L7S7A2 win xp problem......

Three days ago i wrote this message:
 >My configuration is :
 >ECS L7S7A2
 >AMD 2000+
 >256 MB DDR PC2700
 >CREATIVE GeForce4 Ti4600 128 Mega
 >HD 80 giga SEAGATE

 >When i try to install win xp with optimal configuration the sistem
 >hang on the first install chnage screen (when the installation
request
 >if you want to install a new xp installation or replace an exists)
 >If I remove the 2 level chace in the bios , the system arrive at the
 >34 minutes screen but when i set the keyboard and the international
 >setting the system hang with a variety of error , such as 0x7a
 >kernel_data_inpage_error, bad_pool_request


 >Why ? I have install the last bios update , if anyone have the some
 >problem please give me a trick to resolve it. The MS resource Kit
 >can't help me anymore...

First of all , thanks for everyone have response to my old msg , i
made memory test on my board , i check my hd drive and all device are
good.

I think the system is instable , because if i decrease the velocy to
100/100 mhz the system hang on 34 minutes xp installation .

Anyone have a trick to ask to me for resolve my problem.....

Can anyone tell my the right and secure configuration for run my pc
without hang installation... Please Help me.....<!-- ~MESSAGE_AFTER~ -->

"Giuseppe" schreef in bericht

 > Three days ago i wrote this message:
  > >My configuration is :
  > >ECS L7S7A2
  > >AMD 2000+
  > >256 MB DDR PC2700
  > >CREATIVE GeForce4 Ti4600 128 Mega
  > >HD 80 giga SEAGATE
 >
  > >When i try to install win xp with optimal configuration the sistem
  > >hang on the first install chnage screen (when the installation
 > request
  > >if you want to install a new xp installation or replace an exists)
  > >If I remove the 2 level chace in the bios , the system arrive at the
  > >34 minutes screen but when i set the keyboard and the international
  > >setting the system hang with a variety of error , such as 0x7a
  > >kernel_data_inpage_error, bad_pool_request
 >
 >
*I had thesame error on a MSI 745 during installation of XP, according to
microsoft that error is caused by bad ram or a bad memoryslot, i knew the
memorystick i used was ok,,so i put it in another memoryslot,,and
poof,,everything went fine from then,,sure worth a try.
good luck

Sus<!-- ~MESSAGE_AFTER~ -->