AU13 doesn't boot....

I bought a couple AU13s from fry's and can't get them to show the boot up screen.

I have tried exchanging every component, memory, processor, power supply,
video card, monitor, etc...

My setup is as follows : Processor+Heatsink, 512M DDR mem, ATX 350W
power supply, Mystique Video or NVidia FX, mouse + keybd as usual.

I'd hate to have to send the boards back, especially since I took them
to France where I live.

Can anyone help !!!!??????

Thanks
liaM

Liam,

Don't know if this is the same problem but I had an AU13 do the same
thing. Make sure the power supply you are using has the extra 4 pin 12
volt plug connected to the power supply. This is required on the AU13
in addition to the regular ATX power connector. I had to get another
power supply as my Sparkle 350 watt did not have this additional 12
plug.

Hope this helps.

Brad


lhooq RemoveThis @email.com (liaM) wrote in message news:<b521f944.0308071100.63c4446b RemoveThis @posting.google.com>...
 > I bought a couple AU13s from fry's and can't get them to show the boot up screen.
 >
 > I have tried exchanging every component, memory, processor, power supply,
 > video card, monitor, etc...
 >
 > My setup is as follows : Processor+Heatsink, 512M DDR mem, ATX 350W
 > power supply, Mystique Video or NVidia FX, mouse + keybd as usual.
 >
 > I'd hate to have to send the boards back, especially since I took them
 > to France where I live.
 >
 > Can anyone help !!!!??????
 >
 > Thanks
 > liaM<!-- ~MESSAGE_AFTER~ -->