 |
|
|
|
Next: Processor Speed
|
| Author |
Message |
External
Since: Nov 19, 2005
Posts: 18
|
(Msg. 1) Posted: Wed Nov 23, 2005 3:55 pm
Post subject: SATA and PATA on ECS K8T890-A
Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)
|
|
|
|
|
| Back to top |
|
 | |
| Related Topics: | Help with new sata hdd - Can anyone help me to instal sata hdd. I've tried to find the sata tool on the MB installation disk without success. MB is KM400-M2
SATA FIX!! - ECS tech finally got it through to me that there is a hardware issue --you can't have a primary IDE and a SATA? so i disabled the primary channel and it found the SATA drive "0' Master right away - no need to use the f6 option during setup ect. ...
Can't Install SATA?????? - i have an 848P-A ECS motherboard and i cannot get it to see the SATA hard drive?? i have 2 IDE connected to IDE 1 and IDE 2 , @ cd rom/dvd on the secondary channel, have enabled SATA Enhanced mode in the bios(auto didn't see it either)?? i don't know...
KT600-A - IDE RAID or just SATA RAID? - Was looking at the Fry's special (ECS KT600-A & AMD 2600+ for $80), and was wondering if the motherboard supported IDE RAID, or only SATA RAID. The web site is very ambiguous, and looking at the manual & box didn't really clear anything up (neit...
755-A2 sata drive slow - I have a 10,000 rpm Raptor drive attatched to the onboard sata controller on a ECS 755-A2 motherboard. I have run benchmark speed tests on this drive using various tools. The raptor drive seems to be running a lot slower than the previously installed.. |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
