Opinions please

In article <JYxUb.446$Y%6.76004@wards.force9.net>,
NOTmatthew.TakeThisOut@REALdeadlym.com says...
 > Your case temps especially are to high
 > you'll get random crashes and possibly harddrive failure if you go on like
 > that

I just built a Abit NF7-S, with a Antec SLK3700-BQE case. I have 120mm
fans on either end, a Thermalright S-97, and a Duron 1.6 that I am
running at 12x200 for 2400Mhz. CPU temp under load is 41, case temp is
26 no matter what. It was only $76.00 from NewEgg, and it includes an
Antec SmartPower 350w power supply. An incredible value, I think.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please 

 > I just built a Abit NF7-S, with a Antec SLK3700-BQE case. I have 120mm
 > fans on either end, a Thermalright S-97, and a Duron 1.6 that I am
 > running at 12x200 for 2400Mhz.

Great OC, i've thus far managed to take a sneak peak at winxp at that
frequency .
I was somewhat on the budget when i made the motherboard decision so i went
for the leadtek ncr18d-pro(~72$), and it's worth it in all respects except
for the lack of vdd setting.

What's your story with vdd, vcc ?

 > CPU temp under load is 41, case temp is
 > 26 no matter what. It was only $76.00 from NewEgg, and it includes an
 > Antec SmartPower 350w power supply. An incredible value, I think.

Yup, that's the temp i measured while i was running the setup *out of the
box* <!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please 

In article <bvuc0d$hd7$1@ls219.htnet.hr>, taurus.DeleteThis@email.hinet.hr says...
 > What's your story with vdd, vcc ?
 >

CPU core is at 1.78 (BIOS says something like 1.
and DDR is running at default, 2.62.

I could probably put a little more volts to the Duron and shoot for
something higher, but I don't want to look a gift horse in the mouth.
She's rock solid, so far.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please 

In article <bvuc0d$hd7$1@ls219.htnet.hr>, taurus DeleteThis @email.hinet.hr says...
 > What's your story with vdd, vcc ?
 >
Oh...I guess that's not what you wanted to know, is it.
I'm not quite sure what the abbreviations mean, but the
CPU is 1.78, Core 1 says 2.62, then I have 3.26 and 4.95 volts,
according to MBM

What are you running the CPU core at? I started at 150/150 and had to
bump it a few times to get past the bootscreen. I am now inclined to
leave very well enough alone!


Have fun,

CF<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please 

"Deadly_M" <NOTmatthew.TakeThisOut@REALdeadlym.com> wrote in message
news:JYxUb.446$Y%6.76004@wards.force9.net...
 > Your case temps especially are to high
 > you'll get random crashes and possibly harddrive failure if you go on like
 > that
 >
 > possibly review the airflow in your case , i find lots of folks have fans
 > fighting against each other

Could be, i've got this MSI "350W" psu with two fans but i believe one of
them is blowing inward instead out, and even if that's not the case it's
still way to chummy for my foxconn 5600RPM monster + there's no place to
place the front propeller - liquid nitrogen time...

 >
 > blow in at the bottom with as many fans as you like , but only blow out at
 > the top with your PSU fan.
 > my case temps are 24 degrees , room temp is 21
 >
 > "flekso" <taurus.TakeThisOut@email.hinet.hr> wrote in message
 > news:bvqsqi$1i5$1@ls219.htnet.hr...
  > > How about these temperatures for Duron 1600 overclocked to 2.3 GHz:
  > >
  > > <a style='text-decoration: underline;' href="http://members.lycos.co.uk/muhaha1981/" target="_blank">http://members.lycos.co.uk/muhaha1981/</a> ,
  > >
  > > thanks.
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please 

"Bilar Crais" <bilar.DeleteThis@crais.commie> wrote in message
news:MPG.1a8c78f1d3d1eb77989683@news...
 > In article <bvuc0d$hd7$1@ls219.htnet.hr>, taurus.DeleteThis@email.hinet.hr says...
  > > What's your story with vdd, vcc ?
  > >
 > Oh...I guess that's not what you wanted to know, is it.
 > I'm not quite sure what the abbreviations mean, but the
 > CPU is 1.78, Core 1 says 2.62, then I have 3.26 and 4.95 volts,
 > according to MBM
 >
 > What are you running the CPU core at? I started at 150/150 and had to
 > bump it a few times to get past the bootscreen. I am now inclined to
 > leave very well enough alone!

I'm currently at 1.725V(1.71 MBM) for cpu, but i was wondering about your
vdd(nforce voltage), since that is the only other component that could stand
between me and a 200 FSB, and my mobo doesn't have the option (curses)

Also, i guess i have some PSU troubles cause whenever i raise the vcc over
1.75 i can't even get to POST(should be other way around) + aida32 shows
that line jumping from 1.71 all the way down to 1.69 and back again + my -5V
line shows only -4.09~4.14 + my agp line is a bit scanty at 1.47 ???

But i guess for 43 buckos 2312MHz athlon isn't so shabby

 >
 >
 > Have fun,
 >
 > CF<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Opinions please