On Fri, 31 Aug 2007 00:10:24 +0000, rms wrote:
> Just a note that I tried this on a KN8 + Opteron170 + geminII setup, and it
> worked fine, and did drop temps from AS5 a couple degrees. With Prime95
> running on both cores at 2.8ghz.TakeThisOut@1.41v it peaks at 53C at about 28C ambient.
>
> As an afterthought I put it on both ends of the chipset heatpipe heatsink
> and saw temps actually rise a couple degrees. But I suspect this is bogus,
> as I think the tempsensing chip is also underneath the heatsink and didn't
> get any compound on it, because it sits lower than the voltage regulators
> and I didn't think about it. The stock thick tape that I removed probably
> touch it. In any case system temps never rise above 38C.
>
> Anyway, thumbs up on MX-2, though I think they were stingy with the syringe,
> it looks like 2 applications is all it will do.
>
Bummer. I get about 5,000 applications with the 99 cent thermal compund I
use that I bought about 30 years ago, which also worked better than the
original thermal compound. My X2 3800+ maxes out at about 55C with a
system temp of 40C with both cores close to 100%. But my cooler only cost
$6.95, a TR2-M6. What was that P.T. Barnum used to say...
--
Want the ultimate in free OTA SD/HDTV Recorder?
http://mythtv.org
http://mysettopbox.tv/knoppmyth.html Usenet alt.video.ptv.mythtv
My server
http://wesnewell.no-ip.com/cpu.php
HD Tivo S3 compared
http://wesnewell.no-ip.com/mythtivo.htm
FAQ
Profile
Private Messages
Log in
