Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Computer will not boot, only beep three times at me.

 
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Next:  Can I boot from SATA Raid card?  
Author Message
blues02

External


Since: Apr 25, 2004
Posts: 1



(Msg. 1) Posted: Sun Apr 25, 2004 8:49 pm
Post subject: Computer will not boot, only beep three times at me.
Archived from groups: alt>comp>periphs>mainboard>soyo, others (more info?)

When the computer is booted it will only make three beeps, followed by a
short pause, then three more beeps. It will just do this over and over. No
video or anything else will happen. I've tried reinstalling the CPU and
using a different power fan but that doesn't appear to do anything. I've
cleared the BIOS several times and that has had no effect. I first
installed the CPU with the heatsink and fan that was on it. It's a pretty
wide heatsink and barely fits on the MB. I put it on and booted it,
nothing. I noticed the CPU fan didn't turn on. Then I tried putting a
different heatsink that I used to have on a Duron 1.1Ghz, and it booted. I
got into the bios and did some stuff then rebooted it and I noticed it was
running a little hot. So I put the old heatsink on it and restarted it
again. Now I just get the three beep pattern. I'm at a loss. Is the CPU
damaged? The motherboard? What could be the problem? The big heatsink is
butting up against stuff on the MB and that worries me. Could it be
shorting it out? I put the smaller heatsink back on it to try that and it
didn't help.

System setup:
Soyo SY-K7VME Mainboard
AMD Athlon 1700+ CPU
256 MB PC2100 DDR
GeForce2 MX AGP card.
The Sound and LAN are on the MB.

Thanks for any help.

Aaron.

 >> Stay informed about: Computer will not boot, only beep three times at me. 
Back to top
Login to vote
sagan

External


Since: Jun 17, 2004
Posts: 4



(Msg. 2) Posted: Thu May 13, 2004 9:24 pm
Post subject: Re: Computer will not boot, only beep three times at me. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Go here:
<a style='text-decoration: underline;' href="http://www.bioscentral.com/beepcodes/amibeep.htm" target="_blank">http://www.bioscentral.com/beepcodes/amibeep.htm</a>

(assuming its an AMI Bios; If it's an Award, you can find that also on the
same site).

Looks like bad memory, (try reseating B4 replacing).

HTH
\\m//




<blues02 RemoveThis @sbcglobal.net> wrote in message
news:pSSic.1430$eS5.426@newssvr24.news.prodigy.com...
 > When the computer is booted it will only make three beeps, followed by a
 > short pause, then three more beeps. It will just do this over and over.
No
 > video or anything else will happen. I've tried reinstalling the CPU and
 > using a different power fan but that doesn't appear to do anything. I've
 > cleared the BIOS several times and that has had no effect. I first
 > installed the CPU with the heatsink and fan that was on it. It's a pretty
 > wide heatsink and barely fits on the MB. I put it on and booted it,
 > nothing. I noticed the CPU fan didn't turn on. Then I tried putting a
 > different heatsink that I used to have on a Duron 1.1Ghz, and it booted.
I
 > got into the bios and did some stuff then rebooted it and I noticed it was
 > running a little hot. So I put the old heatsink on it and restarted it
 > again. Now I just get the three beep pattern. I'm at a loss. Is the CPU
 > damaged? The motherboard? What could be the problem? The big heatsink
is
 > butting up against stuff on the MB and that worries me. Could it be
 > shorting it out? I put the smaller heatsink back on it to try that and it
 > didn't help.
 >
 > System setup:
 > Soyo SY-K7VME Mainboard
 > AMD Athlon 1700+ CPU
 > 256 MB PC2100 DDR
 > GeForce2 MX AGP card.
 > The Sound and LAN are on the MB.
 >
 > Thanks for any help.
 >
 > Aaron.
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Computer will not boot, only beep three times at me. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
PC2100 w/ 333 MHz Barton and Soyo KT600 Ultra PE - I'm building a system using: Soyo SY-KT600 Ultra Platinum Edition Motherboard Athlon XP 2500+ Barton PC2100 sticks of several sizes and makes The CPU's FSB rating is 333 MHz. Does that mean I can also run it at 266 MHz so as to synchronize it with the...

Setting up motherboard on tray - Hi: Please don't laugh, but I'm installing a mainboard onto a chassis for the very first time, and I have a really simple hardware question. Does the mainboard (Soyo KT600 Dragon Ultra Platinum) simply sit on the mainboard tray? Is it supposed to be..

5EH5 not working... most times - I had a PC with a Soyo 5EH5 v1.3 motherboard. At some point the OS started hanging all the time. Re-installation also hanged at some point, so I thought it was a hardware problem. I replaced everything on that PC (including the AMD K6-2 processor), but..

Beep Plz Help - I have a P4 My problem is that when i boot the pc it gives a beep sound for 2-3 seconds I have removed the memory and replug same problem I have VGA card on board Plz help

SY-P4VTE Beep Beep Beep - I fnially got the computer to post and I received three beep codes. There was a One Beep, followed by 3 beeps, then followed by 8 beeps. What is wrong with my setup? I have a Celeron 2.93 ggz Some sort of PCI Video Card (Not Sure it's not mine) 256 me...
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]