 |
|
|
|
Next: quick case mount question
|
| Author |
Message |
External
Since: Oct 07, 2005
Posts: 14
|
(Msg. 1) Posted: Thu Nov 10, 2005 11:09 am
Post subject: AN8 system temps
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
|
|
|
My system has been basically all out doing prime95 torture tests for
about 4 days and now the system temps are in the low-mid 40C range.
The CPU temp is generally only a few degrees warmer than the system
temps. The room is quite warm ATM, but still... Is this acceptable,
or should I look at increasing case cooling?
I notice when the PC is booting, the fan noise is quite loud, almost
like a mini-vac, but when I get into Windows, the fans slow down a lot.
I am not sure exactly what is controlling the fan speed here. I
haven't really done anything with the OC Guru, and it is not set to
load at OS start, but would that be it, anyway?
Are these temps anything to worry about? Certainly higher than any
systems I have dealt with in the past.
Thx,
Gerald |
|
| Back to top |
|
 | |
External
Since: Oct 07, 2005
Posts: 14
|
(Msg. 2) Posted: Fri Nov 11, 2005 7:20 am
Post subject: Re: AN8 system temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Look... I know some chips run hotter than others and what have you.
But I am unfamiliar with what to expect with this particular board and
CPU, which is why I thought I would ask here. I know its an assinine
question that's probably been asked many times before. The problem
with search engines is that if you search on keywords like Athlon 64
and AN8 and temperature, etc, you wind up having to sift through
86,000,000,000 posts to find one of the 20,000,000 that actually
answers your question.
I'll admit: I am a lazy SOB. It's a lot easier for me just to ask and
hope somebody pleasant will answer. |
|
| Back to top |
|
| |
External
Since: Oct 07, 2005
Posts: 14
|
(Msg. 3) Posted: Fri Nov 11, 2005 7:26 am
Post subject: Re: AN8 system temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Not worried. The CPU temp seems fine. The case/system temps just seem
sort of high, especially the delta between them and the CPU are
sometimes negative if the CPU quits crunching. Temp readings depend on
how and where they are taken and every system is different. Maybe all
AN8s system temps read high or what have you. I would think that I
have plenty of case cooling, but maybe not.
I figured out that it was the vidcard fan that quietens down once the
OS loads. >> Stay informed about: AN8 system temps |
|
| Back to top |
|
| |
External
Since: Sep 17, 2005
Posts: 60
|
(Msg. 4) Posted: Fri Nov 11, 2005 9:55 am
Post subject: Re: AN8 system temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 10 Nov 2005 11:09:49 -0800, cgmoore RemoveThis @icx.net had a flock of green
cheek conures squawk out:
>My system has been basically all out doing prime95 torture tests for
>about 4 days and now the system temps are in the low-mid 40C range.
>The CPU temp is generally only a few degrees warmer than the system
>temps. The room is quite warm ATM, but still... Is this acceptable,
>or should I look at increasing case cooling?
>
>I notice when the PC is booting, the fan noise is quite loud, almost
>like a mini-vac, but when I get into Windows, the fans slow down a lot.
>
>I am not sure exactly what is controlling the fan speed here. I
>haven't really done anything with the OC Guru, and it is not set to
>load at OS start, but would that be it, anyway?
>
>Are these temps anything to worry about? Certainly higher than any
>systems I have dealt with in the past.
>
>Thx,
>Gerald
If your that worried, just send the pc to me...
I wish my p4c ran that cool.
Stephen
-- >> Stay informed about: AN8 system temps |
|
| Back to top |
|
| |
External
Since: Feb 06, 2004
Posts: 120
|
(Msg. 5) Posted: Sun Nov 13, 2005 3:55 am
Post subject: Re: AN8 system temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
<cgmoore.TakeThisOut@icx.net> wrote in message
news:1131649789.419688.286870@g43g2000cwa.googlegroups.com...
> My system has been basically all out doing prime95 torture tests for
> about 4 days and now the system temps are in the low-mid 40C range.
> The CPU temp is generally only a few degrees warmer than the system
> temps. The room is quite warm ATM, but still... Is this acceptable,
> or should I look at increasing case cooling?
>
> I notice when the PC is booting, the fan noise is quite loud, almost
> like a mini-vac, but when I get into Windows, the fans slow down a lot.
>
> I am not sure exactly what is controlling the fan speed here. I
> haven't really done anything with the OC Guru, and it is not set to
> load at OS start, but would that be it, anyway?
>
> Are these temps anything to worry about? Certainly higher than any
> systems I have dealt with in the past.
When you say the room temp is quite warm, what is the actual temp? 24C may
seem quite warm for you but 34C is quite warm for me. If my overclocked
XP2800 only ran about 10C above room temp, I'd be ecstatic! As it is, I am
happy with room temp + 17C for idle and +27C for 100% CPU usage.
Dave >> Stay informed about: AN8 system temps |
|
| Back to top |
|
| |
External
Since: Nov 08, 2005
Posts: 1
|
(Msg. 6) Posted: Mon Nov 21, 2005 2:55 pm
Post subject: Re: AN8 system temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
As far as I remember, once I upgraded the mobo bios the temps reported by u
guru changed a bit.
It seems the sensors can be (and probably are) reequilibrated as the new
mobo bios is released.
Maybe this is the case.... Have you tried upgrading it yet?
Pawel. >> Stay informed about: AN8 system temps |
|
| Back to top |
|
| |
| Related Topics: | max temps IS-7 - How hot may the pwr and nordbridge be? I used speedfan to lower the rpm of nordbridge , but now it gives these temps: NB 45° C PWR 44°C Is this to hot or is it ok (These are temps at light load) Tnx
Help with temps - Hey all, Can someone help me achieve better cooling? I have had my pc on for a few hours and I see the cpu is at 55c. I havent gamed either, although I was doing some multimedia stuff, but it seems a bit hot. I am using stock cooling on my 2500+, no..
CPU temps - Hi all - I have a Abit IS7-E with an Intel P4 2.4c CPU. The CPU normally runs around 98-100 F with the standard heatsink fan that came with the retail version of the CPU. I just recently put together an new PC with an IC7-G and an Intel P4 2.8c CPU..
AI-7 Temps - AI-7 Temps Looking to do some temp data comparisons. Mine seems hot. Keep in mind that I get same results at stock setings as my overclock settings. I am going to tell you alot about this system to answer as many questions in advance as possible. Here's...
Need temps for P4 3.4e Prescott in IS7 - Hi all! I just got my P4 3.4ghz Prescott chip (478 pin) up and running in my IS7 board, and I'm seeing some disturbing temperatures... I'm running a Speeze fan (copper core with silver thermal compound) which should perform better than the stock retail... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
