Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Opinions on a value machine...

 
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  KV7: can't create RAID: linux recognises always t..  
Author Message
Bruin

External


Since: Aug 15, 2004
Posts: 54



(Msg. 1) Posted: Mon Mar 07, 2005 6:05 pm
Post subject: Opinions on a value machine...
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)

A buddy of mine wants me to help him assemble a new machine for him. He has
a limited budget ($500.00 US), doesn't need a CD ROM or monitor.
Below is my selection of some decent (cheap) components that I have
selected.

POWMAX CP769PL-2 Beige Steel ATX Mid Tower Computer Case w/ 400 watt PS
$34.50

Leadtek Geforce 6600 128MB DDR PCI-Express x16 Video Card
$109.00

Western Digital Caviar SE WD800JD 80 GB 7200 RPM Hard Drive
$68.00

CHAINTECH VNF4/Ultra Socket 939 NVIDIA nForce4 Ultra ATX AMD Motherboard
Model #: VNF4/Ultra
$99.00

Rosewill 512MB DDR400(PC3200) System Memory
$47.00


AMD Athlon 64 3000+ Winchester Socket 939 Processor
$165.00

Total inc'l shipping: $517.48 Just over his budget.

I got a POWMAX case for my family computer & was quite surprised about how
much I like it. I could go for another brand of hard drive & get 160 gig
for not alot more money.

Other than that... opinions?

I am posting this in several newsgroups in the hopes for getting alot of
responses fast as he needs to order these parts ASAP, before his wife
changes her mind! Wink

 >> Stay informed about: Opinions on a value machine... 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
k7dd dual cpu machine - im having stability issues ive noticed its fine on everyday usage but in more demanding things like gaming its crashing the game my cpus 1800+mps should run at 1.75v tho the motherboard reads slightly under that at 1.74 is this ok or is this likely t...

Opinions needed on a Chaintech motherboard.... - What do people think of the Chainteck 7NJS Ultra Zenith motherboard? Is it a very good board for overclocking an AMD Barton chip? Can it go beyond 200Mhz FSB speed? Cheers, Darth Joules

7VJL Apogee how too O/C XP2400? - I have run my pc at mem 166 cpu 150 and booted into linux ok. so I think i am able to over clock this chip pretty good. I do not want to have my pci spec so far out though. How do you unlock the multipliers? I though all xp2400 were factory unlocked? I...

BIOS CHIPS : New Replacement Bios Chips or Re - Flash - visit www.bioschips.webhop.net For Replacement chips $14 re-flash of existing chip $8

Handigator - Rellay need some help. Hust installed a new 9cjs and everything seems to be working ok except the Handigator. Are there drivers, bois setting's, etc required to get this to work? Do I need to install IR support to XP? Any help will be great. Steve
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]