving Community! (Home) -> ATI RSS
Related Topics:
X1650Pro's in crossfire - Hi ppl, It's come time for me to update my terrible 256Mb 7300GS Noobvidia card, and would really a little info from anyone who is running a pair of 256Mb DDR3 in as I can stretch my tight little budget a little to..

Upping core voltage on 9800 Pro/XT - My 9800 Pro (with R360 core but Pro PCB, which I believe is a BBA) now has an XT BIOS. (If you're I had more luck in the end with a BIOS I found for an HIS card modified with a 128MB limit, than the modified Club3D BIOS that many people seem..

x800 pro to XT Hard mod - Guys, I have been thinking about doing this mod for some time now. I currently own a Sapphire x800 pro. It has a blue board which is different to what alot of the sapphire boards are, and in most of the people who have done the hard mod have..

ATI WDM TV Audio Crossbar service failed to start - OK, this may push me over the edge... After flogging this AIW 9600XT for the past week trying to at least get it to boot (no video signal, same as has afflicted many others) I finally got running. Just can't power it off without..

Win2k hang on boot: multiple processors w/AGP card - I recently bought an AGP card with a DVI port to use with a DVI KVM switch (also using DVI out from The AGP card seems to be causing a hang just prior to the initial W2k boot screen. Here are the facts: Win2k Advanced Server AMD
Next:  Gigabyte GA-965P-DS3 "SYSTEM" temp  
Author Message
Augustus

External


Since: Jan 21, 2006
Posts: 122



(Msg. 1) Posted: Wed Oct 10, 2007 7:45 pm
Post subject: No 3D with X1650Pro
Archived from groups: alt>comp>periphs>videocards>ati (more info?)
Got a problem I've never run into before....installed a Diamond X1650 Pro
512Mb AGP card into my older Barton 3200 / Soltek Nforce2 AGP8X / 9800 Pro
128Mb box running XP Pro. Unisntalled the drivers before shutdown, put in
the new card, all power connectors hooked up, booted up and installed the
latest Catalysts with CCC. Works perfectly, but no 3D, period. Try running
ATI tool artifact finder, won't run. Try running 3Mark05, system does hard
reboot when going into 3D. D/l and installed DX 9.0c and also got the latest
Nforce2 drivers and installed them, no difference. Everest home shows blank
screens when clicking on the GPU. 2D is fine, ATI tool shows correct default
speeds for the card The identical card I stuck in an older Dell box never
gave issues. Any ideas would be appreciated. The system has never been
glitchy or unstable. P/S is a generic 420W.

 >> Stay informed about: No 3D with X1650Pro 
Back to top
Login to vote
First of One

External


Since: Mar 14, 2007
Posts: 155



(Msg. 2) Posted: Wed Oct 10, 2007 11:08 pm
Post subject: Re: No 3D with X1650Pro [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
You installed this driver (more specifically, GART driver 4.36 included in
the package)?
http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

What does Everest say about your mobo's AGP slot status? Should be something
along the lines of "4x (8x capable)".

--
"War is the continuation of politics by other means.
It can therefore be said that politics is war without
bloodshed while war is politics with bloodshed."


"Augustus" <no_one DeleteThis @nowhere.net> wrote in message
news:FXcPi.5687$GO5.201@edtnps90...
> Got a problem I've never run into before....installed a Diamond X1650 Pro
> 512Mb AGP card into my older Barton 3200 / Soltek Nforce2 AGP8X / 9800 Pro
> 128Mb box running XP Pro. Unisntalled the drivers before shutdown, put in
> the new card, all power connectors hooked up, booted up and installed the
> latest Catalysts with CCC. Works perfectly, but no 3D, period. Try running
> ATI tool artifact finder, won't run. Try running 3Mark05, system does hard
> reboot when going into 3D. D/l and installed DX 9.0c and also got the
> latest Nforce2 drivers and installed them, no difference. Everest home
> shows blank screens when clicking on the GPU. 2D is fine, ATI tool shows
> correct default speeds for the card The identical card I stuck in an older
> Dell box never gave issues. Any ideas would be appreciated. The system has
> never been glitchy or unstable. P/S is a generic 420W.
>

 >> Stay informed about: No 3D with X1650Pro 
Back to top
Login to vote
Augustus

External


Since: Jan 21, 2006
Posts: 122



(Msg. 3) Posted: Thu Oct 11, 2007 5:43 am
Post subject: Re: No 3D with X1650Pro [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"First of One" <root.DeleteThis@127.0.0.1> wrote in message
news:L-udnXUG1tylOpDanZ2dnUVZ_vbinZ2d@giganews.com...
> You installed this driver (more specifically, GART driver 4.36 included in
> the package)?
> http://www.nvidia.com/object/nforce_udp_winxp_5.10.html
>
> What does Everest say about your mobo's AGP slot status? Should be
> something along the lines of "4x (8x capable)".

Yep, those are all installed. Including the GART 4.36....and Everest has
completely blank screens under PCI/AGP and GPU which I've never seen. The
device manager shows a proper device install, and CCC shows functioning
AGP8X mode and no issues. I'm wondering if the generic 4 year old 420W ATX
p/s is flaky and not pulling enough juice to the card when it kicks into 3D
mode.
 >> Stay informed about: No 3D with X1650Pro 
Back to top
Login to vote
Augustus

External


Since: Jan 21, 2006
Posts: 122



(Msg. 4) Posted: Thu Oct 11, 2007 6:03 am
Post subject: Re: No 3D with X1650Pro [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"First of One" <root.TakeThisOut@127.0.0.1> wrote in message
news:L-udnXUG1tylOpDanZ2dnUVZ_vbinZ2d@giganews.com...
> You installed this driver (more specifically, GART driver 4.36 included in
> the package)?
> http://www.nvidia.com/object/nforce_udp_winxp_5.10.html
>
> What does Everest say about your mobo's AGP slot status? Should be
> something along the lines of "4x (8x capable)".

Just ran Dxdiag.exe and the unit failed all 3 Direct3D tests at step 8
"Failed to initilliaze 3D device". Directdrwa passes all tests. Sandra 2007
sees the X1650 Pro fully functional and running in AGP8X mode. So I'm at a
loss...
 >> Stay informed about: No 3D with X1650Pro 
Back to top
Login to vote
Quad_Damage

External


Since: Oct 11, 2007
Posts: 1



(Msg. 5) Posted: Thu Oct 11, 2007 9:03 am
Post subject: Re: No 3D with X1650Pro [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Augustus" <no_one.RemoveThis@nowhere.net> wrote in message
news:H0jPi.12216$%B2.9256@edtnps82...
>
> "First of One" <root.RemoveThis@127.0.0.1> wrote in message
> news:L-udnXUG1tylOpDanZ2dnUVZ_vbinZ2d@giganews.com...
>> You installed this driver (more specifically, GART driver 4.36 included
>> in the package)?
>> http://www.nvidia.com/object/nforce_udp_winxp_5.10.html
>>
>> What does Everest say about your mobo's AGP slot status? Should be
>> something along the lines of "4x (8x capable)".
>
> Just ran Dxdiag.exe and the unit failed all 3 Direct3D tests at step 8
> "Failed to initilliaze 3D device". Directdrwa passes all tests. Sandra
> 2007 sees the X1650 Pro fully functional and running in AGP8X mode. So I'm
> at a loss...
>


Try to install older drivers, 7.5 i believe.
 >> Stay informed about: No 3D with X1650Pro 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> ATI All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]