Epox Beep Codes

hi,

ive installed an Epox 4BDA with a 400mhz p4 and 2x256mb ddr ram. i
have an agp graphics card in it.

when i turn the machine on the fans power up etc, but i get a
completely blank screen and a stange beep code.

it starts off with a very long beep, but before the second long beep
finishes, a higher pitched and faster set of beeps begin to soun out
over the top of the continuous long beeps.

is this a number of problems to cause a more complex beep code?

thanks for your help,

duncan

http://www.bioscentral.com/beepcodes/awardbeep.htm

DaveL


<dunctait RemoveThis @hotmail.com> wrote in message
news:1157053136.502716.206150@i3g2000cwc.googlegroups.com...
> hi,
>
> ive installed an Epox 4BDA with a 400mhz p4 and 2x256mb ddr ram. i
> have an agp graphics card in it.
>
> when i turn the machine on the fans power up etc, but i get a
> completely blank screen and a stange beep code.
>
> it starts off with a very long beep, but before the second long beep
> finishes, a higher pitched and faster set of beeps begin to soun out
> over the top of the continuous long beeps.
>
> is this a number of problems to cause a more complex beep code?
>
> thanks for your help,
>
> duncan
>