Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

AK32A USB problem

  
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Next:  AN35Ultra, Barton 2500, 9600XT  
Author Message
Jim Strand

External


Since: Dec 21, 2003
Posts: 6



(Msg. 1) Posted: Sun Dec 21, 2003 5:16 am
Post subject: AK32A USB problem
Archived from groups: alt>comp>periphs>mainboard>shuttle, others (more info?)
USB ports 2 & 3 won't recognize anything attached to them. BIOS is
set for all USB. Checked the cables to ensure they were connected
identical to my other AK32A box which works perfectly.

Wondering if others have had a similar problem and what the fix, if
any, was.

 >> Stay informed about: AK32A USB problem 
Back to top
Login to vote
Jose2

External


Since: Dec 22, 2003
Posts: 1



(Msg. 2) Posted: Tue Dec 23, 2003 12:57 am
Post subject: Re: AK32A USB problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
To tell you the truth, I have the same problem. Mines is on the usb's that
are on my case, I connected them how it's showing in the picture of my
manual. I don't know what else to try or do???

"Jim Strand" <chief_jim.TakeThisOut@go.nospam.com> wrote in message
news:ab0auv8a60jgm94ncdjcj1v66qjcq74iqt@4ax.com...
 > USB ports 2 & 3 won't recognize anything attached to them. BIOS is
 > set for all USB. Checked the cables to ensure they were connected
 > identical to my other AK32A box which works perfectly.
 >
 > Wondering if others have had a similar problem and what the fix, if
 > any, was.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: AK32A USB problem 
Back to top
Login to vote
Dennis Roark

External


Since: Apr 13, 2004
Posts: 9



(Msg. 3) Posted: Tue Dec 23, 2003 6:45 am
Post subject: Re: AK32A USB problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Jose" <jofrnand.RemoveThis@bellsouth.net> wrote in
news:q7OFb.9864$n01.393@bignews5.bellsouth.net:

 > To tell you the truth, I have the same problem. Mines is on the usb's
 > that are on my case, I connected them how it's showing in the picture
 > of my manual. I don't know what else to try or do???
 >
 > "Jim Strand" <chief_jim.RemoveThis@go.nospam.com> wrote in message
 > news:ab0auv8a60jgm94ncdjcj1v66qjcq74iqt@4ax.com...
  >> USB ports 2 & 3 won't recognize anything attached to them. BIOS is
  >> set for all USB. Checked the cables to ensure they were connected
  >> identical to my other AK32A box which works perfectly.
  >>
  >> Wondering if others have had a similar problem and what the fix, if
  >> any, was.
 >
 >
 >

I am using the USB ports of an AK32E board without problems. What is
your OS? If Win XP, and if you go to the device manager does it show
the USB drivers working, or is there the yellow exclamation symbol
indicating a driver problem? This is obvious and I presume you both
have checked this already, but just in case ...

--
Dennis Roark

denro.RemoveThis@sio.NOSPAMmidco.net
Starting Points:
<a style='text-decoration: underline;' href="http://sio.midco.net/denro/www" target="_blank">http://sio.midco.net/denro/www</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK32A USB problem 
Back to top
Login to vote
Jim Strand

External


Since: Dec 21, 2003
Posts: 6



(Msg. 4) Posted: Tue Dec 23, 2003 2:12 pm
Post subject: Re: AK32A USB problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Tue, 23 Dec 2003 03:45:17 -0000, Dennis Roark
<denro.RemoveThis@NOSPsio.midco.net> wrote:

 >
 >I am using the USB ports of an AK32E board without problems. What is
 >your OS? If Win XP, and if you go to the device manager does it show
 >the USB drivers working, or is there the yellow exclamation symbol
 >indicating a driver problem? This is obvious and I presume you both
 >have checked this already, but just in case ...

Device Manager claims all are running perfectly.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK32A USB problem 
Back to top
Login to vote
EGK

External


Since: Jun 28, 2003
Posts: 54



(Msg. 5) Posted: Tue Dec 23, 2003 4:02 pm
Post subject: Re: AK32A USB problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Tue, 23 Dec 2003 11:12:03 GMT, Jim Strand <chief_jim.TakeThisOut@go.nospam.com>
wrote:

 >On Tue, 23 Dec 2003 03:45:17 -0000, Dennis Roark
 ><denro.TakeThisOut@NOSPsio.midco.net> wrote:
 >
  >>
  >>I am using the USB ports of an AK32E board without problems. What is
  >>your OS? If Win XP, and if you go to the device manager does it show
  >>the USB drivers working, or is there the yellow exclamation symbol
  >>indicating a driver problem? This is obvious and I presume you both
  >>have checked this already, but just in case ...
 >
 >Device Manager claims all are running perfectly.

Device manager will show them working perfectly if they're enabled in the
bios even if no cables are connected to them. I have a 32L board and the
two standard usb work perfectly. I added cables to a couple of the usb
connectors on the motherboard to add more and they are also working
perfectly. My only suggestion is make sure you have the pin-outs going the
right way.


----------------------------------------------------------------------------

"There would be a lot more civility in this world if people
didn't take that as an invitation to walk all over you"
- (Calvin and Hobbes)<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK32A USB problem 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Beeping AK32A - Help please! - Hi, I have a Shuttle AK21A V2.1 with an AMD Duron 1300, 256Mb PC 2100, AGP 4X Card, Award BIOS. After it was lent to a friend it now will not boot and I see nothing on the screen! I used the jumper to clear the CMOS to 'factory' setting but it doesn't....

AK32A V2.1 error on OS load - Have tried to load Win95, Win98, and a ME upgrade. Get the same kind of error each time. It almost completely loads. Sometimes goes to "Safe Mode". Get "While intializing device IOS, Windows protection error, must restart computer&quot...

Problem Adding PCI NIC - Hi, I've got a Shuttle XPC SN45G ...this one: http://us.shuttle.com/specs2.asp?pro_id=279 I'd like to use my old 3Com 10/100 PCI NIC instead of the integrated one but I can't seem to get it to work. I'm running Win98SE and every time I try to add th...

USB port problem...please help - I have the SN41G2...it has two Front USB ports. When i plug in devices in the other one, like usb drives, irda etc..it works fine. But the other port, i plug those same devices and i get the 'USB device not recognized' error. What's wrong here?? Is the....

AK-39N, problem booting - Hi, I have an AK-39N which replaced a burned out mobo and power supply. I tried to use my old Athlon 1000 in the mobo, but I kept getting errors in WinME and WinXP upgrade wouldn't load without errors (both upgrade from WinMe and fresh install on a new....
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]