SN41G2, USB & XP

run windows update, and see if it updates the drivers

On Fri, 15 Aug 2003 11:24:38 +0100, "Mehbs"
<mehbs_s.RemoveThis@no.spam.yahoo.com> wrote:

 >I recently pruchased this and configured it with Win XP (SP1). I also
 >installed the latest 2.45 nforce drivers from nvidia. However, when I insert
 >a USB (1.1) pen drive in any of the sockets, XP detects it, freezes and then
 >automatically reboots the system!
 >
 >When I check device manager, the USB controller is listed as Standard PCI
 >USB HCI. Should this not read USB 2.0 controller?
 >
 >System Spec is SN41G2 with:
 >
 >AMD 2500+ (Barton)
 >Corsair 512MB PC2700
 >Lite-On 52x CDRW
 >40GB Maxtor Plus 8 HD
 >Windows XP (SP1)
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: SN41G2, USB & XP 

I did that but it made very little difference.

"foolish501" <foolish501 RemoveThis @yahoo.com> wrote in message
news:skbqjvkp6eha8nl80mgq309k1q7hrisdmu@4ax.com...
 > run windows update, and see if it updates the drivers
 >
 > On Fri, 15 Aug 2003 11:24:38 +0100, "Mehbs"
 > <mehbs_s RemoveThis @no.spam.yahoo.com> wrote:
 >
  > >I recently pruchased this and configured it with Win XP (SP1). I also
  > >installed the latest 2.45 nforce drivers from nvidia. However, when I
insert
  > >a USB (1.1) pen drive in any of the sockets, XP detects it, freezes and
then
  > >automatically reboots the system!
  > >
  > >When I check device manager, the USB controller is listed as Standard PCI
  > >USB HCI. Should this not read USB 2.0 controller?
  > >
  > >System Spec is SN41G2 with:
  > >
  > >AMD 2500+ (Barton)
  > >Corsair 512MB PC2700
  > >Lite-On 52x CDRW
  > >40GB Maxtor Plus 8 HD
  > >Windows XP (SP1)
  > >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: SN41G2, USB & XP 

That's what I had but it made XP freeze before causing the PC to reboot.
I've also tried to uninstall all these devices so that XP redetects them
automatically but I still get the same effect.

I've since reverted to Win 2000 SP4 (+ updates) and it all works fine?! Go
figure! I still like to have XP installed though.

"Jan Bruun Andersen" <OIRZQQPYOETK DeleteThis @spammotel.com> wrote in message
news:7dab6ffb.0308151727.283e193e@posting.google.com...
 > "Mehbs" <mehbs_s DeleteThis @no.spam.yahoo.com> wrote in message
news:<1060943079.436989 DeleteThis @ernani.logica.co.uk>...
  > > I recently pruchased this and configured it with Win XP (SP1). I also
  > > installed the latest 2.45 nforce drivers from nvidia. However, when I
insert
  > > a USB (1.1) pen drive in any of the sockets, XP detects it, freezes and
then
  > > automatically reboots the system!
  > >
  > > When I check device manager, the USB controller is listed as Standard
PCI
  > > USB HCI. Should this not read USB 2.0 controller?
 >
 > I have the following listed:
 >
 > Standard Enhanced PCI to USB Host Controller
 > Standard OpenHCD USB Host Controller
 > Standard OpenHCD USB Host Controller
 > USB Root Hub
 > USB Root Hub
 > USB Root Hub<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: SN41G2, USB & XP 

On my SB61G2 Shuttle, I have the same problems. It seems there is a
difference between the frontside USB and backside USB ports. I can use the
backside ones without problem. The frontside USB ports are useless. Trying
to get the pc card reader PC12 to work didn't succeed. It connects to the
USB4 port on the motherboard. Probably the same problem.
Reading that it works fine with Windows 2000 make my worry that this is a XP
problem........

Regards, Rudi

"Mehbs" <mehbs_s.DeleteThis@no.spam.yahoo.com> schreef in bericht
news:1061198144.7303@ernani.logica.co.uk...
 > That's what I had but it made XP freeze before causing the PC to reboot.
 > I've also tried to uninstall all these devices so that XP redetects them
 > automatically but I still get the same effect.
 >
 > I've since reverted to Win 2000 SP4 (+ updates) and it all works fine?! Go
 > figure! I still like to have XP installed though.
 >
 > "Jan Bruun Andersen" <OIRZQQPYOETK.DeleteThis@spammotel.com> wrote in message
 > news:7dab6ffb.0308151727.283e193e@posting.google.com...
  > > "Mehbs" <mehbs_s.DeleteThis@no.spam.yahoo.com> wrote in message
 > news:<1060943079.436989.DeleteThis@ernani.logica.co.uk>...
   > > > I recently pruchased this and configured it with Win XP (SP1). I also
   > > > installed the latest 2.45 nforce drivers from nvidia. However, when I
 > insert
   > > > a USB (1.1) pen drive in any of the sockets, XP detects it, freezes
and
 > then
   > > > automatically reboots the system!
   > > >
   > > > When I check device manager, the USB controller is listed as Standard
 > PCI
   > > > USB HCI. Should this not read USB 2.0 controller?
  > >
  > > I have the following listed:
  > >
  > > Standard Enhanced PCI to USB Host Controller
  > > Standard OpenHCD USB Host Controller
  > > Standard OpenHCD USB Host Controller
  > > USB Root Hub
  > > USB Root Hub
  > > USB Root Hub
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: SN41G2, USB & XP