Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

SN85G4L and USB connectors

  
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Next:  Replacement plastic shells for jump drives?  
Author Message
Harkin

External


Since: Nov 22, 2005
Posts: 2



(Msg. 1) Posted: Tue Nov 22, 2005 1:12 pm
Post subject: SN85G4L and USB connectors
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
I purchased the little two port USB adapter that goes into the top rear
opening on my Shuttle. Unless I am completely missing it I do not see any
available headers to connect it to. Do I need to remove one of the existing
connections in order to use these ports? I would be pretty irritated if that
is the case, but at least I would know. -TIA

 >> Stay informed about: SN85G4L and USB connectors 
Back to top
Login to vote
Stephen

External


Since: Sep 17, 2005
Posts: 60



(Msg. 2) Posted: Wed Nov 23, 2005 12:55 pm
Post subject: Re: SN85G4L and USB connectors [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Tue, 22 Nov 2005 13:12:45 -0500, "Harkin"
<nospam.TakeThisOut@dont.send.any.spam.here.gmail.com> had a flock of green cheek
conures squawk out:

>I purchased the little two port USB adapter that goes into the top rear
>opening on my Shuttle. Unless I am completely missing it I do not see any
>available headers to connect it to. Do I need to remove one of the existing
>connections in order to use these ports? I would be pretty irritated if that
>is the case, but at least I would know. -TIA
>

At the front left corner of the FN85 motherboard there are three usb
headers. A 9 pin header and two 5 pin sockets. On my SN85G4V3, the
usb card reader uses one of them.

Stephen
--

 >> Stay informed about: SN85G4L and USB connectors 
Back to top
Login to vote
Harkin

External


Since: Nov 22, 2005
Posts: 2



(Msg. 3) Posted: Mon Nov 28, 2005 11:20 am
Post subject: Re: SN85G4L and USB connectors [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
*snip*
> At the front left corner of the FN85 motherboard there are three usb
> headers. A 9 pin header and two 5 pin sockets. On my SN85G4V3, the
> usb card reader uses one of them.
>
> Stephen
> --

I located that connection to the daughterboard for the media connector I
presume that I don't have. I connected the new rear ports to that and they
work just fine, almost. For some reason my USB ports are pretty flaky (not a
new problem). After a random time interval a device will just just stop
working. I use a wireless Linksys USB NIC and it connects fine when I first
power up, but then it will just drop the NIC from the system. I had a USB
hub attached to a port and after a random time it would cut off the devices
and the hub. I use a USB keyboard and mouse and they do not appear to be
effected like the other devices. Strange. This occurs on both the front and
rear ports.
 >> Stay informed about: SN85G4L and USB connectors 
Back to top
Login to vote
Stephen

External


Since: Sep 17, 2005
Posts: 60



(Msg. 4) Posted: Tue Nov 29, 2005 4:55 pm
Post subject: Re: SN85G4L and USB connectors [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Mon, 28 Nov 2005 11:20:16 -0500, "Harkin"
<nospam.DeleteThis@dont.send.any.spam.here.gmail.com> had a flock of green cheek
conures squawk out:

>*snip*
>> At the front left corner of the FN85 motherboard there are three usb
>> headers. A 9 pin header and two 5 pin sockets. On my SN85G4V3, the
>> usb card reader uses one of them.
>>
>> Stephen
>> --
>
>I located that connection to the daughterboard for the media connector I
>presume that I don't have. I connected the new rear ports to that and they
>work just fine, almost. For some reason my USB ports are pretty flaky (not a
>new problem). After a random time interval a device will just just stop
>working. I use a wireless Linksys USB NIC and it connects fine when I first
>power up, but then it will just drop the NIC from the system. I had a USB
>hub attached to a port and after a random time it would cut off the devices
>and the hub. I use a USB keyboard and mouse and they do not appear to be
>effected like the other devices. Strange. This occurs on both the front and
>rear ports.
>

Check to see if there are any power saving settings for the usb ports
and disable them. You should find those settings in the device
manager for the ports.

Stephen
--
 >> Stay informed about: SN85G4L and USB connectors 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Noise on sound from front-connectors on SB61G2 - Hi, Have SB61G2 running with Windows XP SP1. When using the earphone and mic-connector in the front there is a lot of noise -- even when not playing any sounds on the PC. No problems when using the connectors in back of the PC. The SB61G2 uses the..

WANTED: SV24 PCI riser card replacement - Anyone have a 90 degree one-slot PCI riser card that fits the SV24 chassis such that the PCI device ultimately installed will place the card at the correct height (at the height required to put the card's inputs/outputs at the knock-out on the back of th...

No POST with Shuttle SS51G - Hi. I just bought a Shuttle SS51G, RAM, Processor, etc. through NewEgg and put it together. Unfortunately, I'm getting no POST. The Power LED on the front of the case lights up, the fan and drives spin, and the LED on the system board lights up. ..

AN35N Ultra BIOS Problem?? - Hi, I am having some troulbes getting the AN35N Ultra I bought to recognize my WD 160G/8M HDD. What I have done: -First, I used the WDC Data LifeGuard Tools to partition the new HDD; the tool can see the size as 160G. But when I start to..

I'm deparate. How do I get a TV to work from sn41g2? - Hi I have to get my machine working into a TV before next Wednesday. How do I do it? I've tried connecting TV to the phono adaptor supplied and I've looked for TV drivers under Monitor properties and on the NVidia CD but I've had no luck. I need to..
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]