GA-8STXC - High CPU load during drive access (cd-burning),..

FAQ

Profile

GA-8STXC - High CPU load during drive access (cd-burning),..

Hardware Problem Solving Community! (Home) -> Gigabyte

Next: A7V400-MX boot and onboard audio problems

Author

Message

invalid6

External

Since: Jan 12, 2005
Posts: 1

(Msg. 1) Posted: Wed Jan 12, 2005 12:35 pm Post subject: GA-8STXC - High CPU load during drive access (cd-burning), UDMA is active Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)

Hello, I have got a high CPU load during drive operations like cd-burning. UDMA is active on both ide channels and the cables seems to be correct. It?s an modified OEM board, provided by Fujitsu Siemens Computers. Any ideas? Christian -- Was mach ich hier bloß? >> Stay informed about: GA-8STXC - High CPU load during drive access (cd-burning),..

Display posts from previous:

Related Topics:

ICH5 chip keeps burning - Hi, I recently bought Gigabyte MB GA-8IPE1000 Pro-G, installed my old parts on it (VGA, HDD and Modem) and bought Intel P4 3GHZ 1MB cache and Dual channel RAM 400 and a new Floppy drive. When I started the PC everything went fine but after 4 minutes I..

HELP, 50% cpu load when just moving mouse ??!! - HELP, 50% cpu load when just moving mouse ??!! Help, After hardware upgrade and fresh Win98-SE install, moving the mouse causes permanent 50% CPU utilisation !!?? Everthing else is slow as well. I stripped down the system to bare essentials but problem...

HELP, 50% cpu load when just moving mouse ??!! - Help, After hardware upgrade and fresh Win98-SE install, moving the mouse causes permanent 50% CPU utilisation !!?? Everthing else is slow as well. I stripped down the system to bare essentials but problem remains. Cpu : Athlon XP 2400+ M/B : GA 7DXR...

Processor load ITE Raid / 8KNXP - Hello, Using the 8KNXP with P4/3.06 800FSB and 2 x 356Mb Corsair TwinX LL / WinXP Prof. Furthermore, I've got a pair of WD's 80GB setup as RAID 1 on the ITE Raid controller (Both as master on IDE 3 and IDE4) . In addition there is a seperate WD 40GB set....

8knxp Bios access problems - I am trying to get to the bios screen to change the settings there however when I press del on setup... when your supposed to, my system hangs with a flashing cursor in the top left of the screen. I have tryed several different bios versions, currently...

	Hardware Problem Solving Community! (Home) -> Gigabyte	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum