Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

New Router - Old PC cards

 
   Hardware Problem Solving Community! (Home) -> PC Networking RSS
Next:  Dlink 704P Losing WAN Connection  
Author Message
Tim11

External


Since: Jan 24, 2004
Posts: 1



(Msg. 1) Posted: Sat Jan 24, 2004 11:45 pm
Post subject: New Router - Old PC cards
Archived from groups: comp>sys>ibm>pc>hardware>networking (more info?)

I have an old wired network using a:
Netgear DS104 hub and 2 netgear FA310TX PC cards and a DSL modem.
card specs: http://shop.cyberstorage.com/product_info.php?products_id=314

I've just ordered a:
Netgear Wireless Bundle - WGR614 Router AND WG511 Wireless PC card (so that
I can get my laptop in the 'loop'.)
router specs: http://www.buy.com/retail/product.asp?sku=10342463&loc=14683

Question:
Can I use the old FA310TX PC cards (in the 2 desktops) with the new WGR614
Router??

-----
I've also read that I will not need the hub anymore and that I also won't
need any of the "internet connection software" anymore. IE: WinPoet, Zone
Alarm, and whatever else is there?

Question:
What should I uninstall/delete and in what order? (before or after new
wireless install?)
Or should I just disable?
anything else?

I useWin98se.

Thanks for any help or advice.
Tim

 >> Stay informed about: New Router - Old PC cards 
Back to top
Login to vote
Yousuf Khan2

External


Since: Jan 09, 2004
Posts: 64



(Msg. 2) Posted: Tue Feb 03, 2004 3:42 pm
Post subject: Re: New Router - Old PC cards [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Tim" <none DeleteThis @noplace.com> wrote in message
news:vPAQb.23225$i4.13645@newsread1.news.atl.earthlink.net...
 > Question:
 > Can I use the old FA310TX PC cards (in the 2 desktops) with the new WGR614
 > Router??

Of course! Most wireless routers also include a wired component to it. In
fact, you'll find that the wired component of your router is superior to
your old hub, because the new one acts like a switch. A switch is a more
sophisticated hub that intelligently optimizes traffic between PCs and the
Internet.

 > I've also read that I will not need the hub anymore and that I also won't
 > need any of the "internet connection software" anymore. IE: WinPoet, Zone
 > Alarm, and whatever else is there?

Yes, your new router will act as your firewall (ZoneAlarm) as well as your
PPPoE client (WinPoet).

I would keep the ZoneAlarm enabled though, even with the new router in
place. ZoneAlarm really doesn't take up too much in the way of resources,
and it's always nice to have it already setup and active just in case you
ever need to connect up one of your machines directly to the DSL modem for
whatever reasons. Plus while ZoneAlarm is active, even if it is behind
another firewall, it can be protecting your machines from each other. You
never know if someday a Trojan gets into one of your PCs, so having the
ZoneAlarm protecting your other machines means that your whole network isn't
owned.

 > Question:
 > What should I uninstall/delete and in what order? (before or after new
 > wireless install?)
 > Or should I just disable?
 > anything else?

I wouldn't uninstall anything until after you've installed the new router.
I'd then uninstall the WinPoet, and that's it.

 > I useWin98se.

If you were using at least Win2000 then you wouldn't have needed WinPoet,
PPPoE features were built into Windows as of Windows 2000 and XP.

Yousuf Khan<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: New Router - Old PC cards 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Using a Wireless router as a hub ?? - Hi all, I have the following A linksys 4port Gateway/Router (BEFSR41) and a wireless router DLink DI 614+ All the wired computers are connected to the linksys gateway and a dataport is connected to the WAN port of the DLink wireless gateway. I have..

Linksys Router - I went into Best Buy to purchase a Linksys Router BEFSR41 and they had some ver. 2 and ver. 3's. The only difference I could see was that ver. 3 said CISCO on it and had fewer lights. Upon further comparison, the Ver. 3 does not have the uplink port. Can...

Can someone recommend a Router? - I currently own an ACCTON AC-IG1004 and it is very user unfriendly, easy to get running but extremely difficult to configure because of poor documentation and very poor online help and very very poor phone support. I'm not very good with anything to do..

Router Woes with Blueyonder - i have purchased a netgear cable/dsl web safe router gateway, model number rp614 and am having a great deal of trouble getting it running. i have read this forum with great interest. the network is set up ok locally, i.e. the router is accessible on..

Router drops connection - Got a Netgear RP614. Have Comcast cable. It keeps dropping the connection. Not on a regular basis, more like a few times a week. I find this strange because when it was directly connected to 1 PC and then shared across the network with Microsoft ICS,...
   Hardware Problem Solving Community! (Home) -> PC Networking All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]