 |
|
|
|
Next: My Mag XJ810 is dying
|
| Author |
Message |
External
Since: Aug 18, 2003
Posts: 4
|
(Msg. 1) Posted: Tue Nov 16, 2004 12:23 pm
Post subject: HDD LED responds to CD-ROM, not hard disk
Archived from groups: comp>sys>ibm>pc>hardware>cd-rom, others (more info?)
|
|
|
I have:
- MSI 875P Neo-FIS2R motherboard
- Seagate Serial ATA hard disk
- Sony DRU-500A internal DVD/CD drive
The HDD activity LED responds to the CD-ROM instead of the hard disk!
I have connected it according to the motherboard manual (JFP1 pins 1
and 3). Can anyone help?
Thanks in advance,
Steve |
|
| Back to top |
|
 | |
External
Since: Aug 18, 2004
Posts: 222
|
(Msg. 2) Posted: Tue Nov 16, 2004 12:25 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
saw this once where the boot sequence determined the LED's source,
can't remember the brand.
"Steve Kobes" <stevenkobes DeleteThis @hotmail.com> wrote in message
news:50d1fce8.0411161223.3cc217b8@posting.google.com...
> I have:
> - MSI 875P Neo-FIS2R motherboard
> - Seagate Serial ATA hard disk
> - Sony DRU-500A internal DVD/CD drive
>
> The HDD activity LED responds to the CD-ROM instead of the hard
disk!
> I have connected it according to the motherboard manual (JFP1 pins 1
> and 3). Can anyone help?
>
> Thanks in advance,
> Steve<!-- ~MESSAGE_AFTER~ --> |
|
| Back to top |
|
| |
External
Since: Oct 03, 2004
Posts: 17
|
(Msg. 3) Posted: Tue Nov 16, 2004 3:59 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In article <50d1fce8.0411161223.3cc217b8.RemoveThis@posting.google.com>,
Steve Kobes <stevenkobes.RemoveThis@hotmail.com> wrote:
>I have:
> - MSI 875P Neo-FIS2R motherboard
> - Seagate Serial ATA hard disk
> - Sony DRU-500A internal DVD/CD drive
>
>The HDD activity LED responds to the CD-ROM instead of the hard disk!
>I have connected it according to the motherboard manual (JFP1 pins 1
>and 3). Can anyone help?
Just a WAG, but try swapping the pin 1 & 3 connections.
--
Rich Greenberg N6LRT Marietta, GA, USA richgr atsign panix.com + 1 770 321 6507
Eastern time zone. I speak for myself & my dogs only. VM'er since CP-67
Canines:Val, Red & Shasta (RIP),Red, husky Owner:Chinook-L
Atlanta Siberian Husky Rescue. <a style='text-decoration: underline;' href="http://www.panix.com/~richgr/" target="_blank">www.panix.com/~richgr/</a> Asst Owner:Sibernet-L<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Jan 09, 2004
Posts: 895
|
(Msg. 4) Posted: Tue Nov 16, 2004 4:05 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Steve Kobes wrote:
> I have:
> - MSI 875P Neo-FIS2R motherboard
> - Seagate Serial ATA hard disk
> - Sony DRU-500A internal DVD/CD drive
>
> The HDD activity LED responds to the CD-ROM instead of the hard disk!
> I have connected it according to the motherboard manual (JFP1 pins 1
> and 3). Can anyone help?
Most likely the LED is tied to the PATA host adapter, not the SATA.
>
> Thanks in advance,
> Steve
--
--John
Reply to jclarke at ae tee tee global dot net
(was jclarke at eye bee em dot net)<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Nov 19, 2003
Posts: 210
|
(Msg. 5) Posted: Tue Nov 16, 2004 9:43 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Rich Greenberg" <richgr.TakeThisOut@panix.com> wrote in message
news:cndpob$glu$1@panix5.panix.com...
> In article <50d1fce8.0411161223.3cc217b8.TakeThisOut@posting.google.com>,
> Steve Kobes <stevenkobes.TakeThisOut@hotmail.com> wrote:
> >I have:
> > - MSI 875P Neo-FIS2R motherboard
> > - Seagate Serial ATA hard disk
> > - Sony DRU-500A internal DVD/CD drive
> >
> >The HDD activity LED responds to the CD-ROM instead of the hard disk!
> >I have connected it according to the motherboard manual (JFP1 pins 1
> >and 3). Can anyone help?
>
> Just a WAG, but try swapping the pin 1 & 3 connections.
>
> --
> Rich Greenberg N6LRT Marietta, GA, USA richgr atsign panix.com + 1 770 321
6507
> Eastern time zone. I speak for myself & my dogs only. VM'er since
CP-67
> Canines:Val, Red & Shasta (RIP),Red, husky
Owner:Chinook-L
> Atlanta Siberian Husky Rescue. <a style='text-decoration: underline;' href="http://www.panix.com/~richgr/" target="_blank">www.panix.com/~richgr/</a> Asst
Owner:Sibernet-L
The HDD LED ia an IDE activity light and is supposed to respond to HDs &
CDROM activity. It is NOT responding to SERIAL IDE activity, which is poor
design or a bug in BIOS. Check for BIOS upgrades.
Mike.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Apr 28, 2004
Posts: 63
|
(Msg. 6) Posted: Wed Nov 17, 2004 12:57 am
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: comp>sys>ibm>pc>hardware>cd-rom (more info?)
|
|
|
J. Clarke wrote:
> Steve Kobes wrote:
>
>> I have:
>> - MSI 875P Neo-FIS2R motherboard
>> - Seagate Serial ATA hard disk
>> - Sony DRU-500A internal DVD/CD drive
>>
>> The HDD activity LED responds to the CD-ROM instead of the hard disk!
>> I have connected it according to the motherboard manual (JFP1 pins 1
>> and 3). Can anyone help?
>
> Most likely the LED is tied to the PATA host adapter, not the SATA.
Bingo! we have a winner. it is a bug with sata!
S<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Nov 07, 2003
Posts: 1692
|
(Msg. 7) Posted: Wed Nov 17, 2004 1:15 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In comp.sys.ibm.pc.hardware.storage J. Clarke <jclarke.DeleteThis@nospam.invalid> wrote:
> Steve Kobes wrote:
>> I have:
>> - MSI 875P Neo-FIS2R motherboard
>> - Seagate Serial ATA hard disk
>> - Sony DRU-500A internal DVD/CD drive
>>
>> The HDD activity LED responds to the CD-ROM instead of the hard disk!
>> I have connected it according to the motherboard manual (JFP1 pins 1
>> and 3). Can anyone help?
> Most likely the LED is tied to the PATA host adapter, not the SATA.
Actually for PATA the disk(s)/cdrom(s) drive the LED directly, or
via some resistors/diodes if multiple IDE busses are involved.
In any case the actual same current through the LED flows to one or
more of the IDE devices.
In SATA there is no such 'LED'-line. It would have to be simulated
by the SATA controller chip on the mainboard. Guess not all of them
do that.
If the signal is present from the SATA chip (should be on
open-drain output), it can simpley be combined with the
PATA LED signal by use of a diode-'AND'-gate without
amplifier.
Arno
--
For email address: lastname AT tik DOT ee DOT ethz DOT ch
GnuPG: ID:1E25338F FP:0C30 5782 9D93 F785 E79C 0296 797F 6B50 1E25 338F
"The more corrupt the state, the more numerous the laws" - Tacitus<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Aug 18, 2003
Posts: 4
|
(Msg. 8) Posted: Fri Nov 19, 2004 11:17 am
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: comp>sys>ibm>pc>hardware>cd-rom, others (more info?)
|
|
|
Steve Kobes wrote:
> - MSI 875P Neo-FIS2R motherboard
> - Seagate Serial ATA hard disk
> - Sony DRU-500A internal DVD/CD drive
>
> The HDD activity LED responds to the CD-ROM instead of the hard disk!
> I have connected it according to the motherboard manual (JFP1 pins 1
> and 3). Can anyone help?
Thanks to everyone who replied! I have the latest BIOS (v. 2.4).
Changing the boot sequence makes no difference. With pins 1 and 3
swapped, the LED does not come on at all.
It does appear to be a defect in MSI's 875P motherboards. I also
found this thread: <a style='text-decoration: underline;' href="http://tinyurl.com/6eqdb" target="_blank">http://tinyurl.com/6eqdb</a>
So I guess I will live without a hard disk LED.
--Steve<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
External
Since: Apr 25, 2004
Posts: 17
|
(Msg. 9) Posted: Sat Nov 20, 2004 8:10 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Aug 18, 2003
Posts: 4
|
(Msg. 10) Posted: Sun Nov 21, 2004 4:10 pm
Post subject: Re: HDD LED responds to CD-ROM, not hard disk [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
pgx RemoveThis @pgrahams.com wrote:
> I had the same problem with an ABit board. ABit support said that was
> as designed. Win2K, however seems to actvate the led??
I'm running Windows XP sp2, although I don't see why the OS would make
any difference.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: HDD LED responds to CD-ROM, not hard disk |
|
| Back to top |
|
| |
| Related Topics: | After manual eject of CD or DVD, PC still shows disk loaded - I replaced a DVD drive in my Dell with a Lite-on DVD writer. Everything works great, but when I manually eject any CD or DVD, My Computer still shows it loaded. Putting another disk in tray doesn't clear the record of old contents. Only by going to my..
copy cd->hard drive->cd-r - I'm been using my plextor software to copy cd's to my hard drive then back to a cd-r but my drive is no longer working. And now I can't access the images of my cd's from my hard drive. Whats software program should I use that will create an image of a....
Unable to read CD-R disks on CD-RW *after* Win98 -> WinXP .. - Greets! <font color=purple> ; *whew*</font> Been reading for a couple of hours to little avail...here's hoping there's a solution to this problem out there. If I've cross-posted this to an improper group (I think they're all valid.....
Can't close my Toshiba CD-ROM drive? - Hello. I have a Toshiba DVD-ROM SD-M1212 drive that refuses to close with or without a CD/DVD when the computer is on. If I turn off the computer and power it on, the drive closes and stays close. I can reopen it if I want, but then it won't close...
How do you fit an 800 meg file on a cd? - I've downloaded some large files over the internet that I would like archive to a cd, but they are around 800 megs for a single file... Is there some way to edit the file or even to cut off the end to make it fit on a cd? Thanks! Ter |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
