Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

NF7-S Memory

  
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  something must be wrong right?  
Author Message
Ian Pollard1

External


Since: Jul 27, 2004
Posts: 3



(Msg. 1) Posted: Wed Jul 28, 2004 12:50 am
Post subject: NF7-S Memory
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
I am intending to put a further 512MB of memory to add to 512MB
already present. Is there a "proper" position for the modules. At the
moment, I have one module of 512MB in position 3. What is the correct
position for two 512MB modules please?

Ian

--
Ian Pollard//Wooler//Northumberland//UK
M0FLC

 >> Stay informed about: NF7-S Memory 
Back to top
Login to vote
David Besack1

External


Since: May 27, 2004
Posts: 44



(Msg. 2) Posted: Wed Jul 28, 2004 12:50 am
Post subject: Re: NF7-S Memory [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 > I am intending to put a further 512MB of memory to add to 512MB
 > already present. Is there a "proper" position for the modules. At the
 > moment, I have one module of 512MB in position 3. What is the correct
 > position for two 512MB modules please?

You can put them anywhere and they will work.

For dual-channel to be enabled, put one in slot 3 and the other in
either slot 1 or 2.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: NF7-S Memory 
Back to top
Login to vote
Ian Pollard1

External


Since: Jul 27, 2004
Posts: 3



(Msg. 3) Posted: Wed Jul 28, 2004 1:07 pm
Post subject: Re: NF7-S Memory [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Tue, 27 Jul 2004 18:23:28 -0400, David Besack
<daveREMOVEbesack.RemoveThis@mac.com> wrote:

  >> I am intending to put a further 512MB of memory to add to 512MB
  >> already present. Is there a "proper" position for the modules. At the
  >> moment, I have one module of 512MB in position 3. What is the correct
  >> position for two 512MB modules please?
 >
 >You can put them anywhere and they will work.
 >
 >For dual-channel to be enabled, put one in slot 3 and the other in
 >either slot 1 or 2.

Many thanks, will do that.

Ian

--
Ian Pollard//Wooler//Northumberland//UK
M0FLC<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: NF7-S Memory 
Back to top
Login to vote
Shawk

External


Since: Aug 20, 2004
Posts: 126



(Msg. 4) Posted: Sun Aug 01, 2004 4:29 am
Post subject: Re: NF7-S Memory [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Ian Pollard" <m0flc.RemoveThis@yahoo.co.uk> wrote in message
news:36reg0lkdojukeendt6f28m4uh39k60dbj@4ax.com...
 > On Tue, 27 Jul 2004 18:23:28 -0400, David Besack
 > <daveREMOVEbesack.RemoveThis@mac.com> wrote:
 >
   > >> I am intending to put a further 512MB of memory to add to 512MB
   > >> already present. Is there a "proper" position for the modules. At the
   > >> moment, I have one module of 512MB in position 3. What is the correct
   > >> position for two 512MB modules please?
  > >
  > >You can put them anywhere and they will work.
  > >
  > >For dual-channel to be enabled, put one in slot 3 and the other in
  > >either slot 1 or 2.
 >
 > Many thanks, will do that.
 >
 > Ian
 >
 > --
 > Ian Pollard//Wooler//Northumberland//UK
 > M0FLC

FYI have mine in slot 2 and 3 and they work fine. Shaun<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: NF7-S Memory 
Back to top
Login to vote
OCZ Guy

External


Since: Jun 30, 2004
Posts: 99



(Msg. 5) Posted: Sun Aug 01, 2004 10:23 pm
Post subject: Re: NF7-S Memory [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Dual Chan working fine on my 2.0 version of the board, not sure if it
makes ANY difference but ts working Smile


On Sun, 1 Aug 2004 01:29:28 +0100, "Shawk"
<shawk DeleteThis @clara.co.uk.3guesses> wrote:

 >
 >"Ian Pollard" <m0flc DeleteThis @yahoo.co.uk> wrote in message
 >news:36reg0lkdojukeendt6f28m4uh39k60dbj@4ax.com...
  >> On Tue, 27 Jul 2004 18:23:28 -0400, David Besack
  >> <daveREMOVEbesack DeleteThis @mac.com> wrote:
  >>
   >> >> I am intending to put a further 512MB of memory to add to 512MB
   >> >> already present. Is there a "proper" position for the modules. At the
   >> >> moment, I have one module of 512MB in position 3. What is the correct
   >> >> position for two 512MB modules please?
   >> >
   >> >You can put them anywhere and they will work.
   >> >
   >> >For dual-channel to be enabled, put one in slot 3 and the other in
   >> >either slot 1 or 2.
  >>
  >> Many thanks, will do that.
  >>
  >> Ian
  >>
  >> --
  >> Ian Pollard//Wooler//Northumberland//UK
  >> M0FLC
 >
 >FYI have mine in slot 2 and 3 and they work fine. Shaun
 >

HELLO NURSE.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: NF7-S Memory 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
NF7-S Memory? - Hi folks - I need some help sorting through all the choices out there.- I plan on getting an NF7-S and would like to run a mobile 2500+ barton. "Some" gaming , some video related stuff (recording & playback) along w/ office related apps wi...

nf7 s memory - I had a stick of pc 2100 memory and everything worked ok. I installed a stick of pc2700 512. I had to clear the cmos to boot with the memory. It will boots at ddr333 but will not let me change the cpu speed in soft menu setup. If I finally get the cpu..

AN7 memory problem - My problem: I've got a AN7 mobo and 2 512MB-CL2,5-DDR400-Twinmos sticks. Abit manual says: We suggest you to install DDR SDRAM modules from DIMM3 to DIMM1 in order. If I put one stick alone in the mobo, each stick is running fine in slot 3, but not in....

AI7 and Corsair Memory - Folks Have ordered an AI7 and 1Gb matched Corsair Value PC3200 memory but am struggling with understanding the subject of memory timings. Have checked Corsair's site but there are no figures given there. 2.8GHz P4 also on the way. Anyone help a...

IS7-V memory question. - This may be a stupid question but I'm still in the BX world. The IS7-V uses single channel DDR 400. What's the difference between single channel and dual? Is it the memory that's different or is the difference in the mobo. What I'm getting at is some one...
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]