Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Eizo t965 vs. t966 - any difference in general 2d and 3d q..

 
   Hardware Problem Solving Community! (Home) -> General RSS
Next:  Leadtek tv2000 XP installation issue  
Author Message
smikkel

External


Since: Jun 26, 2003
Posts: 1



(Msg. 1) Posted: Thu Jun 26, 2003 6:29 am
Post subject: Eizo t965 vs. t966 - any difference in general 2d and 3d quality?
Archived from groups: comp>sys>ibm>pc>hardware>video (more info?)

Hi!

I'm going to upgrade my 19' monitor to a 21' Eizo (..fineally! Smile, and
I've noticed two models in the same pricerange. T966 is obvisouly the
newest model, but the t965 is still available in Norway, and is
considerably cheaper.
I've read that the t966 supports advanced features for true-color in
picture and video editing. This is something I don't need. I'm only
conserned with general picture/color sharpness and contrast, that is
2D sharpness when working in explorer (not blurred small letters) and
general 3D image quality in pc-games. Is there any difference between
these models in these areas (eg. better in lower/higher resolutions)?
Is it the same internal hardware, ie. FD Triniton?
I've searched all over the internet, but cannot find any comparison or
info about this. I've gone through several eizo websites (the
comparisons page doesn't work properly) to no avail.
I would greatly appreciate any help of info anyone might give me.
Thanks!

 >> Stay informed about: Eizo t965 vs. t966 - any difference in general 2d and 3d q.. 
Back to top
Login to vote
calypso

External


Since: Jul 07, 2003
Posts: 26



(Msg. 2) Posted: Fri Jul 18, 2003 11:18 pm
Post subject: Re: Eizo t965 vs. t966 - any difference in general 2d and 3d quality? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

smikkel <smikkel.RemoveThis@online.no> kenjka:
 > I'm going to upgrade my 19' monitor to a 21' Eizo (..fineally! Smile, and
 > I've noticed two models in the same pricerange. T966 is obvisouly the
 > newest model, but the t965 is still available in Norway, and is
 > considerably cheaper.

Any EIZO you choose would be fine... So, if money's no the problem - choose
T966... If it _IS_ the problem, go with T965... Both use SONY FD Trinitron
tube...

I've suggested this monitor to two people... One from Croatia, and one from
Norway... Both were pretty satisfied with it...

Be sure that you use high-quality 2D/3D graphics card if you want nice
picture... IF 2D is crucial, go with Matrox or ATI... If not, go with
anything you like... Wink


And, one more thing... Don't expect that it will fullfill all of your
wishes... It's 21", and it's damn big, and many monitors have got problems
with geometry like a lot of other big monitors!! I've been watching on some
IBM P260 models, and Mitsubishi 2070SB, convergence is the main problem, but
it doesn't bother me, since I know that it's a damn big monitor, and the way
electrons fly from electron gun to mask is way longer than on 17" monitors!
But, again, EIZO is the king when professional monitors are the case...
Barco is better, but only for professional usage, you can't get them... Smile


--
Pod krevetom se ponekad tufnjicast Ruso tuce. By runf

Damir Lukic, calypso.RemoveThis@fly.srk.fer.hr
a member of hr.comp.hardver FAQ-team<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Eizo t965 vs. t966 - any difference in general 2d and 3d q.. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
2D performance ATI compared to Matrox - Hi, I recently upgraded my monitor to an iiyama 22 inch Diamnondtron (HM204DT, Vision Master Pro 514). I'm really satisfied about it. The only thing that bothers me is a fuzzy image at high resolutions at high refresh rates (currently 1600 x 1200 @ 8...

quality of DVI to VGA convertor - Hello, I would like to buy a DVI to VGA (D-SUB 15 pins) convertor for the connection between my videocard and monitor. The videocard has only got a DVI output, and the monitor has only got a VGA input. I wondered if there is much difference in qualit...

FA: Mag 17" Monitor min/boxed - Starts at $39.99 - no reserve! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4130934049&category=3695&sspagename=STRK%3AMESSE%3AIT&rd=1 -- Please remove the 'NOSPAM' txt from my E-mail address to reply.

Is this a good buy? BFG GeForce FX 5900 for $175 including.. - I've been asking back and forth about video cards... I see online there are lots of vendors selling the BFG GeForce FX 5900 card for around $175 including shipping. Is that not a very good price? I've been considering the ATI RADEON 9600. Between the....

GByte GV-R92S128T double device entry question - Hi loaded the giga driver for the above and notoce in device manager that it appears twice in device manager [XP Home] as RADEON 9200 Series and RADEON 9200 Series secondary any ideas why?? tnx relloman
   Hardware Problem Solving Community! (Home) -> General All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]