Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Matshita UJDA710 drive no longer burns?

  
   Hardware Problem Solving Community! (Home) -> CDRom RSS
Next:  Matshita UJDA710 no longer burns?  
Author Message
DesignGuy

External


Since: Feb 15, 2004
Posts: 7



(Msg. 1) Posted: Wed Jan 05, 2005 11:35 am
Post subject: Matshita UJDA710 drive no longer burns?
Archived from groups: comp>sys>ibm>pc>hardware>cd-rom (more info?)
I have a Matshita UJDA710 CD burner in my Toshiba Satellite S5004. It will
read CD's just fine, but will not burn them. I tried using NTI and Nero,
both generate an error when attempting to burn CD's (error log from Nero
posted below).

Is this a driver issue or somethign else? Upon reading the Toshiba web site
it appears that the drivers should be included in WinXP, and since this is a
fairly common burner I would think that Nero would support it.

(error log follows):

user

1A23-0026-9030-1831-8297-7892

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <MATSHITA UJDA710> Version: 1.50 - HA 2 TA 0 -
6.3.0.3
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJDA710 >Version: 1.50 - HA 2 TA 0 -
6.3.0.3
Adapter driver: <atapi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Toshiba Sm Host Driver 0000 pciSm Port 0 ID 0
DMA: Off
DiskPeripheral : TOSHIBA MK3017GAP atapi Port 1 ID 0
DMA: On
CdRomPeripheral : MATSHITA UJDA710 atapi Port 2 ID 0
DMA: On

=== CDRom-Device-Map ===
MATSHITA UJDA710 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 216MB (221852kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.1.2005
CD-ROM (ISO)
10:05:06 AM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:05:06 AM #2 Text 0 File Reader.cpp, Line 118
Reader running

10:05:06 AM #3 Text 0 File Writer.cpp, Line 124
Writer MATSHITA UJDA710 running

10:05:06 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:05:06 AM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

10:05:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 320783 ( 71:19.0Cool

10:05:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:05:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: MATSHITA UJDA710;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B
47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)

10:05:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
=========================================

10:05:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 320784 (320784) = #320784/71:17.9
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
320782 blocks [MATSHITA UJDA710 ]
--------------------------------------------------------------

10:05:07 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [MATSHITA UJDA710 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
657272832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
320784 | lead-out | 1 | 0x00 | 0x41

10:05:07 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 320784 -> 320782.

10:05:07 AM #13 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

10:05:07 AM #14 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

10:05:07 AM #15 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

10:05:07 AM #16 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (1,200 KB/s)

10:05:07 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

10:05:16 AM #18 SCSI -1106 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x045E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

10:05:16 AM #19 CDR -1106 File Writer.cpp, Line 301
Power calibration error

10:05:16 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:05:16 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:05:16 AM #22 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
MATSHITA UJDA710\H2 T0

10:05:16 AM #23 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

10:05:16 AM #24 Text 0 File Mmc.cpp, Line 14323
<MATSHITAUJDA710 > start Close Session

10:05:17 AM #25 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:05:17 AM #26 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.10 (99), size=22681 bytes, created
9/17/2001 6:58:33 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656
bytes, created 8/18/2001 7:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Matshita UJDA710 drive no longer burns? 
Back to top
Login to vote
Owen

External


Since: Feb 16, 2005
Posts: 1



(Msg. 2) Posted: Wed Feb 16, 2005 8:42 am
Post subject: Re: Matshita UJDA710 drive no longer burns? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Did you ever get this fixed? I've had a similar problem on my Toshiba
Satellite S504: The UJDA710 CD stops working partially, then
completely. I've sent the laptop in once to have the drive replaced
(they put in another UJDA710) and now (about a year later) the drive is
not working again. Last time, it wouldn't burn CD-Rs. Now it will
neither read nor burn CD-R's and is beginning to not read regular CDs.
So far it will still play DVDs but even that's getting flaky. I'LL
NEVER BUY ANOTHER TOSHIBA MACHINE AGAIN! I had to fight with the tech
support for over a month (and re-install the operating system) before
they would even consider repairing the drive. They finally condescended
to me sending in the computer, then kept it for a MONTH while they
replaced the drive (and re-formatted the hard drive again, just for
good measure) which is now broken again -- and now out of warranty!

DON'T BUY TOSHIBA!

Owen

DesignGuy wrote:
 > I have a Matshita UJDA710 CD burner in my Toshiba Satellite S5004. It
will
 > read CD's just fine, but will not burn them. I tried using NTI and
Nero,
 > both generate an error when attempting to burn CD's (error log from
Nero
 > posted below).
 >
 > Is this a driver issue or somethign else? Upon reading the Toshiba
web site
 > it appears that the drivers should be included in WinXP, and since
this is a
 > fairly common burner I would think that Nero would support it.
 >
 > (error log follows):
 >
 > user
 >
 > 1A23-0026-9030-1831-8297-7892
 >
 > Windows XP 5.1
 > IA32
 > WinAspi: -
 > ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll':
Ver=2.0.1.59,
 > size=160016 bytes, created 12/16/2003 7:18:06 PM
 > Nero version: 6.3.0.3
 > Recorder: <MATSHITA UJDA710> Version: 1.50 - HA 2
TA 0 -
 > 6.3.0.3
 > Adapter driver: <atapi> HA 2
 > Drive buffer : 2048kB
 > Bus Type : default (0) -> ATAPI, detected: ATAPI
 > CD-ROM: <MATSHITA UJDA710 >Version: 1.50 - HA 2
TA 0 -
 > 6.3.0.3
 > Adapter driver: <atapi> HA 2
 >
 > === Scsi-Device-Map ===
 > DiskPeripheral : Toshiba Sm Host Driver 0000 pciSm Port 0
ID 0
 > DMA: Off
 > DiskPeripheral : TOSHIBA MK3017GAP atapi Port 1
ID 0
 > DMA: On
 > CdRomPeripheral : MATSHITA UJDA710 atapi Port 2
ID 0
 > DMA: On
 >
 > === CDRom-Device-Map ===
 > MATSHITA UJDA710 E: CDRom0
 > =======================
 >
 > AutoRun : 1
 > Excluded drive IDs:
 > CmdQueuing : 1
 > CmdNotification: 2
 > WriteBufferSize: 74448896 (0) Byte
 > ShowDrvBufStat : 0
 > EraseSpeed : 0
 > BUFE : 0
 > Physical memory : 511MB (523760kB)
 > Free physical memory: 216MB (221852kB)
 > Memory in use : 57 %
 > Uncached PFiles: 0x0
 > Use Static Write Speed Table: 0
 > Use Inquiry : 1
 > Global Bus Type: default (0)
 > Check supported media : Disabled (0)
 >
 > 5.1.2005
 > CD-ROM (ISO)
 > 10:05:06 AM #1 Text 0 File Isodoc.cpp, Line 6029
 > Iso document burn settings
 > ------------------------------------------
 > Determine maximum speed : FALSE
 > Simulate : FALSE
 > Write : TRUE
 > Finalize CD : FALSE
 > Multisession : TRUE
 > Multisession type: : Start multisession
 > Burning mode : TAO
 > Mode : 1
 > ISO Level : 1 (Max. of 11 = 8 + 3 char)
 > Character set : ISO 9660
 > Joliet : TRUE
 > Allow pathdepth more than 8 directories : TRUE
 > Allow more than 255 characters in path : TRUE
 > Write ISO9660 ;1 file extensions : TRUE
 >
 > 10:05:06 AM #2 Text 0 File Reader.cpp, Line 118
 > Reader running
 >
 > 10:05:06 AM #3 Text 0 File Writer.cpp, Line 124
 > Writer MATSHITA UJDA710 running
 >
 > 10:05:06 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
 > First writeable address = 0 (0x00000000)
 >
 > 10:05:06 AM #5 Text 0 File Burncd.cpp, Line 3101
 > Turn on Track-at-once, using CD-R/RW media
 >
 > 10:05:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 240
 > Last possible write address on media: 359845 ( 79:59.70)
 > Last address to be written: 320783 ( 71:19.0Cool
 >
 > 10:05:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
 > Write in overburning mode: FALSE
 >
 > 10:05:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2085
 > Recorder: MATSHITA UJDA710;
 > CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
 > ATIP Data:
 > Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66),
3: 4F 3B
 > 47 (LO 79:59.71)
 > Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00
(invalid), 3:
 > 00 00 00 (invalid)
 >
 > 10:05:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 406
   > >>> Protocol of DlgWaitCD activities: <<<
 > =========================================
 >
 > 10:05:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
 > Setup items (after recorder preparation)
 > 0: TRM_DATA_MODE1 (CTransferItem)
 > 2 indices, index0 (150) not provided
 > original disc pos #0 + 320784 (320784) = #320784/71:17.9
 > relocatable, disc pos for caching/writing not required/required,
no
 > patch infos
 > -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
length
 > 320782 blocks [MATSHITA UJDA710 ]
 > --------------------------------------------------------------
 >
 > 10:05:07 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
 > Prepare recorder [MATSHITA UJDA710 ] for write in TAO
 > DAO infos:
 > ==========
 > MCN: ""
 > TOCType: 0x00; Session Closed, disc not fixated
 > Tracks 1 to 1:
 > 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
 > 657272832, ISRC ""
 > DAO layout:
 > ===========
 > __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
 > -150 | lead-in | 0 | 0x00 | 0x41
 > -150 | 1 | 0 | 0x00 | 0x41
 > 0 | 1 | 1 | 0x00 | 0x41
 > 320784 | lead-out | 1 | 0x00 | 0x41
 >
 > 10:05:07 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 994
 > Removed 2 run-out blocks from end of track 1. Length: 320784 ->
320782.
 >
 > 10:05:07 AM #13 Phase 24 File dlgbrnst.cpp, Line 1800
 > Caching of files started
 >
 > 10:05:07 AM #14 Text 0 File Burncd.cpp, Line 4073
 > Cache writing successful.
 >
 > 10:05:07 AM #15 Phase 25 File dlgbrnst.cpp, Line 1800
 > Caching of files completed
 >
 > 10:05:07 AM #16 Phase 36 File dlgbrnst.cpp, Line 1800
 > Burn process started at 8x (1,200 KB/s)
 >
 > 10:05:07 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
 > Verifying disc position of item 0 (relocatable, disc pos, no patch
infos,
 > orig at #0): write at #0
 >
 > 10:05:16 AM #18 SCSI -1106 File Cdrdrv.cpp, Line 1431
 > SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x045E0000
 > Status: 0x04 (0x01, SCSI_ERR)
 > HA-Status 0x00 (0x00, OK)
 > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 > Sense Key: 0x03 (KEY_MEDIUM_ERROR)
 > Sense Code: 0x73
 > Sense Qual: 0x03
 > CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00
0x00
 > Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
 > 0x00 0x00 0x00 0x00 0x73 0x03
 >
 > 10:05:16 AM #19 CDR -1106 File Writer.cpp, Line 301
 > Power calibration error
 >
 > 10:05:16 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
 > all writers idle, stopping conversion
 >
 > 10:05:16 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
 > conversion idle, stopping reader
 >
 > 10:05:16 AM #22 CDR -201 File WriterStatus.cpp, Line 196
 > Invalid write state
 > MATSHITA UJDA710\H2 T0
 >
 > 10:05:16 AM #23 TRANSFER -18 File WriterStatus.cpp, Line 196
 > Could not perform EndTrack
 >
 > 10:05:16 AM #24 Text 0 File Mmc.cpp, Line 14323
 > <MATSHITAUJDA710 > start Close Session
 >
 > 10:05:17 AM #25 Text 0 File dlgbrnst.cpp, Line 1658
 > Set remaining time: 0:00,000 (0ms) -> OK
 >
 > 10:05:17 AM #26 Phase 38 File dlgbrnst.cpp, Line 1800
 > Burn process failed at 8x (1,200 KB/s)
 >
 >
 > Existing drivers:
 > File 'Drivers\CDRALW2K.SYS': Ver=5.10 (99), size=22681 bytes, created
 > 9/17/2001 6:58:33 PM
 > File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
 > 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
 > File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148),
size=86656
 > bytes, created 8/18/2001 7:00:00 AM (Adapter driver for rec)
 >
 > Registry Keys:
 > HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs :
 > 0 (Security Option)<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Matshita UJDA710 drive no longer burns? 
Back to top
Login to vote
gary

External


Since: Feb 20, 2005
Posts: 1



(Msg. 3) Posted: Sun Feb 20, 2005 10:00 am
Post subject: Re: Matshita UJDA710 drive no longer burns? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I am having a very similar problem with my Sony DRU-540A. This is a
fairly new CD/DVD burner. I worked with Sony and seemingly confirmed
that the problem was the result of a firmware update from A to B. A
new drive was sent to me and has the same problem - I'm unable to write
but can read fine. I have been digging and have a suspicision that
that the problem is the result of installing Adobe Photoshop Elements
3.0. It seems to have included a driver from Sonic named PXHELP20.SYS.
This driver appears in my list of drivers under both my CD and DVD
drives. I think it realates to a camera/CD monitoring interface to
capture new images. I'm looking for a means to disable this driver.
Turning off the camera monitoring function in APSE 3.0 didn't do it.
Here is a vary intriguing link that initiated my suspicison:
http://www.anti-spy.info/process/pxhelp20.sys.html.
 >> Stay informed about: Matshita UJDA710 drive no longer burns? 
Back to top
Login to vote
bob

External


Since: Mar 20, 2005
Posts: 2



(Msg. 4) Posted: Sun Mar 20, 2005 8:13 am
Post subject: Re: Matshita UJDA710 drive no longer burns? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 > I have been digging and have a suspicision that
 > that the problem is the result of installing Adobe Photoshop Elements
 > 3.0.

Hello, just to say that PxHelp20! is not coming from Adobe Photoshop
Elements.

I have this PxHelp20! on my computer but I don't have Photoshop...

I'm using a Dell Computer and Xp was installed when I receive my
computer.

AnyDvd detect this application and say that it's a spyware but Adaware
from Lavasoft doesn't detect this application !!!!!!!!!!!!!!!!!!!!

I will try with Spybot if it detect PxHelp20!.

Bye<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Matshita UJDA710 drive no longer burns? 
Back to top
Login to vote
bob

External


Since: Mar 20, 2005
Posts: 2



(Msg. 5) Posted: Sun Mar 20, 2005 8:44 am
Post subject: Re: Matshita UJDA710 drive no longer burns? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
gary RemoveThis @gapk.net wrote in message news:<1108922433.641223.271450 RemoveThis @c13g2000cwb.googlegroups.com>...
 > I have been digging and have a suspicision that
 > that the problem is the result of installing Adobe Photoshop Elements

This follows my first message.

AnyDvd detected that Pxhelp20! prents my CD-ROM to work properly.

AnyDvd removed this from the registry.

AnyDvd detected another one (sorry I didn't keep the name...) and
after it detected sscdbhk5! another piece of sheet who was preventing
my cdrom to work properly...<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Matshita UJDA710 drive no longer burns? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Matshita UJDA710 no longer burns? - I have a Matshita UJDA710 CD burner in my Toshiba Satellite S5004. It will read CD's just fine, but will not burn them. I tried using NTI and Nero, both generate an error when attempting to burn CD's (error log from Nero posted below). Is this a driver....

software for matshita CD-RW -7586 - software for matshita CD-RW -7586 a "mate" installled this CD-RW with appropriate software. Since installing Windows XP the drive is not recognized.What software do I need to over come this?

Using CD-ROM Drive DAC - Somebody knows if it is possible to send data to the DAC of a CDROM device? My idea is to reproduce sounds using the exit of sound of the CDROM unit Thanks.

cd drive modification - I was wondering if anyone here has worked on the firmware or digital control logic inside CDR/W drives and is willing to give me a few pointers. As part of an electronics engineering project I would like to experiment with recording images directly to..

Need help with cr rom drive! hp Pavilion - Hi ~ Forgiv me if this is a stupid question, but my CD Rom drive in my HP Pavilion 7915 is dead. It will not load software, it will not play a music cd, it won't do anything. The power is there, becuase the door opens, the indicator light comes on, ..
   Hardware Problem Solving Community! (Home) -> CDRom All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]