HEX versus ASCII serial commands to control a Projector ov..

FAQ

Profile

HEX versus ASCII serial commands to control a Projector ov..

Hardware Problem Solving Community! (Home) -> PC Networking

Next: How to connect 2 home PCs ?

Author

Message

Amnon Dekel

External

Since: Aug 29, 2004
Posts: 1

(Msg. 1) Posted: Sun Aug 29, 2004 6:45 pm Post subject: HEX versus ASCII serial commands to control a Projector over RS232 Archived from groups: comp>sys>ibm>pc>hardware>networking (more info?)

I am trying to control a projector (inforcus LP770) using a serial (rs232c) cable, but with no success. The hardware is fine- i.e. cable is good (checked continuity, used crossover between TX and RX, and use the proper net settings), but I am not able to get any response fropm the projector. The badly written guide gives commands in HEX and in ASCII- my question- how do I send a HEX command using a terminal emulation program? My apologies if this has been sent to the wrong group. Amnon Dekel >> Stay informed about: HEX versus ASCII serial commands to control a Projector ov..

Display posts from previous:

Related Topics:

using remote commands through a router - can anyone help? - I have 4 pcs connected through a lynksis router and would like to be able to send remote commands to each, in particular to shutdown. I have tried several software progs but none are able to access the other pcs (file sharing is no problem so theres..

Connection to Remote Serial Devices from Windows - I've played around with a number of "serial-to-ethernet" boxes to help me support different pieces of serial equipment, but the problem is that they always end up on a network behind a firewall. Needless to say, getting the LAN adminsitrator to...

wake-on-lan after power loss ( doesn't work). - My motherboard ( supermicro x5dal-g) has wake on lan which normally works fine. However if power is removed ( ie I shutdown normally, unplug it, then plug it back in ), the machine does not wake up. Has anybody had a problem with this ( or got it to..

Can anyone Recommended a small Home network setup site - Can anyone suggest a good website with al the home network answers? I am trying to set up a home network, am not a complete newbie but networks confuse the mental processes. Any suggestions? I am running Windows 2000 Professional and one machine is setup...

Router Woes with Blueyonder - i have purchased a netgear cable/dsl web safe router gateway, model number rp614 and am having a great deal of trouble getting it running. i have read this forum with great interest. the network is set up ok locally, i.e. the router is accessible on..

	Hardware Problem Solving Community! (Home) -> PC Networking	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum