|
Related Topics:
| ieee1394b fully functional in PCs ? - Or actually it runs at (400) ?
CMS Backup Rescue CD? - I'm having issues with a 160GB SATA CMS Automatic Backup System we just The idea is to send this unit with a Dell D630 laptop to a remote sales person so they can backup their laptop. The software itself is very slick: just connect the..
Drive Image rescue - I have no floppy drive, which is normally the vehicle for Drive Image 5.0x rescue diskettes (in case C:/ or XP dies). Is there a way to invoke the DOS RESTORE windows by using the D.I. bootable CD? could the two rescue floppies be copied..
LaCie fingerprint drive - how rescue? - Got a LaCIE SAFE USB 80gb biometric drive and after doing the to unlock routine' it suddenly now won't display any data (so it shows as e.g. 'dreve E:' in Explorer but '0mb'.) This model does not actually encrypt the data - so..
Drive Image 2002 Rescue Boot disks under XP? - I'm preparing for the of a new hard drive on my WIN XP SP1A (NTFS) system. I am planning on using Drive Image 2002 to do a clone of my existing boot drive (and to the brand new drive, so I though I'd..
|
|
| Author |
Message |
External
Since: Oct 14, 2004
Posts: 7
|
(Msg. 1) Posted: Thu Jan 31, 2008 9:53 pm
Post subject: Acronis Version 8/11 Rescue Cd fails to fully load
Archived from groups: alt>comp>periphs>mainboard>asus, others (more info?)
|
|
|
I borrowed a friend's version11 Acronis home Rescue CD and like my
version 8, it
wont load. I tried using the F11 commands like acpi=off noapic. I was
able to see the logs before i got the black screen of death. Lots of
lost interrupt erros and dma time outs. Failed to discover some devices
but all HDD were identified.
I am using an Asus ACPI board with a 2.8 GHZ. Rescue CD worked on my
Dell notebook.
Any suggestions? |
|
| Back to top |
|
 | |
External
Since: Nov 07, 2003
Posts: 1692
|
(Msg. 2) Posted: Thu Jan 31, 2008 11:46 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In comp.sys.ibm.pc.hardware.storage Sam <nospam.DeleteThis@nospam.com> wrote:
> I borrowed a friend's version11 Acronis home Rescue CD and like my
> version 8, it
> wont load. I tried using the F11 commands like acpi=off noapic.
I deduce that this is a Linux-based system. Correct?
> I was
> able to see the logs before i got the black screen of death. Lots of
> lost interrupt erros and dma time outs. Failed to discover some devices
> but all HDD were identified.
Hmm.
> I am using an Asus ACPI board with a 2.8 GHZ. Rescue CD worked on my
> Dell notebook.
> Any suggestions?
For comparison, you could get a current Knoppix CD and try whether
it boots. If it does not, there is likely something seriously
wrong with your hardware.
Arno |
|
| Back to top |
|
| |
External
Since: Feb 01, 2006
Posts: 1570
|
(Msg. 3) Posted: Fri Feb 01, 2008 11:11 am
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Sam <nospam DeleteThis @nospam.com> wrote:
> I borrowed a friend's version11 Acronis home Rescue CD and like my
> version 8, it
> wont load. I tried using the F11 commands like acpi=off noapic. I
> was able to see the logs before i got the black screen of death.
> Lots of lost interrupt erros and dma time outs. Failed to discover
> some devices but all HDD were identified.
>
> I am using an Asus ACPI board with a 2.8 GHZ. Rescue CD worked on my
> Dell notebook.
>
> Any suggestions?
Try a later build of TI. >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Nov 19, 2004
Posts: 15
|
(Msg. 4) Posted: Fri Feb 01, 2008 11:11 am
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
>> Sam <nospam DeleteThis @nospam.com> wrote:
>>> I borrowed a friend's version11 Acronis home Rescue CD and like my
>>> version 8, it
>>> wont load. I tried using the F11 commands like acpi=off noapic. I
>>> was able to see the logs before i got the black screen of death.
>>> Lots of lost interrupt erros and dma time outs. Failed to discover
>>> some devices but all HDD were identified.
>>>
>>> I am using an Asus ACPI board with a 2.8 GHZ. Rescue CD worked on
>>> my Dell notebook.
>>>
>>> Any suggestions?
"Rod Speed" <rod.speed.aaa DeleteThis @gmail.com> wrote in message
>>> Try a later build of TI.
I tried using the TI version 11.
I figured out the problem though. Have no freaken idea why and I don't
like the solution either.
I disconnected all my USB hubs and peripherals including keyboard. My
mouse is still PS2. I tried again. And presto, it worked. I have no
flipping idea why. I repeated this several times with and without USB
and sure enough, with USB connections Acronis won't work.
BTW, I managed to borrow a version 11 Rescue CD and the same results
were experienced.
Also, I had tonnes of hda interrupts errors and dma time outs while in
"diagnostic mode" when Acronis failed to load.
Do you think I am suppose to do something to my motherboard to fix
this problem? Perhaps there's a command that I'm not familiar with?
I would hate to think in my next system where I would have USB
everything I wouldnt be able to use Acronis at all. >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Feb 01, 2006
Posts: 1570
|
(Msg. 5) Posted: Fri Feb 01, 2008 2:03 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Sam <none.DeleteThis@none.com> wrote:
> Rod Speed <rod.speed.aaa.DeleteThis@gmail.com> wrote
>> Sam <nospam.DeleteThis@nospam.com> wrote
>>> I borrowed a friend's version11 Acronis home Rescue CD and like
>>> my version 8, it wont load. I tried using the F11 commands like
>>> acpi=off noapic. I was able to see the logs before i got the black
>>> screen of death. Lots of lost interrupt erros and dma time outs.
>>> Failed to discover some devices but all HDD were identified.
>>> I am using an Asus ACPI board with a 2.8 GHZ.
>>> Rescue CD worked on my Dell notebook.
>>> Any suggestions?
>> Try a later build of TI.
> I tried using the TI version 11.
I meant a later build of 11.
> I figured out the problem though. Have no freaken
> idea why and I don't like the solution either.
A later build of 11 may well fix the problem.
> I disconnected all my USB hubs and peripherals including keyboard.
> My mouse is still PS2. I tried again. And presto, it worked. I have no
> flipping idea why. I repeated this several times with and without USB
> and sure enough, with USB connections Acronis won't work.
The rescue CD runs on Linux, and for some reason it isnt handling the USB devices properly.
> BTW, I managed to borrow a version 11 Rescue CD
> and the same results were experienced.
Like Arno said, you should try some of the linux live CDs like Knoppix and Ubuntu.
Likely there is something about the USB on that system they wont like either.
> Also, I had tonnes of hda interrupts errors and dma time
> outs while in "diagnostic mode" when Acronis failed to load.
> Do you think I am suppose to do something to my motherboard to fix this problem?
Its possible, depending on whether the Linux live CDs load successfully or not.
> Perhaps there's a command that I'm not familiar with?
Yes, since its running on Linux, thats certainly possible.
> I would hate to think in my next system where I would have
> USB everything I wouldnt be able to use Acronis at all.
That isnt the case, it runs fine on my systems that have everything on USB and you wont find
everyone in the support forums howling about not being able to use it on systems with just USB.
http://www.wilderssecurity.com/forumdisplay.php?f=65 >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Nov 19, 2004
Posts: 15
|
(Msg. 6) Posted: Fri Feb 01, 2008 2:03 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Rod Speed wrote:
>>> I would hate to think in my next system where I would have
>>> USB everything I wouldnt be able to use Acronis at all.
>>
>> That isnt the case, it runs fine on my systems that have everything
>> on USB and you wont find everyone in the support forums howling
>> about not being able to use it on systems with just USB.
>> http://www.wilderssecurity.com/forumdisplay.php?f=65
I disconnected the USB hub (it's from my monitor) and removed everything
else from my tower and just plugged in my USB keyboard and PS2 mouse.
TI Rescue does boot and loads the Rescue CD.
I guess it's possible my Asus chipset is just flaky with Acronis.
BTW, I don't see Arno's post. :-/ >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Nov 20, 2007
Posts: 2
|
(Msg. 7) Posted: Fri Feb 01, 2008 3:29 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: alt>comp>periphs>mainboard>asus, others (more info?)
|
|
|
On Jan 31, 11:51 pm, "Sam" <n... DeleteThis @none.com> wrote:
> I disconnected the USB hub (it's from my monitor) and removed everything
> else from my tower and just plugged in my USB keyboard and PS2 mouse.
> TI Rescue does boot and loads the Rescue CD.
From your earlier description, I immediately suspected the USB hub.
IOW, the devices
themselves might be working properly but if the chipset in the hub is
"wonky" then it
might be the cause of your problem.
Simple test: plug the hub into a different computer, perhaps even one
running M$
and note the behaviour you observe.
Sudsy >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Feb 01, 2008
Posts: 1
|
(Msg. 8) Posted: Fri Feb 01, 2008 4:59 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: alt>comp>periphs>mainboard>asus, others (more info?)
|
|
|
Hi,
Have you tried to install the safemedia plugin before burning the boot CD ?
If yes, please boot using this mode.
Best regards
Sid
"Sam" <nospam.RemoveThis@nospam.com> a écrit dans le message de
news:erroj.32688$ow.17136@pd7urf1no...
>I borrowed a friend's version11 Acronis home Rescue CD and like my
> version 8, it
> wont load. I tried using the F11 commands like acpi=off noapic. I was
> able to see the logs before i got the black screen of death. Lots of
> lost interrupt erros and dma time outs. Failed to discover some devices
> but all HDD were identified.
>
> I am using an Asus ACPI board with a 2.8 GHZ. Rescue CD worked on my
> Dell notebook.
>
> Any suggestions?
>
>
> >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Feb 01, 2006
Posts: 1570
|
(Msg. 9) Posted: Fri Feb 01, 2008 7:53 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Sam <none.RemoveThis@none.com> wrote
> Rod Speed wrote
>>>> I would hate to think in my next system where I would have
>>>> USB everything I wouldnt be able to use Acronis at all.
>>> That isnt the case, it runs fine on my systems that have everything
>>> on USB and you wont find everyone in the support forums howling
>>> about not being able to use it on systems with just USB.
>>> http://www.wilderssecurity.com/forumdisplay.php?f=65
> I disconnected the USB hub (it's from my monitor) and removed
> everything else from my tower and just plugged in my USB keyboard
> and PS2 mouse. TI Rescue does boot and loads the Rescue CD.
> I guess it's possible my Asus chipset is just flaky with Acronis.
Nope, I use Asus motherboards myself and they work fine with TI.
> BTW, I don't see Arno's post. :-/
He just suggested you try the Knoppix live CD and see if your system will boot that successfully. >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Nov 10, 2003
Posts: 1690
|
(Msg. 10) Posted: Fri Feb 01, 2008 11:24 pm
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Sam wrote in news:Lzxoj.30653$4w.20214@pd7urf2no
> Rod Speed wrote:
> > > > I would hate to think in my next system where I would have
> > > > USB everything I wouldnt be able to use Acronis at all.
> > >
> > > That isnt the case, it runs fine on my systems that have everything
> > > on USB and you wont find everyone in the support forums howling
> > > about not being able to use it on systems with just USB.
> > > http://www.wilderssecurity.com/forumdisplay.php?f=65
>
> I disconnected the USB hub (it's from my monitor) and removed everything
> else from my tower and just plugged in my USB keyboard and PS2 mouse.
> TI Rescue does boot and loads the Rescue CD.
>
> I guess it's possible my Asus chipset is just flaky with Acronis.
> BTW, I don't see Arno's post. :-/
Some news servers now filter sporgers. >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Jan 23, 2007
Posts: 1
|
(Msg. 11) Posted: Sat Feb 02, 2008 8:19 am
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In message <Lzxoj.30653$4w.20214@pd7urf2no>, Sam <none.RemoveThis@none.com> writes
>Rod Speed wrote:
>>>> I would hate to think in my next system where I would have
>>>> USB everything I wouldnt be able to use Acronis at all.
>>>
>>> That isnt the case, it runs fine on my systems that have everything
>>> on USB and you wont find everyone in the support forums howling
>>> about not being able to use it on systems with just USB.
>>> http://www.wilderssecurity.com/forumdisplay.php?f=65
>
>I disconnected the USB hub (it's from my monitor) and removed everything
>else from my tower and just plugged in my USB keyboard and PS2 mouse.
>TI Rescue does boot and loads the Rescue CD.
>
>I guess it's possible my Asus chipset is just flaky with Acronis.
>
>BTW, I don't see Arno's post. :-/
>
>
I had a similar problem which came down to 2 different USB hubs causing
my system to hang on boot. Its all OK when I don't use either of the
hubs. I manage without them. Also using TI v11.
--
bertieboy
One hydrogen atom to another: I've lost an electron. Are you sure? Yes, I'm
positive. >> Stay informed about: Acronis Version 8/11 Rescue Cd fails to fully load |
|
| Back to top |
|
| |
External
Since: Feb 05, 2008
Posts: 2
|
(Msg. 12) Posted: Tue Feb 05, 2008 7:40 am
Post subject: Re: Acronis Version 8/11 Rescue Cd fails to fully load [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
