Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Epox EP-8KHA+ (rev. 2.0)

 
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  RAM problem on 8kha+  
Author Message
Mario Koto

External


Since: Aug 03, 2003
Posts: 1



(Msg. 1) Posted: Sun Aug 03, 2003 6:49 pm
Post subject: Epox EP-8KHA+ (rev. 2.0)
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)

I have destroyed my Mainboard Epox EP-8KHA+ (rev. 2.0) and i need your help.
I would be pleased if have the condenser C139 and the re-stand R375 judges what kind of would tell me somebody.
The two elements lie right above on the right between an IC and condenser of 1000 uF.

THX

 >> Stay informed about: Epox EP-8KHA+ (rev. 2.0) 
Back to top
Login to vote
Michael Walsh

External


Since: Aug 06, 2003
Posts: 1



(Msg. 2) Posted: Wed Aug 06, 2003 4:37 am
Post subject: Re: Epox EP-8KHA+ (rev. 2.0) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

It may still be under warranty. It took about three weeks, but some company
in California fixed it and sent it back to me. Check EPoX's web site for
details.

--
Mike Walsh

"Mario Koto" <koto RemoveThis @gmx.li> wrote in message
news:EaaXa.82748$2j1.1122044@news.chello.at...
 > I have destroyed my Mainboard Epox EP-8KHA+ (rev. 2.0) and i need your
help.
 > I would be pleased if have the condenser C139 and the re-stand R375 judges
what kind of would tell me somebody.
 > The two elements lie right above on the right between an IC and condenser
of 1000 uF.
 >
 > THX
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Epox EP-8KHA+ (rev. 2.0) 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
166 FSB on 8KHA+ German Epox sites says 2800+ is possible - Hi, Has anybody here tried a 166 FSB CPU on the 8KHA+? The german Epox website has the 2800+ at 166 (333) FSB listed as the maximum for that mobo. But the dutch site has an older list stating 1600+ is the maximum. I contacted the dutch Epox support..

overclock tips for Epox 8KHA+ ? - I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if I can get some overclocking tips. Basically, how. =) The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM. Web searching and searching has lead me to reviews of the..

Epox 8KHA+ and Radeon 9500 = does not boot - Hi, I have a 8KHA+ and bought a Club3D Radeon 9500 non pro (old Layout - 8 layers). Without additional power connector, the system boots and the correct error message show up. When i connect the card to the power supply, the system does not boot up at..

ATI sapphire 9500, softmod, epox 8kha+, win98se - The Softmod files I've seen seem to be for Winxp, though there is some mention of a Rivatuner option, but I can't find a link to anything rivatuner that is not nVidia. Anyone got this softmod thinghy to work with this OS/MB? p.s. if you don't know what..

Epox 8kha+ and Sapphire ati 9500 installation problems - Anyone have this setup and can help? I replaced a gf2Ti 64Mb. This is what I did. 1. removed all obvious detonator drivers 2. installed std vga drivers 3. put in new card 4. did installation from cd that came with the card (no problems). 5. booted ok. 6....
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]