Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Abit AW8-Max - Latest BIOS Flash then RAID 0 Problem

 
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  256meg 6600GT?  
Author Message
Dave

External


Since: Aug 07, 2005
Posts: 1



(Msg. 1) Posted: Sun Aug 07, 2005 9:30 am
Post subject: Abit AW8-Max - Latest BIOS Flash then RAID 0 Problem
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

Got a new Abit MB and 830 Dual Core CPU. Two Toshiba 160 GB drives.

Succeeded in getting the Intel Raid Control setup in the Bios (it wasn't
obvious) and successfully installed Windows XP in RAID 0 configuration
(2x160 = 320 MB boot drive in RAID 0)...



Out of the box the Abit bios did not recognize the cpu properly - it thought
it was a Celeron D..



Latest BIOS from Abit fixes that problem. Flashed the BIOS, now,, even
though the BIOS is configured to enable the Intel Raid controller, I never
get the press "Control + I" prompt to get into the Intel Bios Raid Setup..



Tried unplugging the power cable, and resetting the BIOS multiple times -
this seems to be very "iffy" with these Abit MB's...had to wait overnite
with the original bios in order to get the Intel Raid Bios prompt to come
up.



Any ideas (other than waiting for another release of the bios)??? :

 >> Stay informed about: Abit AW8-Max - Latest BIOS Flash then RAID 0 Problem 
Back to top
Login to vote
stink

External


Since: Aug 20, 2005
Posts: 2



(Msg. 2) Posted: Sat Aug 20, 2005 3:55 pm
Post subject: Re: Abit AW8-Max - Latest BIOS Flash then RAID 0 Problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

the same happens on my av8 with latest bios.
try to disable legacy support for the usb-ports.
this helps for me.

walter



"Dave" <jj RemoveThis @aol.com> schrieb im Newsbeitrag
news:11fcdpne7q8bm3d@corp.supernews.com...
> Got a new Abit MB and 830 Dual Core CPU. Two Toshiba 160 GB drives.
>
> Succeeded in getting the Intel Raid Control setup in the Bios (it wasn't
> obvious) and successfully installed Windows XP in RAID 0 configuration
> (2x160 = 320 MB boot drive in RAID 0)...
>
>
>
> Out of the box the Abit bios did not recognize the cpu properly - it
> thought it was a Celeron D..
>
>
>
> Latest BIOS from Abit fixes that problem. Flashed the BIOS, now,, even
> though the BIOS is configured to enable the Intel Raid controller, I never
> get the press "Control + I" prompt to get into the Intel Bios Raid Setup..
>
>
>
> Tried unplugging the power cable, and resetting the BIOS multiple times -
> this seems to be very "iffy" with these Abit MB's...had to wait overnite
> with the original bios in order to get the Intel Raid Bios prompt to come
> up.
>
>
>
> Any ideas (other than waiting for another release of the bios)??? :
>
>

 >> Stay informed about: Abit AW8-Max - Latest BIOS Flash then RAID 0 Problem 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
KT7A with latest bios flash, harddrives over 200G (linux) - I am thinking of installing a 250G hd on my KT7A, I don't do windows so that isn't a limitation... I just want to be sure that the bios will see the entire hd as is. If not, whats an adapter that works well (ie no kernel recompiles needed with a 2.4.x..

BIOS Update Flash Problem - Folks, I'm hoping that someone has an explanation for what happened to me. I have an ABIT KV7 mobo with an 3000+XP processor. Original BIOS load was 12, I believe. I was having some freeze up problems, so I wanted to see if there was a BIOS update....

Where to get latest IC7 bios? - Flashmenu keeps saying the v2.0 bios is not available on both the FTP servers it shows so where else can I get it?

Getting latest bios - Hello, On one abit usa webpage, it says the latest BIOS ID is aj. On another it says the latest bios id is YH. From the newsgroup, it appears as though both of these are old. What is the latest BIOS ID? And if I don't have the latest BIOS, which of the..

IC7-G (Rev 1) Temp rise with latest bios - My computer has been going along swimmingly (Oclocked P4 2.4 running at 3.0) since I got it ... seems like ages ago. Upgraded the bios to the latest iteration and my temperatures have gone up significantly (cannot blame the weather here controlled..
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]