"HELP" K75SA PRO + ATH XP 2200+ CONSTANT REBOOTS

On Mon, 7 Jul 2003 22:43:27 -0400, "Mr. Anderson"
wrote:

 >I was just building a system for my friend which consists of the following
 >

 >K7S5A (Running latest bios)
 >256MB DDR 333mhz
 >20GB quantam hard drive
 >lite on 48x24x48cdrw
 >40x cd rom
 >ATX 350 watt power supply
 >Windows XP home
 >
 >No matter what i do, when the system gets to windows it always restarts. I
 >originally had the system with a 250 watt power supply and it did the same
 >thing. I decided to upgrade and now it wont boot to windows with the FSB/RAM
 >settings at 133/133. it will only work at 100/133 which gives the system a

 >
 >I have never had such a problem with a system as i have had with this ECS
 >board. I even tried different ram and still the same thing.....
 >
 >HELP!!!

A couple of suggestions...

Go into the BIOS and turn off the LAN, onboard sound, serial and
printer ports. This will free up IRQ's - Win seems to have trouble
when there are too many new IRQs all at once, as in a new
installation. The rear USB ports will still work, the BIOS only turns
off one of the two USB controllers.

Unplug the 40X CD ROM for the initial setup - some CD ROMs don't 'plug
and play' as well on the IDE bus as CDRW drives do. Sometimes they
have trouble with master/slave settings too, preferring one or the
other.

Sometimes it's necessary to start with the minimum configuration and
add devices one at a time for the BIOS and WIN to agree on how they
should be routed.

Good Luck!
 >> Stay informed about: ""HELP"" K75SA PRO + ATH XP 2200+ CONSTANT REBOOTS 

On Mon, 7 Jul 2003 22:43:27 -0400, In this world we created "Mr.
Anderson" wrote :

 >I was just building a system for my friend which consists of the following
 >

 >K7S5A (Running latest bios)
 >256MB DDR 333mhz
 >20GB quantam hard drive
 >lite on 48x24x48cdrw
 >40x cd rom
 >ATX 350 watt power supply
 >Windows XP home
 >
 >No matter what i do, when the system gets to windows it always restarts. I
 >originally had the system with a 250 watt power supply and it did the same
 >thing. I decided to upgrade and now it wont boot to windows with the FSB/RAM
 >settings at 133/133. it will only work at 100/133 which gives the system a

 >
 >I have never had such a problem with a system as i have had with this ECS
 >board. I even tried different ram and still the same thing.....
 >
 >HELP!!!
 >

Boot to Safemode/Control Panel/System/Startup and Recovery/Settings
and disable the Automatic restart(silly option).
This should let you work in norma windows to track down the fault
which I suspect may be driver related.

HTH



--
Free Windows/PC help,
<a rel="nofollow" style='text-decoration: none;' href="http://www.geocities.com/sheppola/trouble.html" target="_blank">http://www.geocities.com/sheppola/trouble.html</a>
Free songs download,
<a rel="nofollow" style='text-decoration: none;' href="http://artists.mp3s.com/artists/17/sheppard.html" target="_blank">http://artists.mp3s.com/artists/17/sheppard.html</a>
 >> Stay informed about: ""HELP"" K75SA PRO + ATH XP 2200+ CONSTANT REBOOTS