Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

AX4C Max II BIOS rev 1.08 flashing error

  
   Hardware Problem Solving Community! (Home) -> AOPEN RSS
Next:  MK79G-1394 Power Management  
Author Message
John S. Washburn

External


Since: Nov 30, 2003
Posts: 8



(Msg. 1) Posted: Sun Nov 30, 2003 5:39 am
Post subject: AX4C Max II BIOS rev 1.08 flashing error
Archived from groups: alt>comp>periphs>mainboard>aopen (more info?)
A new BIOS revision was just released a few days ago for the AX4C Max II
board. However, I'm having problems trying to flash my BIOS with it. When I
try and flash it in Windows XP, I get a pop-up error message during the
flashing progress. And when I try to flash it over and over, it would fail
at random percentage points along the way.

At this point, I had a feeling I was screwed if I rebooted. So, without much
else to lose, I rebooted. Only this time, the PC wouldn't even POST (duh, I
wonder why *sigh*). So, I switched the jumper on the board to the backup
BIOS ROM chip. From here, I was able to log back into WinXP, download the
DOS utility to flash it back to revision 1.03.

So now I'm back up and running as if I never even attempted this horrid
process of flashing in Windows. I've always been afraid to flash a BIOS in
Windows, and now my fears are confirmed. No more, never again. I want a DOS
version of 1.08.

Anyone else experience a similar issue with this board or any other AOpen
board that allows you to flash the BIOS using their Windows utility?

 >> Stay informed about: AX4C Max II BIOS rev 1.08 flashing error 
Back to top
Login to vote
Wesley1

External


Since: Nov 05, 2003
Posts: 14



(Msg. 2) Posted: Sun Nov 30, 2003 6:30 am
Post subject: Re: AX4C Max II BIOS rev 1.08 flashing error [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
true i always afraid to flash a BIOS too. one time i screw my geforce video
card went horrible wrong with bios update, this card is utter damaged Sad

 >> Stay informed about: AX4C Max II BIOS rev 1.08 flashing error 
Back to top
Login to vote
FishStick1

External


Since: Nov 30, 2003
Posts: 1



(Msg. 3) Posted: Sun Nov 30, 2003 7:53 am
Post subject: Re: AX4C Max II BIOS rev 1.08 flashing error [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 >No more, never again. I want a DOS
 >version of 1.08.

Should be easy to do... Copy the 1.08 .BIN file to a floppy with the DOS-based
Award flash utility.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX4C Max II BIOS rev 1.08 flashing error 
Back to top
Login to vote
John S. Washburn

External


Since: Nov 30, 2003
Posts: 8



(Msg. 4) Posted: Sun Nov 30, 2003 8:39 am
Post subject: Re: AX4C Max II BIOS rev 1.08 flashing error [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I've tried using a generic Award flash utility, but it just locks up when I
direct it to the BIN file.

I've also tried taking the AOpen DOS based utility for revision 1.03 and
renaming the file from CM2103.EXE to CM2108.EXE. Then, include the
CM2108.BIN file along with CM2108.EXE to a boot floppy. However, when I try
and run it, I would get an error saying "MB not supported" or something to
that effect. Which leads me to believe that 1: the 1.08 BIN file is correct.
Or 2: the DOS flash utility is coded to it's included BIN file for each BIOS
revision AOpen releases.



"FishStick" <chumsicle RemoveThis @aol.comSpamBait> wrote in message
news:20031129235302.05279.00000816@mb-m21.aol.com...
  > >No more, never again. I want a DOS
  > >version of 1.08.
 >
 > Should be easy to do... Copy the 1.08 .BIN file to a floppy with the
DOS-based
 > Award flash utility.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX4C Max II BIOS rev 1.08 flashing error 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
AX4C Max - BIOS & RAID Controllers - Hello I recently purchased a new Aopen AX4C Max mainboard for a upgrade to my previous system. I had in my previous system a Promise Fasttrak TX2 RAID PCI controller with 4 Western Digital 80GB JB series hard drives in RAID 0+1 array. So I have..

AX4C Max onboard Lan - Sometimes it happens that the network just shuts down on the AX4C Max with onboard lan (broadcom gigabit). When I reboot everything works just fine again. Anyone else with this issue? Latest drivers are installed for the Broadcom network adapter System i...

AX4C MAX 2 motherboard problems - Has anyone got the "vivid BIOS "skin utility or the " silenttek 2 "thingy to work withe the AX4C Max 2 board? I just bought mine , and none of those apps seem to be " up to date ". The "silent tek" thing shuts down...

AOpen AX4C Max: unstable - blue screen / lan unreliable - A week ago, I switched from an Intel D850EMVRL (i850/RDRAM) to an AOpen AX4C Max motherboard. I reinstalled Windows XP (format). My other hardware stayed the same as before (Adaptec 2400A and Audigy2). Since the switch to the AOpen AX4C, I suffer some..

Ak77-8xn "Inaccessible boot device" after flashing - Hello aopen users! I have a Aopen Ak77-8xn board. I used to run bios r1.13 and updated to the recently released r1.15. After rebboting the windows 2000 boot process starts and gives me a "inaccessible boot device" error and refuses to go furt...
   Hardware Problem Solving Community! (Home) -> AOPEN All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]