-5v Core Volate WAY too high

FAQ

Profile

-5v Core Volate WAY too high

Hardware Problem Solving Community! (Home) -> General Discussion

Next: 2 keyboards on a Mac?

Author

Message

Big H

External

Since: Aug 03, 2005
Posts: 1

(Msg. 1) Posted: Wed Aug 03, 2005 6:27 am Post subject: -5v Core Volate WAY too high Archived from groups: alt>comp>periphs>mainboard (more info?)

I was having problem with my pc shutting down on me at random, so I installed the monitoring software that came with my motherboard. Immediately, it showed that my -5v vcore voltage was too high, in the area of +3v. I recently bought a new power supply, an Enermax, would a faulty psu be the likely cause? I have also been having problems with my video card, not sure if that's related at all though. Thanks >> Stay informed about: -5v Core Volate WAY too high

Display posts from previous:

Related Topics:

New Board with Soft-core processor - MERLINO BOARD EMBEDDED SYSTEM. Flexible, reliable reconfigurable. The only limit to its application is only that of your imagination. How many times has your PC failed to boot because it is blocked by a prosaic problem? How many times have yo...

How to diagnose PC with black screen? - PC #1 Computer switches on, but screen remains black, no messages, no beeps. Tried the hard disk on another machine and it worked. Tried the network card on another machine and it worked. Tried 32MB DIMM memory module on another machine and it appears to...

SP2 865/875 Microcode Industry Failure? - A very interesting thing has come up regarding SP2 and the motherboard industry in general. An anomaly was detected in the installation of XP SP2 on Intel 865/875 chipset mobos. After SP2 install most all such mobos from most all mfgs would HANG on..

bios recovery on DR737 motherboard - Hello, We have a Micron Millennium system with the DR737 motherboard. While attempting to upgrade the BIOS, the incorrect flash disk was used and locked up in the middle of the re-programming process. Now the system will not POST (we turn the system..

GA-BXC motherboard query - can any one tell me why this board has two sets of front panel headers?? ie power, reset, HD led, etc etc on set is laid out in a line along the back of the board and the other in two lines right next to it.....i really just want to know which set to..

	Hardware Problem Solving Community! (Home) -> General Discussion	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum