Re AX6BC / Win98 / USB weirdness

FAQ

Profile

Re AX6BC / Win98 / USB weirdness

Hardware Problem Solving Community! (Home) -> AOPEN

Next: Matshita UJDA710 drive no longer burns?

Author

Message

jojax14

External

Since: Jan 04, 2005
Posts: 2

(Msg. 1) Posted: Wed Jan 05, 2005 8:08 am Post subject: Re AX6BC / Win98 / USB weirdness Archived from groups: alt>comp>periphs>mainboard>aopen (more info?)

>What BIOS is your motherboard using? I would load version 2.57 or later >if you already haven't. Some of the BIOS fixes have been USB related. >Post I was on 2.55, but I just upgraded to 2.59. No change unfortunately. I checked in the device manager and the printer appears there even when it is inaccessible. I would think it was a printer problem except that I have also had the exact same problem with my scanner (which was resolved by moving it to the other USB port. Jojax14<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Re AX6BC / Win98 / USB weirdness

Display posts from previous:

Related Topics:

AX6BC / Win98 / USB weirdness - Hi all, I have an old system with an AX6BC motherboard, running Windows98. I have just upgraded my printer, so I have gone from a parallel port model to a USB model. The printer installed fine, but then the PC could not find it until the next power-on...

AX6BC - ATA/66 - Hi, Does anyone know how to enable ATA/66 on the AX6BC? I've got an ATA/66 hard drive, and an ATA/66 cable, but the computer shows the drive is running in UDMA/33 mode still. Anyone have any ideas?

AX6BC squealing - I bought a used AX6BC motherboard and it's making a high-pitched noise. The noise seems to be coming from behind the CPU or possibly right in front of it. It happens whether I have a Celeron 500 or a 600 overclocked to 900 in it. The noise is differen...

AX6BC CPU Upgrade - Hey, I have an AX6BC motherboard, and am trying to find out if I can upgrade the CPU. I have a Celeron 766 FC-PGA CPU here that I'd like to use. If I get a Slot 1 to Socket 370 converter, will that allow me to use the Celeron 766 on the AX6BC? The..

Adding RAM to AX6BC - Hi, I have a system with an AOpen AX6BC motherboard presently fitted with 128 MB of PC100 SDRAM as a single DIMM. I want to increase the amount of RAM and can only get 256 MB DIMMs of PC133 SDRAM. Can the two types (PC100 and PC133) be mixed of should ...

	Hardware Problem Solving Community! (Home) -> AOPEN	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum