56.72 drivers caused grey-out options

Hi

have a GF FX5700 and I've just installed the new Forceware 56.72 drivers and
in the nView desktop manager all tabs, except Desktop Management and
profiles, are greyed-out.

Should this be the case?

P4 3.2ghz+HT, 512MB PC3200 400mhz RAM / Asus P4P800SE 800mhz fsb, 200GB
SATA, Viewsonic VE710 TFT.

Also, after installing the driver I'm pretty sure the monitor takes longer
to go into sleep mode. Is this possible, or am I imagining it? It takes
around 20secs to switch into standby after the "No Signal" message appears.

Any ideas?

Cheers.

Nik.




--
=======================================================
Remove S P A M K I L L From my Email address to reply to me Directly
=======================================================

"Nik" <nik.walmsleySPAMKILL.DeleteThis@btinternet.com> skrev i melding
news:c93q2h$nuf$1@hercules.btinternet.com...
 > Hi
 >
 > have a GF FX5700 and I've just installed the new Forceware 56.72 drivers
and
 > in the nView desktop manager all tabs, except Desktop Management and
 > profiles, are greyed-out.
 >
 > Should this be the case?
 >
 > P4 3.2ghz+HT, 512MB PC3200 400mhz RAM / Asus P4P800SE 800mhz fsb, 200GB
 > SATA, Viewsonic VE710 TFT.
 >
 > Also, after installing the driver I'm pretty sure the monitor takes longer
 > to go into sleep mode. Is this possible, or am I imagining it? It takes
 > around 20secs to switch into standby after the "No Signal" message
appears.
 >
 > Any ideas?
 >
 > Cheers.
 >
 > Nik.
 >
 >
 >
 >
 > --
 > =======================================================
 > Remove S P A M K I L L From my Email address to reply to me Directly
 > =======================================================
 >
 >

Hi.
Can't you activate all the options, so the tabs aren't greyed out?

Karl-Olav Nyberg<!-- ~MESSAGE_AFTER~ -->