Greetings and Hello,
I have many times read and found answers among these boards, but this time I feel I need a little more direct help. I need help properly setting (clocking) the processor in my old secondary pc for peak performance and stability. Rather than the default 1g the boards bios runs it at. I am fairly good with hardware but not very knowledgable at manually configuring processors.
I know most posts request as much information as possible so here goes:
Processor Die Information
AMD Athlon
A1333AMS3c
AYHJA0126WPFW
96582440178
ой1999
Information from AMD
A Processor Core Architecture AMD Athlon Processor
1333 Model Number 1333MHz
A Package Type Ceramic
M Operating Temperature 1.75v
S Max Die Temperature 95C
3 Size of L2 Cache 256 Kbyes
C System-Bus 266 MHz
Additional Information
Processor Multiplier 10x
Max Theoretical Thermal Power 70.0w
Max Current (Icc) In Amperes 40.0A
Package Type PGA
Memory
(1) SEITEC 512M DDR-333 MHz CL2.5
(1) Unknown 256M DDR-333 MHz
Mainbaord
SOYO KT-333 Dragon Plus
Chipset Type
VIA KT333CF
Chipset Description
VIA KT333CF / 8235 chipset Supports 266/333 MHz FSB
Graphics Info
AGP slot supporting 4X AGP Adjustable voltage from 1.5v to 1.8v
Memory Type
DDR400/333 SDRAM.
Memory Description
Three DDR 2.5V DIMM sockets support up to 3GB (DDR 333/266/200, 2GB for DDR 400)
184-pin PC3200/PC2700/PC2100/PC1600 non-ECC, unbuffered DDR SDRAM memory
Memory Speed CPU/FSB Support
CPU Front side bus---DDR266---DDR333---DDR400
200MHz----------------Yes--------Yes---------No
266MHz----------------Yes--------Yes---------Yes*
333MHz----------------No---------Yes---------Yes**
400MHz----------------No---------No----------Yes
AMD Processor FSB Support
CPU Type------------------Thunderbird
Board Type----------------200MHz---266MHz
KT333 Dragon Plus!-------Yes--------Yes
Maximum AMD CPU Speed Support
Model----------------------Thunderbird
KT333 Dragon Plus!------1.4GHz
BIOS OPTIONS
CPU Frequency Mode
Manual
---Manual Options
-----Frequency 1MHz Stepping (0-255)
-----CPU to PCI Divider /3 /4 /5 /6
100
120
133
140
150
166
200
Auto
DRAM Clock
By Spd
133
166
200
CPU Ratio Select
5X-18X
5.5X-13.5X & 16.5X
CPU Voltage Select
1.850 - 1.475 in .025 increments
DDR (2.5v) Voltage Select
Default
2.6 2.7 2.8
AGP (1.5V) Voltage Select
Default
1.6 1.7 1.8
There are additional memory options available if needed. I hope I have provided enough information for you to assist me in setting these options without drowning you in too much detial, for my first post :/
Sincerely
HuserX
Soyo KT333 Dragon Plus!
AMD 1333 Mhz T-Bird
Maxtor 20g 7200RPM HDD
768M DDR Ram
Nvidia TI-4200 64M AGP
FAQ
Profile
Private Messages
Log in
)
)
)
)
)
)
)
)
)
)
