|
Related Topics:
| Boot-up Issues P4X400 Lite - Any Sys powers up, no video, no beebing sounds, cpu fan turns. I cleared CMOS; Not sure about any other jumpers; Using a Celeron 2.6 478 128KB L2 400 FSB, power is 475 watts, CPU is connected to CPUFAN1, I removed the board from the case and..
Sound problems (mostly DOS) on P4X400 - Mobo: P4X400 Dragon Lite Sound card: SB Live! 5.1 Gamer Having trouble getting these two buggers to work together nicely. Sound in Linux and Windows is just fine, but when it comes to SB16 emulation in DOS, nothing works. I've followed the
Realtek NIC on P4X400 Ultra - The Realtek LAN chip on this board places a fixed IP in my TCP/IP when used with a cable modem. Is there a way around this and is it a common problem or defective 8100b chip? When I put in a NIC card in a PCI slot, the card works fine, but I need the..
P4X400 Dragon Lite - Hi, I just got this last nigth, I have a Celeron 2.0 and 256MB. I'm trying to install Win XP on a 20 GB HDD, I'll boot from CD, I'll do the partition and then starts gets to 100% and then I'll give me a message about unable to format, disk..
trouble with P4X400 LAN port? - Bought a Soyo P4X400 MoBo in May, installed it, upgraded BIOS (from 2AA4 to AA9), and installed W2k on it. Have since applied SP4 to W2k. Updated all my other hardware drivers at thta time. I have another PC running on a home LAN. Both PCs are running.
|
|
|
Next: Starting Problem, even fans do not spin etc.
|
| Author |
Message |
External
Since: Nov 30, 2006
Posts: 1
|
(Msg. 1) Posted: Thu Nov 30, 2006 8:02 am
Post subject: P4X400 Issues w/ XP Pro Lockup/Freeze
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)
|
|
|
Well well well....
Im not sure if I could tweak the settings in the mobo to make this run
smoother, or is the mobo junk?? I have Swapped out Power Supply, CPU,
Fan/Heatsink, Audio Card, and even tried running a new windows install
on a different hard drive. The windows setup will just freeze about 1/4
of the way through. I have the On board Audio disabled, along with IRQ
for AGP and IRQ for USB disabled. I have tuned down the GFX card
(nVidia GeForce4 440MX) settings in BIOS as well, disabled flash write,
and the Master 1 Write/Read disabled. I also have AGP Shadow BIOS
disabled as well. Ive moved ram into all 3 of the slots, and Ive tried
my single PnP item on slot 2 and 5 which have IRQ Mapping. I am at a
loss where to go from here!! |
|
| Back to top |
|
 | |
|
FAQ
Search
Profile
Private Messages
Log in
