Firewire daughter card will not fit....!

FAQ

Profile

Firewire daughter card will not fit....!

Hardware Problem Solving Community! (Home) -> Gigabyte

Next: GA-6VTXE-A and Celeron 1.3

Author

Message

lisa1

External

Since: Nov 02, 2003
Posts: 2

(Msg. 1) Posted: Sun Nov 02, 2003 2:48 pm Post subject: Firewire daughter card will not fit....! Archived from groups: alt>comp>periphs>mainboard>giga-byte (more info?)

I have a Gigabyte GA-8SQ800 motherboard which I have had for about 6 months with no problems, I have just gone to fit the Firewire 3 port daughter card, But my AGP graphics card takes up the PCI slot, Where the daughter card needs to go.... Is there such a thing as a cable that I could use to connect the firewire card, To the motherboard (it is 12 pins by 2 pins), Then I can put the firewire card in an empty slot, Is this possible? lisa >> Stay informed about: Firewire daughter card will not fit....!

Display posts from previous:

Related Topics:

Gigabyte 8KNXP Firewire Problems - Anyone know if the front connector on the 8KNXP is supposed to be usable as network connection or is it just the 2 on the back that is supposed to work for that?

8KNXP Front Panel Firewire Problems - Anyone know if the Chieftec BX series frontpanel firewire connection is supposed to work with the 8KNXP? I cant get it to work, the 2 in the back works just fine, but the one in front just wount work. Anyone got any ideas? Thanks

which graphics card - Hi I have a Ga-7VTXH mob (ver 1.0 I think) currently running an AIW 9000 pro video card, If I upgrade this what cards can I go upto? I had heard there was power probs with this board and some cards. Thanks

GA-6VXE7+ board compatible with radeon 9200se video card ? - Hi, I was wondering if anyone could tell me if the gigabyte radeon 9200se 64MB DDR (AGP 8x) video card is compatible with GA-6VXE7+ motherboard (REV 3.0) running at P3 933MHz with 320 SDRAM Memory. Thanks in advance

Gigabyte 7N400 Pro2 Problem Gigaraid ITE Raid Western Digi.. - Just wondering if anyone has had this problem or knows a solution. I have 2 Western Digital 180 GB 8 MB Cache IDE hard drives that I am trying to get to work with the ite raid controller on my motherboard (gigabyte 7n400 PRo2). When I connect them and....

	Hardware Problem Solving Community! (Home) -> Gigabyte	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum