Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

P5K-Deluxe how to flash BIOS

  
   Hardware Problem Solving Community! (Home) -> Overclocking RSS
Related Topics:
Bios Flash? - No .rom file is in the flash zip do I get at that

how to recover my ti4200 bios after a flash failure? - Hi, I used nvflash to flash the bios of ti4200 and was fine until i reboot... black screen (the monitor is ON and not in power saving mode...), no post beep, and no boot... then i plugged a pci video card and i tried to flash my agp card..

how to recover my ti4200 bios after a flash failure? - Hi, I used nvflash to flash the bios of ti4200 and was fine until i reboot... black screen (the monitor is ON and not in power saving mode...), no post beep, and no boot... then i plugged a pci video card and i tried to flash my agp card..

P4C800 Deluxe-E - Hi all, I have a Asus P4C800 Deluxe-E with a P4 2.6c to 3.2GHz with of 33c idle and about 45-48c on full load. Also PC3200 Corsair RAM. The PC is very stable in general and also when running PCMark04 and however..

P4C800 Deluxe overclocking - Where can I find BIOS settings for I have P4C800 deluxe, P4 2.8c with 2x256mb 3500 corsair black 433mhz. I'm new in this so please help.
Author Message
Zeno

External


Since: Oct 13, 2007
Posts: 2



(Msg. 1) Posted: Sat Oct 13, 2007 9:45 pm
Post subject: P5K-Deluxe how to flash BIOS
Archived from groups: alt>comp>hardware>overclocking (more info?)
I've been trying to flash the BIOS using the EZ-Flash inbuilt program
but I have a problem that it wont recognise my 1Gb flash drive (actually
its an MP3 player but is recognised just like a flash drive).

If I set it to be emulated as "floppy" or "forced FDD" then when I start
EZ-Flash the screen flashes about a dozen times and then a message
saying ti cant read the drive (only A: (real floppy drive) and B:
(emulated drive) are shown.

If I set emulation to hard disk then the screen flashes continuosly in
EZ-Flash (dont know for how long as I gave up after 2 minutes).

Any other emulation setting (CD or Auto) just results in no drive being
detected by EZ-Flash.

I would normally use a floppy disk but seing as the rom images for this
board are 2MB each I cant with this motherboard.

Im am loath to try the windows flasher as I know how often this program
fails and "bricks" motherboards.

I've tried the drive flashed as both FAT and as FAT32 but it makes no
difference.

Any ideas?

 >> Stay informed about: P5K-Deluxe how to flash BIOS 
Back to top
Login to vote
Kent_Diego

External


Since: Jan 28, 2006
Posts: 60



(Msg. 2) Posted: Sat Oct 13, 2007 9:45 pm
Post subject: Re: P5K-Deluxe how to flash BIOS [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I have had good luck booting off CD to NTFS4DOS and running DOS files on
hard drive. NTFS4DOS is on Hiren's Boot CD often found on
alt.binaries.warez. Flashing from floppy disk is dangerous as floppies can
have corrupt files and my ruin flash.
http://www.freewarefiles.com/program_9_90_11100.html I made a bootable
NTFS4DOS CD from floppy version using Nero

 >> Stay informed about: P5K-Deluxe how to flash BIOS 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Overclocking All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]