Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

CD drive can't burn correctly, SOYO MB

  
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Next:  k7v dragon plus upgrade from XP1800 to XP2400  
Author Message
Leonardo Pignataro

External


Since: Jul 12, 2003
Posts: 2



(Msg. 1) Posted: Sat Jul 12, 2003 9:03 pm
Post subject: CD drive can't burn correctly, SOYO MB
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)
Hello.

My problem is that my CD drive is somehow incompatible with my system
hardware, whose motherboard is a SOYO. The drive is a HL-DT-ST RW/DVD
GCC-4480B, from LG, and the M/B is a SY-6VBA133. The drive reads
everything fine, but can't burn CDs correcly. I'm convinced the
problem is with the hardware, but not with the drive itself, since it
works on other computers.

I've tryed changing the IDE cables, the power cables, making the drive
master and slave, I've also upgraded the firmware to 1.02. Nothing
worked. I downloaded a hardware analyser from the SOYO site
(HWDoctor), and it seems the voltage of both my Vcore and VTT are
lower than they should (I don't even know what those are). The Vcore
is working at 1.71V and the VTT at 1.5V. Could that be a problem, and
could that be related to my CD-burning problem?

Please, help me! Here follows my system info and a detailed
explanation of the problem:

---------------------------------------------------

M/B: SOYO SY-6VBA133
BIOS revision: 6VBA133_2BAB (latest on SOYO's webpage)
CPU: Pentium III 700 Mhz
RAM: 384 MB DIMM
HDD: Fujitsu 20 GB

---------------------------------------------------

I recently bought a LG combo CD drive - HL-DT-ST RW/DVD GCC-4480B. It
reads DVDs, CD-Rs and CD-RWs just fine. However, it cannot burn CD-Rs
correctly. I've tryed burning in different scenarios:

1. Windows 98 SE + Easy CD Creator 5.0
2. Windows XP Pro + Nero Express

Always in low burning speeds, buffer always up to 90%. The same thing
occurs: the burning seems to go on fine, but the data verification
fails. During the verfication, Nero says that it "cannot mount CD",
and EZCD just hangs there forever checking the data. So, the CDs
aren't burned correcly, can't even be read by any CD drives.

The trouble is not with the drive, since it works just fine on another
computer where I tested it. I even changed it on the store where I
bought it, but the same problem happens. The trouble doesn't seem to
be with the software either, since I tryed it in different scenarios.

So, it seems the problem is that the drive is somehow uncompatible
with my system's hardware.

---------------------------------------------------

Thank you very much for your time & help.

-- Leonardo Pignataro - Secret_Doom --

secret_doom.DeleteThis@hotmail.com
www.batch.hpg.com.br

 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
PlaySaver

External


Since: Jul 13, 2003
Posts: 4



(Msg. 2) Posted: Sun Jul 13, 2003 6:14 am
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 >Hello.
 >
 >My problem is that my CD drive is somehow incompatible with my system

Try turning off Auto insert notification.
It can cause all sorts of problems when it is left on while burning a disc.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
Leonardo Pignataro

External


Since: Jul 12, 2003
Posts: 2



(Msg. 3) Posted: Sun Jul 13, 2003 2:37 pm
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanks for the suggestion, PlaySaver, but it did not work.

-- Leonardo Pignataro - Secret_Doom --

secret_doom.DeleteThis@hotmail.com
<a style='text-decoration: underline;' href="http://www.batch.hpg.com.br" target="_blank">www.batch.hpg.com.br</a>

playsaver.DeleteThis@aol.comborg (PlaySaver) wrote in message news:<20030712231421.25812.00000284.DeleteThis@mb-m17.aol.com>...
  > >Hello.
  > >
  > >My problem is that my CD drive is somehow incompatible with my system
 >
 > Try turning off Auto insert notification.
 > It can cause all sorts of problems when it is left on while burning a disc.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
CyberCFO

External


Since: Jul 02, 2003
Posts: 18



(Msg. 4) Posted: Sun Jul 13, 2003 9:44 pm
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Sat, 12 Jul 2003 18:03:06 -0700, Leonardo Pignataro wrote:

 > (HWDoctor), and it seems the voltage of both my Vcore and VTT are
 > lower than they should (I don't even know what those are). The Vcore
 > is working at 1.71V and the VTT at 1.5V. Could that be a problem, and
 > could that be related to my CD-burning problem?

It's a power supply problem and not the motherboard then.
--
/g

"Outside of a dog, a man's best friend is a book, inside
a dog it's too dark to read" -Groucho Marx<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
SleeperMan1

External


Since: Jun 30, 2003
Posts: 21



(Msg. 5) Posted: Sun Jul 13, 2003 9:58 pm
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
<secret_doom RemoveThis @hotmail.com> wrote:
 > Hello.
 >
 > My problem is that my CD drive is somehow incompatible with my system
 > hardware, whose motherboard is a SOYO. The drive is a HL-DT-ST RW/DVD
 > GCC-4480B, from LG, and the M/B is a SY-6VBA133. The drive reads
 > everything fine, but can't burn CDs correcly. I'm convinced the
 > problem is with the hardware, but not with the drive itself, since it
 > works on other computers.
 >
 > I've tryed changing the IDE cables, the power cables, making the drive
 > master and slave, I've also upgraded the firmware to 1.02. Nothing
 > worked. I downloaded a hardware analyser from the SOYO site
 > (HWDoctor), and it seems the voltage of both my Vcore and VTT are
 > lower than they should (I don't even know what those are). The Vcore
 > is working at 1.71V and the VTT at 1.5V. Could that be a problem, and
 > could that be related to my CD-burning problem?
 >
 > Please, help me! Here follows my system info and a detailed
 > explanation of the problem:

Maybe something worth to check it out: i've had 256M of RAM quite a while
and all was OK. Then i bought another stick of 256M and put it in and all
worked well, just my CDRW didn't burn correct. I mean burn was a success,
but when i checked out burn(In NERO setting check ou tdata after burn), i've
got data is not the same. When i removed second RAM ,all was OK again. I
ended by replacing two of 256 and get one 512M RAM. However, by mobo is
Dragon + but still...
So, try to remove one stick and try.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
Sheldon Roger1

External


Since: Jul 14, 2003
Posts: 1



(Msg. 6) Posted: Mon Jul 14, 2003 6:16 pm
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
secret_doom DeleteThis @hotmail.com (Leonardo Pignataro) wrote in message news:<a52f43af.0307121703.69eccf0 DeleteThis @posting.google.com>...
 > Hello.
 >
 > My problem is that my CD drive is somehow incompatible with my system
 > hardware, whose motherboard is a SOYO. The drive is a HL-DT-ST RW/DVD
 > GCC-4480B, from LG, and the M/B is a SY-6VBA133. The drive reads
 > everything fine, but can't burn CDs correcly. I'm convinced the
 > problem is with the hardware, but not with the drive itself, since it
 > works on other computers.
 >
 > I've tryed changing the IDE cables, the power cables, making the drive
 > master and slave, I've also upgraded the firmware to 1.02. Nothing
 > worked. I downloaded a hardware analyser from the SOYO site
 > (HWDoctor), and it seems the voltage of both my Vcore and VTT are
 > lower than they should (I don't even know what those are). The Vcore
 > is working at 1.71V and the VTT at 1.5V. Could that be a problem, and
 > could that be related to my CD-burning problem?
 >
 > Please, help me! Here follows my system info and a detailed
 > explanation of the problem:
 >
 > ---------------------------------------------------
 >
 > M/B: SOYO SY-6VBA133
 > BIOS revision: 6VBA133_2BAB (latest on SOYO's webpage)
 > CPU: Pentium III 700 Mhz
 > RAM: 384 MB DIMM
 > HDD: Fujitsu 20 GB
 >
 > ---------------------------------------------------
 >
 > I recently bought a LG combo CD drive - HL-DT-ST RW/DVD GCC-4480B. It
 > reads DVDs, CD-Rs and CD-RWs just fine. However, it cannot burn CD-Rs
 > correctly. I've tryed burning in different scenarios:
 >
 > 1. Windows 98 SE + Easy CD Creator 5.0
 > 2. Windows XP Pro + Nero Express
 >
 > Always in low burning speeds, buffer always up to 90%. The same thing
 > occurs: the burning seems to go on fine, but the data verification
 > fails. During the verfication, Nero says that it "cannot mount CD",
 > and EZCD just hangs there forever checking the data. So, the CDs
 > aren't burned correcly, can't even be read by any CD drives.
 >
 > The trouble is not with the drive, since it works just fine on another
 > computer where I tested it. I even changed it on the store where I
 > bought it, but the same problem happens. The trouble doesn't seem to
 > be with the software either, since I tryed it in different scenarios.
 >
 > So, it seems the problem is that the drive is somehow uncompatible
 > with my system's hardware.
 >
 > ---------------------------------------------------
 >
 > Thank you very much for your time & help.
 >
 > -- Leonardo Pignataro - Secret_Doom --
 >
 > secret_doom DeleteThis @hotmail.com
<font color=purple> > <a style='text-decoration: underline;' href="http://www.batch.hpg.com.br</font" target="_blank">www.batch.hpg.com.br</font</a>>

My burner, not a DVD RW with NERO won't work well with the IDE
controller using DMA. It works fine with PIO mode. Worth a try.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
dave25

External


Since: Sep 17, 2004
Posts: 81



(Msg. 7) Posted: Wed Jul 16, 2003 9:41 pm
Post subject: Re: CD drive can't burn correctly, SOYO MB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
S_ROGER.RemoveThis@prodigy.net (Sheldon Roger) wrote in message news:<6525cd3e.0307141416.445a79fc.RemoveThis@posting.google.com>...
 > secret_doom.RemoveThis@hotmail.com (Leonardo Pignataro) wrote in message news:<a52f43af.0307121703.69eccf0.RemoveThis@posting.google.com>...
  > > Hello.
  > >
  > > My problem is that my CD drive is somehow incompatible with my system
  > > hardware, whose motherboard is a SOYO. The drive is a HL-DT-ST RW/DVD
  > > GCC-4480B, from LG, and the M/B is a SY-6VBA133. The drive reads
  > > everything fine, but can't burn CDs correcly. I'm convinced the
  > > problem is with the hardware, but not with the drive itself, since it
  > > works on other computers.
  > >
  > > I've tryed changing the IDE cables, the power cables, making the drive
  > > master and slave, I've also upgraded the firmware to 1.02. Nothing
  > > worked. I downloaded a hardware analyser from the SOYO site
  > > (HWDoctor), and it seems the voltage of both my Vcore and VTT are
  > > lower than they should (I don't even know what those are). The Vcore
  > > is working at 1.71V and the VTT at 1.5V. Could that be a problem, and
  > > could that be related to my CD-burning problem?
  > >
  > > Please, help me! Here follows my system info and a detailed
  > > explanation of the problem:
  > >
  > > ---------------------------------------------------
  > >
  > > M/B: SOYO SY-6VBA133
  > > BIOS revision: 6VBA133_2BAB (latest on SOYO's webpage)
  > > CPU: Pentium III 700 Mhz
  > > RAM: 384 MB DIMM
  > > HDD: Fujitsu 20 GB
  > >
  > > ---------------------------------------------------
  > >
  > > I recently bought a LG combo CD drive - HL-DT-ST RW/DVD GCC-4480B. It
  > > reads DVDs, CD-Rs and CD-RWs just fine. However, it cannot burn CD-Rs
  > > correctly. I've tryed burning in different scenarios:
  > >
  > > 1. Windows 98 SE + Easy CD Creator 5.0
  > > 2. Windows XP Pro + Nero Express
  > >
  > > Always in low burning speeds, buffer always up to 90%. The same thing
  > > occurs: the burning seems to go on fine, but the data verification
  > > fails. During the verfication, Nero says that it "cannot mount CD",
  > > and EZCD just hangs there forever checking the data. So, the CDs
  > > aren't burned correcly, can't even be read by any CD drives.
  > >
  > > The trouble is not with the drive, since it works just fine on another
  > > computer where I tested it. I even changed it on the store where I
  > > bought it, but the same problem happens. The trouble doesn't seem to
  > > be with the software either, since I tryed it in different scenarios.
  > >
  > > So, it seems the problem is that the drive is somehow uncompatible
  > > with my system's hardware.
  > >
  > > ---------------------------------------------------
  > >
  > > Thank you very much for your time & help.
  > >
  > > -- Leonardo Pignataro - Secret_Doom --
  > >
  > > secret_doom.RemoveThis@hotmail.com
<font color=green>  > > <a style='text-decoration: underline;' href="http://www.batch.hpg.com.br</font" target="_blank">www.batch.hpg.com.br</font</a>>
 >
 > My burner, not a DVD RW with NERO won't work well with the IDE
 > controller using DMA. It works fine with PIO mode. Worth a try.

Good luck, Does your hardware meet the minimum requirements for the
burner. This could be an issue with software and ram depending on the
OS being used.
Dave<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CD drive can't burn correctly, SOYO MB 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
PC2100 w/ 333 MHz Barton and Soyo KT600 Ultra PE - I'm building a system using: Soyo SY-KT600 Ultra Platinum Edition Motherboard Athlon XP 2500+ Barton PC2100 sticks of several sizes and makes The CPU's FSB rating is 333 MHz. Does that mean I can also run it at 266 MHz so as to synchronize it with the...

RedHat 8.0 install on Soyo Dragon + problems - I'm trying to install RedHat 8.0 on a Soyo Dragon+ system as a dual boot machine with XP. XP is installed on the Primar Master IDE and Linux will be installed on the Primary Slave disl. The installation keeps failing telling me that the install disk is....

Soyo SY-KT400 Dragon Ultra Board - Anyone have any experience with this board? I am thinking of purchasing this and would like to know what you think of the board. I would be using two PC2100 DDR 266 256MB sticks in it with an AMD XP 2400+ CPU. TIA, -Tom

At wit's end with amixer of ALSA 0.9.4 on CMI8738 (Soyo KT.. - I am trying to get my onboard sound hardware (CMI8738) to work under Linux From Scratch 4.1/Beyond Linux From Scratch 1.0 with ALSA 0.9.4 installed under kernel 2.4.21. I have actually succeeded in getting it to play sounds, but cannot figure out how to...

Maximum supported hard disk drive size - According to http://www.soyo.com.tw/kb/kbdesc.php?id=27 the maximum supported hard disk drive size on Soyo 5EHM motherboard is about 80 GB. What is the exact value of this limitation? What is this number based on? I ask this because 80 GB seems a quit...
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]