Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Eizo S2110W and FX5600

  
   Hardware Problem Solving Community! (Home) -> General RSS
Next:  Attn: Shepİ re:Powermax  
Author Message
John D

External


Since: Nov 15, 2005
Posts: 2



(Msg. 1) Posted: Tue Nov 15, 2005 6:55 pm
Post subject: Eizo S2110W and FX5600
Archived from groups: comp>sys>ibm>pc>hardware>video (more info?)
I cannot get the DVI input to feed from this card to the monitor,
Analogue is okay.

Any other experience or advice with this?

 >> Stay informed about: Eizo S2110W and FX5600 
Back to top
Login to vote
John D

External


Since: Nov 15, 2005
Posts: 2



(Msg. 2) Posted: Tue Nov 15, 2005 6:55 pm
Post subject: Re: Eizo S2110W and FX5600 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Tue, 15 Nov 2005 22:58:35 +0000, John D <jd.DeleteThis@karma.fsnet.co.uk>
wrote:

>I cannot get the DVI input to feed from this Asus V9650 card to the monitor,
>Analogue is okay.
>
>Any other experience or advice with this?

 >> Stay informed about: Eizo S2110W and FX5600 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
CRT: Eizo F931 vs. IBM P260 - Hi all, I'll probably have to replace my good old CRT (Sony 20se-v, 1994) because its color temperature became flaky. I was considering a LCD but don't like the fixed resolution in a 5:4 aspect ratio at displays of this size, and so I'm rather..

Eizo t965 vs. t966 - any difference in general 2d and 3d q.. - Hi! I'm going to upgrade my 19' monitor to a 21' Eizo (..fineally! :), and I've noticed two models in the same pricerange. T966 is obvisouly the newest model, but the t965 is still available in Norway, and is considerably cheaper. I've read that the t96...

Dabsvalue fx5600 ultra...Why so cheap? - I've been looking for a new graphic card below 150£ and found this one (http://www.dabs.com/products/prod-info.asp?quicklinx=2HZL). Everything seems right (even the clock speed is 400 MHz, so it's the new chip not the old one which was 350) but the price...

2D performance ATI compared to Matrox - Hi, I recently upgraded my monitor to an iiyama 22 inch Diamnondtron (HM204DT, Vision Master Pro 514). I'm really satisfied about it. The only thing that bothers me is a fuzzy image at high resolutions at high refresh rates (currently 1600 x 1200 @ 8...

quality of DVI to VGA convertor - Hello, I would like to buy a DVI to VGA (D-SUB 15 pins) convertor for the connection between my videocard and monitor. The videocard has only got a DVI output, and the monitor has only got a VGA input. I wondered if there is much difference in qualit...
   Hardware Problem Solving Community! (Home) -> General All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]