Welcome to PCForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Q6600

 
   Hardware Problem Solving Community! (Home) -> Overclocking RSS
Next:  P5K Premium Logo soft ?  
Author Message
AJJ

External


Since: Oct 17, 2007
Posts: 1



(Msg. 1) Posted: Wed Oct 17, 2007 12:41 am
Post subject: Q6600
Archived from groups: alt>comp>hardware>overclocking (more info?)

Hi. I'm interested in overclocking my quad core Q6600. Any usefull tips or
links would be greately appreciated.
System sepc:
Intel quad core Q6600
Asus striker extreme
OCZ 4GB gold 2x2GB DDR2 800
GeForce 8800 GTS
nice Asus cooler keeping my idle temps to around 30C
Thanks.
AJJ...

 >> Stay informed about: Q6600 
Back to top
Login to vote
Ed M.

External


Since: Aug 31, 2007
Posts: 34



(Msg. 2) Posted: Wed Oct 17, 2007 8:01 am
Post subject: Re: Q6600 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"AJJ" wrote in message

> Hi. I'm interested in overclocking my quad core Q6600. Any usefull tips or
> links would be greately appreciated.
> System sepc:
> Intel quad core Q6600
> Asus striker extreme
> OCZ 4GB gold 2x2GB DDR2 800
> GeForce 8800 GTS
> nice Asus cooler keeping my idle temps to around 30C
> Thanks.
> AJJ...

I have the same board and the Q6600 (G0 stepping) liquid cooled and can
get it up to 3.5Ghz with a lot of Vcore......too much really. I run it 24/7
with the Vcore on "Auto" up to 1488fsb (3.35Ghz) but it seems to take a ton
of voltage to go above an fsb of over 1500. You should be able to go to 3Ghz
easily with just the stock cooler. Remember the "actual" stock Vcore on this
processor is around 1.24v or so. The Striker Extreme will give it up to 1.3v
on auto if it needs it for stability so start on Auto and see how far you
can go in small steps with the fsb. I would not recommend a Vcore of more
than 1.35v with air because they start heating up a lot about there. Keep
your memory down very low while working on the processor OC to keep it out
of the equation and work on that later. Good luck and keep us posted on your
results.


Ed Medlin

Q6600
Asus Striker Extreme
2X EVGA Superclocked 8800GTX SLI
Mushkin Extreme PC9200 2x1gb
4X SATAII 500gb WD
2X LiteOn DVDRW 1IDE 1SATA
PC P&C Silencer 850w PSU
Swiftech Quiet Power 180 Liquid Cooled Case

 >> Stay informed about: Q6600 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Q6600 - danger? - Hello. Just some questions, might sound stupid to some of you, but: I have a Q6600 on P5K @ 2.40 GHz. Just bought OCZ ram - PC9200, max freq is 1150 MHz. To get them running at this speed, I had to set the FSB to 288 (was 266) and the mutliplier to 9....

mobo for Q6600? - What's a good mobo for overclocking core 2 quad Q6600, using DDR2 ram? Is there any advantage using P35 based board? This is for video editing/encoding. So any type of video slot is ok (AGP PCI-E....).

Problem with P5B and Q6600 CPU - Hi, today I replaced my old Core2Duo E6600 with a new quad core Q6600 CPU (B3 stepping). After switching CPUs, I find, that my P5B board (with BIOS 1604) does not accept my manuel vcore settings anymore. Whatever I set it to, it will stay at 1.2 v....

how overclock with P5N32E-SLI with Q6600? - I have a Asus P5N32E-SLI with Q6600 but when i set FSB click at 1333 the system don't start and i need to reset by motherboard with jumper. Where is the problem? Where i can find a descrition od operation to do to correct overclock? -- Ciao

Q6600 good deal? - Core 2 quad Q6600 sells for under $280. Does that make it the best overclockable CPU deal? Normally, you have to pay more than double in order to double the performance. In this case, is Q6600 equal to two core 2 duo E6600s but the price is only 1.5x....
   Hardware Problem Solving Community! (Home) -> Overclocking All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]