4PDA2+ and the Zalman CNPS7000A?

Has anybody out there put one of these on their 4PDA2? Either the aluminum
with copper or the more expensive all copper one? I was wondering if it
cleared the capacitors and the passive HS on the northbridge. I measured as
best I could but it's hard to tell. I'll probably go ahead anyway but, it
would be nice to hear from someone who has experience with this cooler and
board. Oh and I do have the necessary clearance below the PSU. It's just
those pesky caps and the heat sink I'm worried about. Any info would be
greatly appreciated. Thanks.

mc
We're all waiting as fast as we can.

mc, check out this link for mobo compatibility issues:

<a style='text-decoration: underline;' href="http://www.zalman.co.kr/usa/product/cnps7000a-478_motherboard_list.html" target="_blank">http://www.zalman.co.kr/usa/product/cnps7000a-478_motherboard_list.html</a>

I can't speak personally to the Zalman CNPS7000A, but I have one of their
CNPS5700D-CU HSF units on my 4PDA2+ board and even w/ that large
shroud on it there's no clearance issues.

Jeff

"Mavra Chang" <notfromhere DeleteThis @operamail.com> wrote in message
news:lGO7c.8424$tY6.238990@bgtnsc04-news.ops.worldnet.att.net...
 > Has anybody out there put one of these on their 4PDA2? Either the aluminum
 > with copper or the more expensive all copper one? I was wondering if it
 > cleared the capacitors and the passive HS on the northbridge. I measured
as
 > best I could but it's hard to tell. I'll probably go ahead anyway but, it
 > would be nice to hear from someone who has experience with this cooler and
 > board. Oh and I do have the necessary clearance below the PSU. It's just
 > those pesky caps and the heat sink I'm worried about. Any info would be
 > greatly appreciated. Thanks.
 >
 > mc
 > We're all waiting as fast as we can.
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->