"Frank Howell" <fphowell DeleteThis @sbcglobal.net> wrote in message news:<zmh7c.26806$0S2.3040@newssvr29.news.prodigy.com>...
> I could be wrong, but I don't think you can do it on the serial controller.
> If you go to the Asus site and click on K8V deluxe in the "Hot products"
> section, you will find an overview "Dual Sata Raid" and see that for Serial
> raid they only state Raid 0 and 1. Under parallel it states that you can
> have Raid 0, Raid 1 and Raid 0+1 functions.
>
> Frank Howell
> "hd2000fxdl" <hd2000fxdl DeleteThis @hotmail.com> wrote in message
> news:b735b16b.0403200933.2526ffc5@posting.google.com...
> > How do I setup a raid 0+1 configuration using the ASUS k8V deluxe
> > MoBo.
> > I currently have 2 SATA Hd's (WD250JD) on the Promise controller.
> > You can treat me like a newbe because I am when it comes to Raid
> > configurations.
> > Also, yes I did read the Manual but they are not completly descriptive
> > on this setup, well not for a newbe to raid.
> >
> > Harry
Sorry for not being clear, But I will be adding 2 more WD250JB hard
drives and connect them to the Promise IDE Raid Controller. I wasn't
thinking correctly on the origional post. I think I have everything
set as far as my setup but from everything I have read I will have to
just re install everything after this changeover, too bad when I add
the 2 new drives to the system it just won't copy the information from
the old to the new.
But if anyone has done this and knows a work around that would be
great.
Harry<!-- ~MESSAGE_AFTER~ -->
>> Stay informed about: K8V Deluxe Raid 0+1 setup 
FAQ
Profile
Private Messages
Log in
