Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Connect wired LAN to existing Wireless network

  
   Hardware Problem Solving Community! (Home) -> PC Networking RSS
Next:  internal wireless card  
Author Message
Vladimir

External


Since: May 07, 2004
Posts: 1



(Msg. 1) Posted: Fri May 07, 2004 3:24 pm
Post subject: Connect wired LAN to existing Wireless network
Archived from groups: comp>sys>ibm>pc>hardware>networking (more info?)
Hello,

I need an advice on how to enable a desktop PC to access my existing
wireless network (and internet) via LAN card, connected to one of
network PCs?

I have 2 computers on wireles and one connected by wire to one of
them.

Bridging doesn't work, alredy tried.

Thanks

Vladimir Radomirovic

 >> Stay informed about: Connect wired LAN to existing Wireless network 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Wireless and Wired Network Sharing with Internet can this .. - I have 3 computers and a Playstation 2 on a wireless network. Here's the setup. One Cable Modem hooked up to a Linksys Wireless-G Broadband Router WRT54G. Computer One: downstairs has a Netgear FA310TX Network card hooked up to the Linksys Wireless-G..

Strange behaviour wired network in combination with Wirele.. - A challenge for the experts..... I have a wired network in my home. All wires are connected through a router/switch. Some of the wiring is connected directly (my pc's downstairs) and some of the wiring is connected through outlets (a wire goed from the....

Adding a wireless Access Point to an existing LAN (NAT) - Adding a wireless Access Point to an existing LAN (NAT) I want to add a WAP (Wireless Access Point) to an existing, good functioning LAN, existing out of an Winroute NAT server, switch + connected client-PC's. The WAP has router/DHCP, switch an...

Adding a wireless Access Point to an existing LAN (NAT) - Adding a wireless Access Point to an existing LAN (NAT) I want to add a WAP (Wireless Access Point) to an existing, good functioning LAN, existing out of an Winroute NAT server, switch + connected client-PC's. The WAP has router/DHCP, switch an...

Linking Wired and Wireless Networks - Hi, Just curious as to whether this can be done. Here goes: I have a wired network with an SMB four port router and a Linksys 802.11b WAP in one room of my house. My main Internet connection is a broadband connection. I use W2k Advanced server running....
   Hardware Problem Solving Community! (Home) -> PC Networking All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]