P4DC6

FAQ

Profile

P4DC6

Hardware Problem Solving Community! (Home) -> Supermicro

Next: Shipping Boxes

Author

Message

Adysthemic

External

Since: Jan 11, 2004
Posts: 9

(Msg. 1) Posted: Mon Dec 27, 2004 4:00 pm Post subject: P4DC6 Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)

Group, I have a P4DC6 MB that has some problems.It has 2 1.7ghz Xeons,2gigs ram.This unit would freeze up everyday.I removed 1.gig of ram from socket 0.Freezing went away.Bingo bad ram.Nope.Ordered new ram.Now it will not even boot with ANY ram populating socket 0.Motherboard fried?Or are there other explanations? Adysthemic >> Stay informed about: P4DC6

Display posts from previous:

Related Topics:

P4DC6+ and Hyperthreading - I've got hyperthreading enabled in the BIOS on my P4DC6+ (dual Xeon 2.4's) and XP Professional shows 4 processors OK, but I'm not sure things are working correctly. When I start a CPU-intensive process like WinRAR, the first CPU in Task Manager pegs....

P4DC6+ Max CPU Speed - Has anyone tried a 603pin XEON greater than 2.4GHz on this motherboard? I'm looking at upgrading my processors and all I can find is that Supermicro says 2.4 is all they have tested to therefore can't give a reliable answer as to whether the newer 2.6..

Linux + P4DC6+ , Sound problems . - Hi, i Have a p4dc6+ with linux on it, its running vary well, but i cant seem to get the onboard sound adapter to work, im using SuSe8.2. The recommended driver for this adapter is snd-intel8x0.o, but when i modprobe it it gives me errors, and...

P4DC6+ BIOS and SATA Question - I am running BIOS rev 1.2c on the P4DC6+. I just installed 2 new Hitachi 7K250 160GB SATA drives, attached to a Promise TX2Plus controller card. The controller supports 2 parallel ATA drives in addition to 2 SATA drives. I have two Western Digital....

370DLI - Hi there I am having a supermicro 370DLI and I unknowing of the 100MHz limitation I bought 2 1Ghz processors and because of the 100MHz bus speed problem I am only able to run them at 750MHz each. Has anybody managed to modify the board to be able to ru...

	Hardware Problem Solving Community! (Home) -> Supermicro	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum