|
Related Topics:
| My Shuttle SB95P V2 - Hello, I could not find much info on this model when I was shopping, I got one anyway, and here are the details of my system. SB95P V2 with 2.8GHz P4, single 1G RAM chip (room for another), Sapphire ATI X600XT video, DVD ROM, 60G ATA, 2 x WD Raptor 73G.
WANTED: SV24 PCI riser card replacement - Anyone have a 90 degree one-slot PCI riser card that fits the SV24 chassis such that the PCI device installed will place the card at the correct height (at the height required to put the card's at the knock-out on the back of the..
No POST with Shuttle SS51G - Hi. I just bought a Shuttle SS51G, RAM, etc. through NewEgg and put it together. I'm getting no POST. The Power LED on the front of the case lights up, the fan and drives spin, and the LED on the system board lights up. ..
AN35N Ultra BIOS Problem?? - Hi, I am having some troulbes getting the AN35N Ultra I bought to recognize my WD 160G/8M HDD. What I have done: -First, I used the WDC Data LifeGuard Tools to partition the new HDD; the tool can see the size as 160G. But when I start to..
I'm deparate. How do I get a TV to work from sn41g2? - Hi I have to get my machine working into a TV before next How do I do it? I've tried TV to the phono adaptor supplied and I've looked for TV drivers under Monitor and on the NVidia CD but I've had no luck. I need to..
|
|
|
Next: Athlon 64 X2 5200+ Temps
|
| Author |
Message |
External
Since: Mar 30, 2007
Posts: 2
|
(Msg. 1) Posted: Fri Mar 30, 2007 4:02 pm
Post subject: SB95P does nothing
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
|
|
|
hi, I have bought a barebones system from Microdirect, and added a 2.4
GHz Core2 1066Mhz FSB CPU, Geil dual channel 2x1Gb 800 Mhz memory, and
nvidia geforce 7300 le, when powered up it does not beep, but fans and
dvd power up, there is no signal to the monitor, a green mainboard led
VDIMM is lit
removing all components and using various combinations has no effect,
have contacted shuttle and await reply, previous posts here suggest
memory config may be problem but am not in position to experiment
feel frustrated, but accept such problems commonly occur with diy
systems |
|
| Back to top |
|
 | |
External
Since: Jan 21, 2007
Posts: 40
|
(Msg. 2) Posted: Fri Mar 30, 2007 8:25 pm
Post subject: Re: SB95P does nothing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
paul wrote:
> hi, I have bought a barebones system from Microdirect, and added a 2.4
> GHz Core2 1066Mhz FSB CPU, Geil dual channel 2x1Gb 800 Mhz memory, and
> nvidia geforce 7300 le, when powered up it does not beep, but fans and
> dvd power up, there is no signal to the monitor, a green mainboard led
> VDIMM is lit
>
> removing all components and using various combinations has no effect,
> have contacted shuttle and await reply, previous posts here suggest
> memory config may be problem but am not in position to experiment
>
> feel frustrated, but accept such problems commonly occur with diy
> systems
>
Sounds like CPU is defective-you also need to insure that all power
supply voltages are present, which they probably are. |
|
| Back to top |
|
| |
External
Since: Sep 17, 2005
Posts: 60
|
(Msg. 3) Posted: Sat Mar 31, 2007 5:57 pm
Post subject: Re: SB95P does nothing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 30 Mar 2007 16:02:13 -0700, "paul" <leehanken.RemoveThis@gmail.com> had a
flock of green cheek conures squawk out:
>hi, I have bought a barebones system from Microdirect, and added a 2.4
>GHz Core2 1066Mhz FSB CPU, Geil dual channel 2x1Gb 800 Mhz memory, and
>nvidia geforce 7300 le, when powered up it does not beep, but fans and
>dvd power up, there is no signal to the monitor, a green mainboard led
>VDIMM is lit
>
>removing all components and using various combinations has no effect,
>have contacted shuttle and await reply, previous posts here suggest
>memory config may be problem but am not in position to experiment
>
>feel frustrated, but accept such problems commonly occur with diy
>systems
CPU fan plugged into the correct header?
All power connectors plugged in? Usually two on the motherboard and
some video cards use one.
Clear CMOS jumper on the correct pins?
Stephen
-- >> Stay informed about: SB95P does nothing |
|
| Back to top |
|
| |
External
Since: Mar 30, 2007
Posts: 2
|
(Msg. 4) Posted: Wed Apr 04, 2007 9:58 am
Post subject: Re: SB95P does nothing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 31 Mar, 22:59, Stephen <y....DeleteThis@its.invalid> wrote:
> On 30 Mar 2007 16:02:13 -0700, "paul" <leehan....DeleteThis@gmail.com> had a
> flock of green cheek conures squawk out:
>
> >hi, I have bought a barebones system from Microdirect, and added a 2.4
> >GHz Core2 1066Mhz FSB CPU, Geil dual channel 2x1Gb 800 Mhz memory, and
> >nvidia geforce 7300 le, when powered up it does not beep, but fans and
> >dvd power up, there is no signal to the monitor, a green mainboard led
> >VDIMM is lit
>
> >removing all components and using various combinations has no effect,
> >have contacted shuttle and await reply, previous posts here suggest
> >memory config may be problem but am not in position to experiment
>
> >feel frustrated, but accept such problems commonly occur with diy
> >systems
>
> CPU fan plugged into the correct header?
> All power connectors plugged in? Usually two on the motherboard and
> some video cards use one.
> Clear CMOS jumper on the correct pins?
>
> Stephen
> --
the manufacturer has pointed me towards recommended hardware, i.e. the
CPU saying the board is not advanced enough for the one I tried
i have tried changing the CPU, also changing the graphics card and
memory, and this makes no difference
thanks for the various suggestions as to what might be wrong
I am sure it is something simple like that and I will look into each
one >> Stay informed about: SB95P does nothing |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in
