Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

AGP Voltage on IC7-Max3

  
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  Tried to update drivers on nf7s...  
Author Message
Ivan

External


Since: Feb 13, 2004
Posts: 17



(Msg. 1) Posted: Wed Feb 04, 2004 5:15 pm
Post subject: AGP Voltage on IC7-Max3
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
AGP voltage is set to 1,55 V on my IC7-Max3.

Is this enough or too much (for a Radeon 9600 Pro)?

 >> Stay informed about: AGP Voltage on IC7-Max3 
Back to top
Login to vote
McCrack

External


Since: Jan 23, 2004
Posts: 20



(Msg. 2) Posted: Wed Feb 04, 2004 5:15 pm
Post subject: Re: AGP Voltage on IC7-Max3 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Wed, 4 Feb 2004 14:15:33 +0100, "Ivan" <ivan.vukas DeleteThis @zg.tel.hr>
wrote:

 >AGP voltage is set to 1,55 V on my IC7-Max3.
 >
 >Is this enough or too much (for a Radeon 9600 Pro)?
 >
AGP is rated for 1.5v so 1.55v is fine. I bump mine up to 1.6v just to
make sure it is getting enough juice, but upping the voltage also
increases the heat.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: AGP Voltage on IC7-Max3 
Back to top
Login to vote
Ivan

External


Since: Feb 13, 2004
Posts: 17



(Msg. 3) Posted: Thu Feb 05, 2004 12:58 am
Post subject: Re: AGP Voltage on IC7-Max3 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanx!

Raising to 1.6 V would certainly take the sting out of power shortage.

On the other hand, I hope 1.6 V is not harmful for the card.

"McCrack" <no DeleteThis @email.here> wrote in message
news:qpk22059f2up9m7h6nqjg8ohgd3kckd1ta@4ax.com...
 > On Wed, 4 Feb 2004 14:15:33 +0100, "Ivan" <ivan.vukas DeleteThis @zg.tel.hr>
 > wrote:
 >
  > >AGP voltage is set to 1,55 V on my IC7-Max3.
  > >
  > >Is this enough or too much (for a Radeon 9600 Pro)?
  > >
 > AGP is rated for 1.5v so 1.55v is fine. I bump mine up to 1.6v just to
 > make sure it is getting enough juice, but upping the voltage also
 > increases the heat.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AGP Voltage on IC7-Max3 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
IC7-Max3 or CPU problem? - After installing my IC7-Max3 mobo and Intel P4 2.6 CPU, I powered it up and I get...nothing. I get the power lights on the mobo and all of the fans come on, but no video, no beep codes from the speaker, nothing. The monitor doesn't stay alive (goes to..

HT not working on IC7-Max3 - Hello there HT wont work in WinXP, but it is enabled in Bios. When Bios posts it says HT enabled. I have tried the latest bios but it didnt help. Got any ideas??? My system: 3.066 P4 533 Abit IC7-Max3 MSI GeforceFX 5900 512 MB Kingston PC3200 Regards...

Any IC7-Max3 Firewire Success? - Two folks recently posted here that they have burned up equipment on the built-in 1394 port on their IC7-Max3. I just finished a Max3 build and I do a lot of video editing with an expensive camera and don't want to do a smoke test. Any one use this..

Max3 CPU Temp and PS Issue - Thought others might have some information/interest. I was having some stability issues and so I started to pay close attention to voltage settings. Bumped DDR VCC up to 2.7 volts for stabilty , CPU Vcore at 1.55. I'm worried my Antec True380 may be..

Further ClarificationIC7-Max3 SATA - Am I to understand that loading the IAA via F6 w/OS install does not provide all of the software application (such as a RAID GUI) and that a reinstallation of the software at : ..
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]