Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

AV40 not posting after flashing BIOS

 
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Next:  beginners keyboard  
Author Message
noone14

External


Since: Nov 14, 2004
Posts: 2



(Msg. 1) Posted: Sun Nov 14, 2004 2:06 pm
Post subject: AV40 not posting after flashing BIOS
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)

I have flashed BIOS on my AV40 board, from version av40S025.bin to
av40S030.bin and now the board won´t boot at all, just a whirring sound when
the mb fans starts and stops.

The version of the board is the one without raid controller and mb revision
1.2

BIOS was downloaded from shuttles site.

I have tried removing the battery and resetting bios with jumper but with no
luck.

Any suggestions what to do?

Greetings Stig

 >> Stay informed about: AV40 not posting after flashing BIOS 
Back to top
Login to vote
Jonathan8

External


Since: Sep 06, 2004
Posts: 3



(Msg. 2) Posted: Thu Nov 18, 2004 11:17 am
Post subject: Re: AV40 not posting after flashing BIOS [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Is the motherboard in your system a dual-BIOS one? I don't know if Shuttle
is doing this or not, but many manufacturers are putting out dual-BIOS
boards so you can switch to an alternate/backup BIOS.

Otherwise, you should be able to do a BIOS recovery, as long as you have a
PS/2 keyboard and a floppy drive (on a real floppy controller, not USB).
Google for "award bios recovery" or something, I think you'll find it.

good luck,
Jonathan

"Stig Holmberg" <noone.TakeThisOut@nowhwere.com> wrote in message
news:aLIld.64891$Vf.3217943@news000.worldonline.dk...
 > I have flashed BIOS on my AV40 board, from version av40S025.bin to
 > av40S030.bin and now the board won´t boot at all, just a whirring sound
when
 > the mb fans starts and stops.
 >
 > The version of the board is the one without raid controller and mb
revision
 > 1.2
 >
 > BIOS was downloaded from shuttles site.
 >
 > I have tried removing the battery and resetting bios with jumper but with
no
 > luck.
 >
 > Any suggestions what to do?
 >
 > Greetings Stig
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: AV40 not posting after flashing BIOS 
Back to top
Login to vote
noone14

External


Since: Nov 14, 2004
Posts: 2



(Msg. 3) Posted: Wed Nov 24, 2004 7:35 am
Post subject: Re: AV40 not posting after flashing BIOS [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Hi Jonathan

No my mb is not a dual-bios system, but next time i buy mb i think i will
buy a Gigabyte board which have dual bios.

Meanwhile i have got the Shuttle board to post, it showed up to be at
combination of the flashing of the bios and the installment of a new PCI
card that caused the trouble, after removing all cards exept video it
bootede up fine.

Thanks for your suggestion!

Greetings Stig

"Jonathan" <jonathanNO.RemoveThis@SPAMsprintmail.com> wrote in message
news:PaGdnb-U6-pcVwHcRVn-tQ@speakeasy.net...
 > Is the motherboard in your system a dual-BIOS one? I don't know if
 > Shuttle
 > is doing this or not, but many manufacturers are putting out dual-BIOS
 > boards so you can switch to an alternate/backup BIOS.
 >
 > Otherwise, you should be able to do a BIOS recovery, as long as you have a
 > PS/2 keyboard and a floppy drive (on a real floppy controller, not USB).
 > Google for "award bios recovery" or something, I think you'll find it.
 >
 > good luck,
 > Jonathan
 >
 > "Stig Holmberg" <noone.RemoveThis@nowhwere.com> wrote in message
 > news:aLIld.64891$Vf.3217943@news000.worldonline.dk...
  >> I have flashed BIOS on my AV40 board, from version av40S025.bin to
  >> av40S030.bin and now the board won´t boot at all, just a whirring sound
 > when
  >> the mb fans starts and stops.
  >>
  >> The version of the board is the one without raid controller and mb
 > revision
  >> 1.2
  >>
  >> BIOS was downloaded from shuttles site.
  >>
  >> I have tried removing the battery and resetting bios with jumper but with
 > no
  >> luck.
  >>
  >> Any suggestions what to do?
  >>
  >> Greetings Stig
  >>
  >>
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AV40 not posting after flashing BIOS 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
SN41G2 hard-drive lamp flashing - i noticed that on my new SN41G2 the hard drive lamp si constantly flashing (once per second) first i thought that it was the OS constantly accessing the drive (WinXP SP1), and indeed it is not flashing when in BIOS, onlyu when XP is loaded already. But..

Bios 019 - Does this have the high pitched whine problem?

MN31N Bios - I just got a MN31N and man is this BIOS confusing. I have it running with default setting for now but I want to learn more about the settings before I begin tweaking them. For instance, WTF is FSB Spread Spectrum and which is better .5 or 1.0? Can someon...

bios flash - I have a SK41G, it has worked fine uptill couple of days ago then a blue screen kept coming up on trying to boot telling me that bios needs to be updated. Have been on Shuttle home page but have tried to make sense of there instructions but can not get i...

FB 61 G2 BIOS update - Any out there, who did already a BIOS update for the Shuttle FB61 G2? If yes was it successful, or did you see any problems? I'm asking because I had problens with the new 38th version... (on two Shuttles) regards Olaf www.ok-edv.de
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]