ASUS P4C800-e Voltage Reg.

FAQ

Profile

ASUS P4C800-e Voltage Reg.

Hardware Problem Solving Community! (Home) -> Overclocking

Next: Overclocking K6-2 450Mhz

Author

Message

RESloan

External

Since: Oct 31, 2003
Posts: 1

(Msg. 1) Posted: Fri Oct 31, 2003 5:05 pm Post subject: ASUS P4C800-e Voltage Reg. Archived from groups: alt>comp>hardware>overclocking (more info?)

I had just about decided to pick this board for a new system which I intend to OC. However, I just read a recent review(10-23)at thecrucible.ca which found that VR was poor on this board under load,e.g., Vcore volted down .25 volts. Hence they conclude that OCing would not be very reliable. Anyone have any comments on this? Wonder if they just got a bad board? -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- >> Stay informed about: ASUS P4C800-e Voltage Reg.

Display posts from previous:

Related Topics:

ASUS P4C800 - problems! - Hi, I got: - mb ASUS P4C800 Deluxe - cpu P4 2.8 HT FSB800 - graph Gainward GF4 PowerPack! Ultra/750-8X TV SE - memory 2x512 DDR400 Kingston HyperX CL2 NonECC (KHX3200/512) - hdd serial ata Seagate 7200.7 ST3120026AS (120GB) - power supply 300W - 1 optic...

ASUS P4C800-E Dlx, P4C 2.8GHz with Zalman CNPS7000A-Cu in .. - While buying a new CDR/W drive today, I saw the Zalman staring at me from a display case behind the counter...Snatched it up and got a tube of Arctic Silver 3 to go with. Anyone curious about how well the Zalman will fit on an ASUS P4C800-E Dlx in a..

how much can I up the voltage on my corsair ram - Here are my specs: p4c 2.8 Ghz 1gig corsair DDR400 (dual channel kit) CAS Lat 2. Abit Is7 Mobo Radeon X800 pro now previously I had this pc overclocked to 3.2 ghz with 512 meg of Geil ram. but the geil ram was running at 5:4 cpu:RAM FSB ratio. the..

Athlon Xp 2400 what voltage should i run it at ??? - Just like to know. I want to overclock my FSb to 140, which is stable with the ram i have.

agp vpltage and ddr voltage ?? - I am new to this so please forgive................ sys spcs GB GA-81K1100 board, 1gb pc2100 (until I get paid again) ram, GB Radeon 9800pro 256 agp card If agp 4 is approx 3 volts and 8X is 1.5 volts then would you DROP incoming voltage to OC the card?....

	Hardware Problem Solving Community! (Home) -> Overclocking	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum