|
Related Topics:
| Hang when entering Dual BIOS / QFLASH - Hello, I just bought a Gigabyte Pro and received a revision 2.0 board. Upon seemed to work fine, but I can NOT get into the Dual BIOS utility or QFLASH. I can press DEL key to enter BIOS, but when I press the F8 key..
Gigabyte GA-8KNXP won't enter post - I have a Gigabyte GA-8KNXP (Rev 1) board that after 2 years stopped booting up. It will not even enter POST. It has always been on a APC, battery backup. The only thing I've done recently was back in December I upgraded to a P4 3.2 Ghz CPU..
Gigabyte 81955X Royal Won't POST - Hi all, I just bought a Gigabyte 81955X Royal to replace an ancient 440BX based system that finally gave up the ghost. As such, I have a bunch of brand new parts that I have no real way to test in another system. I have tried to assemble the
Gigabyte 8IK1100 Rev 2. - No POST beep or graphics. - Hello, I have a 8IK1100 Rev 2 with a 3.0 GHZ HT P4 that has died. The power supply is good, but when I power on, my graphics card does not init and there are no POST beeps. The LED near the memory sockets is on. I've removed all cards but the video..
Gigabyte GA-5AA - I recently purchased an old Gigabyte GA-5AA to use with an amd k62 300 cpu. The board came with a pentiumn 166 and booted fine. To my surprise however when i put the amd chip in and set up the correct jumpers and switches it wouldnt boot. I..
|
|
|
Next: C.I.A. 2
|
| Author |
Message |
External
Since: Nov 21, 2007
Posts: 1
|
(Msg. 1) Posted: Wed Nov 21, 2007 12:41 am
Post subject: Entering qflash from POST without permission on gigabyte mainboard
Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)
|
|
|
|
|
| Back to top |
|
 | |
|
FAQ
Search
Profile
Private Messages
Log in
