ATI Options in Display Window -> TV Out

Hello,
I'm trying to enable the TV Out on my All-In-Wonder 9800 Pro. The
problem is that when I go to the Display control panel, Settings tab,
Advanced button, the ATI specific options aren't there. I know that
there used to be two rows of tabs with many specialized ATI settings,
but they somehow went away.

Short of reinstalling Catalyst and the drivers, does anyone know how I
can re-enable these options so that I can turn on my TV out?

Thanks!

jbickford3.TakeThisOut@enatai.net wrote:

> Hello,
> I'm trying to enable the TV Out on my All-In-Wonder 9800 Pro. The
> problem is that when I go to the Display control panel, Settings tab,
> Advanced button, the ATI specific options aren't there. I know that
> there used to be two rows of tabs with many specialized ATI settings,
> but they somehow went away.
>
> Short of reinstalling Catalyst and the drivers, does anyone know how I
> can re-enable these options so that I can turn on my TV out?

Most common cause of this is selecting the secondary display.

On the Settings tab of Display Properties, below the graw area with the
monitor arrangement, there is the word "display", with a box below it that
should be showing something like "2. (Multiple Monitors) on ATI Radeon 9800
Series", with drop down button on the right. Click the drop down button
and select "1" instead of "2" and then go to "advanced" and your ATI
specific settings should be back.

--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)