Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

NF7-S not POSTing

  
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  Chaintech 9CJS  
Author Message
marke1uk

External


Since: Jul 15, 2007
Posts: 1



(Msg. 1) Posted: Sun Jul 15, 2007 1:52 pm
Post subject: NF7-S not POSTing
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
after a few days eventually got the machine to post by removing the
cmos battery and resetting values, once fired up its fine and
stable,however if it is shutdown it will not post again unless the
battery is removed and everything reset .I have tried replacing the
cmos battery but doesent make any difference.any suggestions would be
appreciated.

 >> Stay informed about: NF7-S not POSTing 
Back to top
Login to vote
farmuse

External


Since: Apr 14, 2005
Posts: 45



(Msg. 2) Posted: Tue Aug 21, 2007 1:28 am
Post subject: Re: NF7-S not POSTing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
marke1uk RemoveThis @ntlworld.com wrote:
> after a few days eventually got the machine to post by removing the
> cmos battery and resetting values, once fired up its fine and
> stable,however if it is shutdown it will not post again unless the
> battery is removed and everything reset .I have tried replacing the
> cmos battery but doesent make any difference.any suggestions would be
> appreciated.
>
brand new battery ? next maybe try a new flash of BIOS

 >> Stay informed about: NF7-S not POSTing 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
NF7-S 2.0 not posting - Case/PSU: Antec 350W Corsair RAM 512 I do believe AMD Barton 2500+ Built this system for a friend of mine. Its been working great until today. The machine just doesn't post, no system beeps, just power to the fans and drives. I had him reset the cmos..

IS7 not posting - I've got a new IS7 mothrboard and it will not post. 5VSB led comes on, but the moment I press power, the VCC light flickers on, fans come on, then it all goes dead. 2.8 p4 HT 1gb DDR400 120mb wd hard driver 300 watt power supply ATI Radeon 9600 I..

No Posting on NF7 - Is it possible to damage a motherboard bas changing CPU fsb and multiplier? I tried booting my T-bird 1.3 (100*13) at 166*5. Should have booted at ~830 MHz but instead I got nothing, ie. no post. Since then I've cleared the CMOS numerous times and....

Running Dual Boot with 98SE and XP Pro SP1 - I have a dual boot system on an Abit BD7II-R with 98SE on an old Seagate ATA33 HDD on Primary IDE 1 Master and a Lite-On CD-RW Primary Slave. Secondary IDE 2 Master is a LG GSA-4040B DVD-RAM with NO slave. My WinXP Pro is on Primary IDE 3 & 4 as a RA...

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage Newsgroup, I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]