Case missing LED cables.

I recently purchased the SY-P4I875P. It looks fairly simple to
install. However, I have a slight problem. In the motherboard
manual, it shows where to plug in the 2-pin ACPI LED cable. However,
my case does not have such a cable. My case has the cables for Power
LED, Reset Button, Speaker, HDD LED, and Power Button, but there is no
cable corresponding to ACPI LED. Do I need to get a new case?

This is the first mobo I have bought based on the Pentium 4. All my
previous systems have been Athlon based.

No you do not need another case, just skip that connector.

Jim
"Anthony J. Bertorelli" <shadowman2001.TakeThisOut@ocsnet.net> wrote in message
news:21319274.0307022137.206f1e50@posting.google.com...
 > I recently purchased the SY-P4I875P. It looks fairly simple to
 > install. However, I have a slight problem. In the motherboard
 > manual, it shows where to plug in the 2-pin ACPI LED cable. However,
 > my case does not have such a cable. My case has the cables for Power
 > LED, Reset Button, Speaker, HDD LED, and Power Button, but there is no
 > cable corresponding to ACPI LED. Do I need to get a new case?
 >
 > This is the first mobo I have bought based on the Pentium 4. All my
 > previous systems have been Athlon based.<!-- ~MESSAGE_AFTER~ -->