Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

S2895 K8WE dead after BIOS 1.05

  
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Related Topics:
BIOS 1.03 available for K8WE (S2895) - There is a new BIOS 1.03, for the K8WE (S2895). Enjoy! :-) Jim

New K8WE Thunder (S2895) BIOS 105 Available - I was cruising the new Tyan site tonight, and I noticed a new 105 BIOS for the K8WE Thunder (S2895) It installed like a charm. I don't know whether everybody already knew about it. Enjoy! :-) Jim

Tyan S2895 / K8WE BIOS 1.04 "out of space for Option ROMs!" - I have a Tyan Thunder K8WE / S2895 and just upgraded the BIOS to the lastest version 1.04 Now the BIOS hangs up during booting, and it says: "out of space for Option what does this mean? I disabled a couple of on-board devices (e.g. SCSI).

K8WE S2895...when? - anyone know when this MB is to be in supply? Thanks! ofd

S2895 K8WE - How do I know if my setup is running in NUMA mode in Windows XP Pro SP 2? Thanks! -- Scotter
Author Message
z1Barry

External


Since: Jun 13, 2007
Posts: 2



(Msg. 1) Posted: Wed Jun 13, 2007 9:06 am
Post subject: S2895 K8WE dead after BIOS 1.05
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
I need help ! My trusty S2895 2x275 Opteron 2 year old system does not
respond after flashing from BIOS 1.03 to 1.05. System powers
up ..beeps twice ..fans are all running ..mouse and keyboard light
up , but nothing displays on the monitor. I hit the CMOS reset switch
but no help. I have made no other changes to my system ! I also tried
a different monitor but that didnt help either . OUCH .. do I need a
new BIOS chip ?

any help or advice would be appreciated

 >> Stay informed about: S2895 K8WE dead after BIOS 1.05 
Back to top
Login to vote
BC

External


Since: Oct 15, 2005
Posts: 45



(Msg. 2) Posted: Thu Jun 14, 2007 5:35 pm
Post subject: Re: S2895 K8WE dead after BIOS 1.05 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
z1Barry wrote:

> I need help ! My trusty S2895 2x275 Opteron 2 year old system does not
> respond after flashing from BIOS 1.03 to 1.05. System powers
> up ..beeps twice ..fans are all running ..mouse and keyboard light
> up , but nothing displays on the monitor. I hit the CMOS reset switch
> but no help. I have made no other changes to my system ! I also tried
> a different monitor but that didnt help either . OUCH .. do I need a
> new BIOS chip ?
>
> any help or advice would be appreciated

Dear Barry,

with the 'clear CMOS' step, did you wait 10 minutes?

From

http://www.tyan.com/tech/how_to_flash.aspx

***
After flashing your BIOS or upgrading your BIOS it is always a good
practice to physically clear the CMOS jumper. Even though the flash
utility has a trigger that should clear the CMOS after the flash it does
not always complete this. To be 100% sure that the flash has taken
place clear the CMOS jumper and unplug the power supply from the
motherboard. Wait for 10 minutes and then reset the CMOS jumper back to
pins 1 and 2 and plug the power supply back to the motherboard. This
will make sure that the flash is correctly applied to the motherboard.
***

Also, I have had to take out the CMOS battery, and let the unplugged
motherboard sit with the clear CMOS jumper set for about half an hour or
so....

Oh, and one more thing....did you flash 1.03 to 1.04, then 1.04 to 1.05?
In my experience, Tyan boards do not like it when you skip a BIOS update....

Since you run a killer nice board, I assume you used a DOS disk and hit
F5 during the clean boot to make sure no memory resident programs were
loaded....

If all else fails, there is this replacement BIOS chip source:

http://www.badflash.com/

Or, Tyan recommends:

http://www.biosman.com/

I do think that flashing to 1.04, then to 1.05 may work....

HTH,

BC

 >> Stay informed about: S2895 K8WE dead after BIOS 1.05 
Back to top
Login to vote
z1Barry

External


Since: Jun 13, 2007
Posts: 2



(Msg. 3) Posted: Fri Jun 15, 2007 8:55 am
Post subject: Re: S2895 K8WE dead after BIOS 1.05 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
The problem was a change made by Tyan to BIOS v1.05. My video card was
in a secondary PCIe slot. The new BIOS disabled Option ROM scan for
this slot
which caused my graphics card placed in that slot not to function.
This was all according to Tyan.
 >> Stay informed about: S2895 K8WE dead after BIOS 1.05 
Back to top
Login to vote
Jim

External


Since: Jun 16, 2007
Posts: 3



(Msg. 4) Posted: Sat Jun 16, 2007 7:38 am
Post subject: Re: S2895 K8WE dead after BIOS 1.05 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Jun 15, 10:55 am, z1Barry <barry.c... RemoveThis @verizon.net> wrote:
> The problem was a change made by Tyan to BIOS v1.05. My video card was
> in a secondary PCIe slot. The new BIOS disabled Option ROM scan for
> this slot
> which caused my graphics card placed in that slot not to function.
> This was all according to Tyan.

Barry,

Thanks for posting back to the list!

That's the problem with *all* this stuff. Although computers are
supposed to be rational, logical, machines; they are only rational and
logical to the people whom designed them. If you do not know
*exactly* how the company designed it, no amount of calm, rational,
thought will enable you to figure them out. The solution may be
perfectly logical to the person who designed the machine, but somebody
on the outside trying to figure it out may have no clue what is
wrong. I can not possibly count the number of times similar things
have happened to me. They are only clear in hindsight.

I am glad you were able to solve your problem. Many times one can
not.

Right now, for example, I am trying to install some monitoring
software on an x64 system. The installer software says that the
software cannot run because it only works on a 64-bit system. I *am*
running a 64-bit system! Meanwhile the program refuses to install.
These computers are an endless series of frustrations.

Good luck! Smile

Jim
 >> Stay informed about: S2895 K8WE dead after BIOS 1.05 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]