7NJL6 and MB monitor

Please post your MB setup with the board on this
forum, or the MB site. I'll look at SpeedFan.

--
- Zilla
Cary, NC USA
(Remove XSPAM)


"Guy" <no.RemoveThis@spam.invalid> wrote in message
news:OWlmf.301874$7k1.47138@fe12.news.easynews.com...
> I installed MBM 5.3.7.0 and it does not have a config for the 7NJL6,
> so I tried a 7NJL3. It only reports the CPU speed, no temps. I think
> I will leave it installed and play with it some....
>
> Meanwhile, I use SpeedFan 4.20, and it reports temps on the CPU, north
> bridge, and hard drives.
>
 >> Stay informed about: 7NJL6 and MB monitor 

Z,

I cannot get the program to report any temps at all. It recognizes
the chipset (LM90), but does not recognize the $4 address. So, no
point in me posting that data.

I tried the 7NJL3 and 7NJS settings, neither worked. After
exhaustively reading the help file, I get the impression that the
developer needs to add somehting to cover each board or chipset.
 >> Stay informed about: 7NJL6 and MB monitor 

Yes that was my experience.

Did you say you used SpeedFan in the meantime?
That app does NOT support CT 7NJL6 so how did
you make it work? (At least it's not on their list of
supported m/b's)

--
- Zilla
Cary, NC USA
(Remove XSPAM)


"Guy" <no RemoveThis @spam.invalid> wrote in message
news:qIhnf.46537$1q6.15125@fe02.news.easynews.com...
> Z,
>
> I cannot get the program to report any temps at all. It recognizes
> the chipset (LM90), but does not recognize the $4 address. So, no
> point in me posting that data.
>
> I tried the 7NJL3 and 7NJS settings, neither worked. After
> exhaustively reading the help file, I get the impression that the
> developer needs to add somehting to cover each board or chipset.
>
 >> Stay informed about: 7NJL6 and MB monitor 

Speedfan has no configuration utility; it apparently reads the NForce2
bus by default. It definitely takes some getting used to.
 >> Stay informed about: 7NJL6 and MB monitor