 |
|
|
|
Next: lava lamp columns don't light.
|
| Author |
Message |
External
Since: Mar 21, 2006
Posts: 18
|
(Msg. 1) Posted: Sun Apr 09, 2006 8:55 pm
Post subject: Intermittant USB on TYAN Thundar K8WE s2895
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
|
|
|
I've got one of the above motherboards with the Ultra 320 SCSI controller on
board. Quite often (most of the time) it will refuse to power up any USB device
no matter if connected to the headers or the rear panel. Other times it will
work fine.
I've tried both a USB key and a camera. Bot are fine on other PCs.
I've tried powering it off, letting it cool down, but the problem persists. The
board is only a week old.
Any thoughts?
--
Dave K MCSE.
MCSE = Minefield Consultant and Solitaire Expert.
Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@domain. Hitting reply will work
for a couple of months only. Later set it manually. |
|
| Back to top |
|
 | |
External
Since: Apr 04, 2006
Posts: 2
|
(Msg. 2) Posted: Mon Apr 10, 2006 6:34 am
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Mar 21, 2006
Posts: 18
|
(Msg. 3) Posted: Mon Apr 10, 2006 6:55 pm
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Pavlinux wrote:
> Heh... 
> Try install Linux + Any CARD with Nvidia GPU, some times system full
> bocked after #modprobe nvidia, sometimes not, also with "usb-storage"
> module.
>
Sorry, I do not understand what you mean.
I have not installed Linux. I have installed only Windoze XP for testing, but I
will install Solaris later on. But I have not attempted to install Linux at all.
--
Dave K MCSE.
MCSE = Minefield Consultant and Solitaire Expert.
Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@domain. Hitting reply will work
for a couple of months only. Later set it manually. >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
External
Since: Apr 14, 2006
Posts: 3
|
(Msg. 4) Posted: Fri Apr 14, 2006 8:55 am
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hi, sounds like it could be an inadequate PSU?
My K8WE had strange problems when I tried a 550W PSU, but has been
running fine for almost a year now since I upgraded the PSU.
Cheers, Dave
Dave (from the UK) wrote:
> I've got one of the above motherboards with the Ultra 320 SCSI
> controller on board. Quite often (most of the time) it will refuse to
> power up any USB device no matter if connected to the headers or the
> rear panel. Other times it will work fine.
>
> I've tried both a USB key and a camera. Bot are fine on other PCs.
>
> I've tried powering it off, letting it cool down, but the problem
> persists. The board is only a week old.
>
> Any thoughts? >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
External
Since: Mar 21, 2006
Posts: 18
|
(Msg. 5) Posted: Sat Apr 15, 2006 1:55 pm
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
David Edge wrote:
> Hi, sounds like it could be an inadequate PSU?
> My K8WE had strange problems when I tried a 550W PSU, but has been
> running fine for almost a year now since I upgraded the PSU.
> Cheers, Dave
This only has one Opteron processors in it, no PCI cards and not a very
high-end graphics card( nvida 6600). So I really don't belive the 550 W
Antec power supply should be limited. I did indeed check the 5 and 12
rails with a DVM and they were OK. I have not checked others I must admit.
> Dave (from the UK) wrote:
>
>> I've got one of the above motherboards with the Ultra 320 SCSI
>> controller on board. Quite often (most of the time) it will refuse to
>> power up any USB device no matter if connected to the headers or the
>> rear panel. Other times it will work fine.
>>
>> I've tried both a USB key and a camera. Bot are fine on other PCs.
>>
>> I've tried powering it off, letting it cool down, but the problem
>> persists. The board is only a week old.
>>
>> Any thoughts?
--
Dave K MCSE.
MCSE = Minefield Consultant and Solitaire Expert.
Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@domain. Hitting reply will work
for a couple of months only. Later set it manually. >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
External
Since: Apr 14, 2006
Posts: 3
|
(Msg. 6) Posted: Tue Apr 18, 2006 1:55 am
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Dave,
I don't have much in mine, but I do have 2 248 Opterons.
The 3.3V can be a problem, particularly if you have a fair bit of RAM.
Even my 600W PSU only just provides enough current for 4 x 512MB.
Tyan tech support told me this motherboard needs 24A on 12V to start-up
even in minimal configuration, but not sure if that applied to only one CPU.
Cheers, Dave
Dave (from the UK) wrote:
> David Edge wrote:
>
>> Hi, sounds like it could be an inadequate PSU?
>> My K8WE had strange problems when I tried a 550W PSU, but has been
>> running fine for almost a year now since I upgraded the PSU.
>> Cheers, Dave
>
>
> This only has one Opteron processors in it, no PCI cards and not a very
> high-end graphics card( nvida 6600). So I really don't belive the 550 W
> Antec power supply should be limited. I did indeed check the 5 and 12
> rails with a DVM and they were OK. I have not checked others I must admit.
>
>
>> Dave (from the UK) wrote:
>>
>>> I've got one of the above motherboards with the Ultra 320 SCSI
>>> controller on board. Quite often (most of the time) it will refuse to
>>> power up any USB device no matter if connected to the headers or the
>>> rear panel. Other times it will work fine.
>>>
>>> I've tried both a USB key and a camera. Bot are fine on other PCs.
>>>
>>> I've tried powering it off, letting it cool down, but the problem
>>> persists. The board is only a week old.
>>>
>>> Any thoughts?
>
>
> >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
External
Since: Mar 21, 2006
Posts: 18
|
(Msg. 7) Posted: Wed Apr 19, 2006 2:55 pm
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
David Edge wrote:
> Dave,
> I don't have much in mine, but I do have 2 248 Opterons.
> The 3.3V can be a problem, particularly if you have a fair bit of RAM.
> Even my 600W PSU only just provides enough current for 4 x 512MB.
> Tyan tech support told me this motherboard needs 24A on 12V to start-up
> even in minimal configuration, but not sure if that applied to only one
> CPU.
> Cheers, Dave
Thanks Dave.
I have returned the motherboard to the dealer, so I guess they will
check it. If the problem occurs again I'll check the 3.3V line too.
--
Dave K MCSE.
MCSE = Minefield Consultant and Solitaire Expert.
Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@domain. Hitting reply will work
for a couple of months only. Later set it manually. >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
External
Since: Apr 14, 2006
Posts: 3
|
(Msg. 8) Posted: Sat Apr 22, 2006 4:55 am
Post subject: Re: Intermittant USB on TYAN Thundar K8WE s2895 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Dave (from the UK) wrote:
> David Edge wrote:
>
>> Dave,
>> I don't have much in mine, but I do have 2 248 Opterons.
>> The 3.3V can be a problem, particularly if you have a fair bit of RAM.
>> Even my 600W PSU only just provides enough current for 4 x 512MB.
>> Tyan tech support told me this motherboard needs 24A on 12V to
>> start-up even in minimal configuration, but not sure if that applied
>> to only one CPU.
>> Cheers, Dave
>
>
> Thanks Dave.
>
> I have returned the motherboard to the dealer, so I guess they will
> check it. If the problem occurs again I'll check the 3.3V line too.
>
OK - there was a typo in my last posting - it should read 34A not 24A
Cheers, Dave >> Stay informed about: Intermittant USB on TYAN Thundar K8WE s2895 |
|
| Back to top |
|
| |
| Related Topics: | Tyan K8WE (S2895) and Cooler Master Hyper 6+ in Lian-Li 2000 - I tried to install a Cooler Master Hyper 6+ on my socket 8 Italy 270 processor on my Tyan K8WE (S2895) motherboard in a Lian-Li case and I did it incorrectly and fried the motherboard. Maximum PC says I can safely use this cooler, but I wanted additiona...
Zalman CNPS 9500 LED, K8WE (S2895) and Factory Tyan/AMD 94.. - I have seen other posts regarding using the Zalman CNPS 9500 LED with Socket 940 motherboards. My question is whether you can use the Zalman heatsink with the factory Tyan/AMD Socket 940 base? I don't want to have to take the motherboard out of the cas...
K8WE S2895...when? - anyone know when this MB is to be in supply? Thanks! ofd
S2895 K8WE - How do I know if my setup is running in NUMA mode in Windows XP Pro SP 2? Thanks! -- Scotter
BIOS 1.03 available for K8WE (S2895) - There is a new BIOS available, 1.03, for the K8WE (S2895). Enjoy! :-) Jim |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
